AL Storz Coupling-Long Shank

AL Storz Coupling-Long Shank — aluminium Storz head with a long hose shank for banding or crimping. Cast aluminium 1"–6"; forged aluminium 2"–6". Forged Aluminum: 6061 T6; Casted Aluminum: A356. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Storz Coupling / Adapter
- Coupling Type / Variant: Storz Coupling & Adapter — Storz Coupling-Long Shank
- End A Configuration: Storz head
- End B Configuration: Long hose shank, for banding or crimping
- Size Range: Casted Aluminum 1" to 6"; Forged Aluminum 2" to 6"
- Coupling Family
- Storz Coupling / Adapter
- Coupling Type / Variant
- Storz Coupling & Adapter — Storz Coupling-Long Shank
- End A Configuration
- Storz head
- End B Configuration
- Long hose shank, for banding or crimping
- Size Range
- Casted Aluminum 1" to 6"; Forged Aluminum 2" to 6"
Product description
The AL Storz Coupling-Long Shank is a Storz Coupling / Adapter from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Storz Coupling / Adapter
- Coupling type: Storz Coupling & Adapter — Storz Coupling-Long Shank
- End A: Storz head
- End B: Long hose shank, for banding or crimping
Specifications
- Size range: Cast aluminium 1"–6"; forged aluminium 2"–6"
- Material: Forged Aluminum: 6061 T6; Casted Aluminum: A356
- Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.
- Seal: Discharge gasket in the head as standard; suction gasket to order (Sunpool code S)
- Standard: Made to the DIN Storz pattern (Sunpool does not give the standard number)
Manufacturer notes
- Storz Coupling with long shank for binding or crimping.
- Anodized or vibration finished is available by request.
- Conformed to DIN Standard.
About the family
Storz is a symmetrical hose coupling: every head is identical, with two hooked lugs and a ring, so there is no male or female half. Two heads of the same size are pressed face to face and turned until the lugs lock. A Storz size is identified by the distance across its lugs, which is why two heads made for nearly the same hose bore can be different sizes. Sunpool makes the range in cast aluminium (A356), forged aluminium (6061-T6), brass, bronze and stainless steel: long-shank hose couplings, thread adapters, fire department connection fittings, safety-latch couplings and adapters, gaskets and clamps.
Selection and service notes
Match the Storz size, not just the hose bore: check the lug distance or the size marking. Each joint seals on the gasket in the face of the heads, so inspect it at every make-up; Sunpool fits a discharge gasket as standard and a suction gasket to order. A safety latch stops the heads turning apart where a hose is dragged or vibrates. Storz does not connect to cam and groove, Guillemin or threaded fittings without an adapter.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Storz coupling sizes and lug distances.
Sunpool sizes
Sunpool makes this coupling in cast aluminium 1"–6" and forged aluminium 2"–6". A Storz size is identified by its lug distance, the measurement across the two lugs, which is what tells sizes with the same hose bore apart. Order by the Indus part number in the size table or by the Sunpool part number for the material you need.
| Hose size | Storz size | Lug distance (mm) | Sunpool part no., Cast aluminium | Sunpool part no., Forged aluminium |
|---|---|---|---|---|
| 1" | 25D | 31 | SZ-AL-25-L | — |
| 1-1/4" | 32 | 44 | SZ-AL-32-L | — |
| 1-1/2" | 38 | — | SZ-AL-40-L | — |
| 2" | 52C | 66 | SZ-AL-50-L | SZ-AF-50-L |
| 2-1/2" | 65 | 81 | SZ-AL-65-L | SZ-AF-65-L |
| 3" | 75B | 89 | SZ-AL-75-L | SZ-AF-75-L |
| 4" | 100 | 115 | SZ-AL-100-L | SZ-AF-100-L |
| — | 110A | 133 | SZ-AL-110-L | SZ-AF-110-L |
| 5" | 125 | 148 | SZ-AL-125-L | SZ-AF-125-L |
| 6" | 150 | 160 | SZ-AL-150-L | SZ-AF-150-L |
Sizes, dimensions and part numbers from Sunpool’s catalogue page for this part and its Storz part-number list, checked 7 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Storz Coupling / Adapter |
| Coupling Type / Variant | Storz Coupling & Adapter — Storz Coupling-Long Shank |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Storz head |
| End B Configuration | Long hose shank, for banding or crimping |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | Casted Aluminum 1" to 6"; Forged Aluminum 2" to 6" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Forged Aluminum: 6061 T6; Casted Aluminum: A356 |
| Seal / Gasket | Discharge gasket in the head as standard; suction gasket to order (Sunpool code S) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | Made to the DIN Storz pattern (Sunpool does not give the standard number) |
Notes
| Parameter | Value |
|---|---|
| Notes | Storz Coupling with long shank for binding or crimping. Anodized or vibration finished is available by request. Conformed to DIN Standard. |
Shipping & lead time
Sizes & part numbers
10 sizes- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-25
- Nominal size
- 1" (Storz 25D)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-32
- Nominal size
- 1-1/4" (Storz 32)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-38
- Nominal size
- 1-1/2" (Storz 38)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-52
- Nominal size
- 2" (Storz 52C)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-65
- Nominal size
- 2-1/2" (Storz 65)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-75
- Nominal size
- 3" (Storz 75B)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-100
- Nominal size
- 4" (Storz 100)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-110
- Nominal size
- Storz 110A
Show all 10 sizesShow fewer sizes
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-125
- Nominal size
- 5" (Storz 125)
- Indus part no.IH-STZ-STORZ-COUPLING-LONG-SHANK-150
- Nominal size
- 6" (Storz 150)
What is the AL Storz Coupling-Long Shank and what is it used for?▾
How do I read the part numbers of the AL Storz Coupling-Long Shank, such as IH-STZ-STORZ-COUPLING-LONG-SHANK-25?▾
What sizes does the AL Storz Coupling-Long Shank come in?▾
How do I choose the right size of the AL Storz Coupling-Long Shank?▾
What is the working pressure of the AL Storz Coupling-Long Shank?▾
What is the AL Storz Coupling-Long Shank made of?▾
What standard does the AL Storz Coupling-Long Shank conform to?▾
What does the AL Storz Coupling-Long Shank connect to?▾
How should the AL Storz Coupling-Long Shank be inspected and maintained?▾
How does the AL Storz Coupling-Long Shank compare with the BR Storz Coupling-Long Shank?▾
Where is the AL Storz Coupling-Long Shank made?▾
Is the AL Storz Coupling-Long Shank in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Storz-Kupplung Schlauchtülle
- fr
- raccord Storz douille cannelée
- es
- acoplamiento Storz espiga portamanguera
- it
- raccordo Storz portagomma
From the blog
Written about this part
Industrial hose
Storz coupling sizes: lug distance, gaskets and the parts that make a connection
A Storz coupling has no male or female, and its size is the distance between the lugs, not the bore. How to identify one, which gasket goes in it, and what the fire-connection versions add.
5 min read
Industrial hose
Industrial hose couplings: how to identify and choose every common family
Cam and groove, Storz, Bauer, Guillemin, GOST, claw, ground joint, EN 14420, KC and flanges. How to tell them apart in thirty seconds, which duty each one suits, and how the coupling sets the rating.
7 min read








