Snatch Block with Loose Hook — G-161 Pattern, 700 lbs WLL
Category image · Lifting & RiggingSnatch Block with Loose Hook (G-161), in 1 size, 5″, WLL 700 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Snatch Block with Loose Hook
- Pattern / standard: G-161
- Size range: 5″
- Working load limit: 700 lbs
- Size range
- 5″
- Working load limit
- 700 lbs
- Material
- Steel
- Finish
- Galvanized or painted
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull. This range follows the G-161 pattern, sized to interchange in an existing rigging plan. Steel, galvanized or painted.
Sizes and ratings
1 size, 5″. Working load limit 700 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Snatch Block with Loose Hook |
| Pattern / standard | G-161 |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 700 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Steel |
| Finish | Galvanized or painted |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
1 sizeReplaces the Crosby G-161 series. Quote the Indus part number, or send us the Crosby number and we will cross it.
- Indus part no.IH-LR-BP-SBLHOOKG1-500
- Size
- 5″
- Rope size
- 5/8″
- WLL (lbs)
- 700
- Weight (kg)
- 0.8
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
Indus Hydraulics is not affiliated with Crosby. Crosby part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
What is the Snatch Block with Loose Hook — G-161 Pattern and what is it used for?▾
What sizes does the Snatch Block with Loose Hook — G-161 Pattern come in?▾
How do I size the Snatch Block with Loose Hook — G-161 Pattern for a job?▾
What is the working load limit of the Snatch Block with Loose Hook — G-161 Pattern?▾
How do I order a specific size of the Snatch Block with Loose Hook — G-161 Pattern?▾
Is the Snatch Block with Loose Hook — G-161 Pattern equivalent to the Crosby G-161 pattern?▾
What is the Snatch Block with Loose Hook — G-161 Pattern made of?▾
What standard and certificate come with the Snatch Block with Loose Hook — G-161 Pattern?▾
What can the Snatch Block with Loose Hook — G-161 Pattern be connected to?▾
How do I inspect the Snatch Block with Loose Hook — G-161 Pattern before use?▾
What are the typical applications of the Snatch Block with Loose Hook — G-161 Pattern?▾
Can I buy the Snatch Block with Loose Hook — G-161 Pattern from Indus ex-stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read







