Swivel Eye Block
Swivel Eye Block, in 5 sizes, WLL 420 to 1,250 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Swivel Eye Block
- Working load limit: 420 to 1,250 lbs
- Working load limit
- 420 to 1,250 lbs
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull.
Sizes and ratings
5 sizes. Working load limit 420 to 1,250 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Swivel Eye Block |
| Sizes | 5 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 420 to 1,250 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
5 sizes| Indus part no. | Size | Rope size | WLL (lbs) | A (mm) | B (mm) | L (mm) | Ø (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-BP-SEB-1 | 1½″ | 3/16″ | 420 | 41 | 25.5 | 101 | 38 | 0.2 |
| IH-LR-BP-SEB-200 | 2″ | 3/16″ | 480 | 54 | 25.5 | 115 | 50 | 0.68 |
| IH-LR-BP-SEB-2 | 2½″ | 1/4″ | 550 | 66.5 | 26.5 | 128 | 63.5 | 0.7 |
| IH-LR-BP-SEB-300 | 3″ | 1/4″ | 650 | 79 | 28.5 | 155 | 75 | 1 |
| IH-LR-BP-SEB-3 | 3½″ | 5/16″ | 1,250 | 92 | 3.5 | 172 | 89 | 1.4 |
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ø — Dimension Ø on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the swivel eye block come in?▾
What is the working load limit?▾
Can a snatch block be used for lifting?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Swivel Eye Flat Block
Swivel Eye Flat Double Sheave Block
Single Pulley Block with Eye — Type K
Stainless Steel Swivel Eye Pulley Single Wheel
Swivel Eye Snatch Block
Swivel Eye Scissor Double Hook Pulley
Swivel Eye Single Hook Block
