SMC Lubricator

SMC Lubricator, 30 mm to 60: 135 part numbers.
Product description
SMC Lubricator, 30 mm to 60: 135 part numbers.
Specification
- Type: Lubricator
- Size range: 30 mm to 60
- Thread Type: Metric Thread (M5)/RC
- Part numbers: 135
Sizes and part numbers
The Sizes & Part Numbers tab lists every SMC part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing air preparation
Size filters, regulators and lubricators on port size and the air flow the downstream tools and cylinders need, not on line size alone; an undersized unit drops pressure at full flow. Quote the maker part number and we will confirm bowl, drain and gauge options before supply.
How to order
Quote the SMC part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Semi-standard A | Polycarbonate Bowl |
| Semi-standard B | Flow Direction: Left to Right Name Plate and Caution Plate For Bowl in Imperial Units: Mpa |
| Thread Type | Metric Thread (M5)/RC |
Shipping & lead time
Sizes & part numbers
135 sizes- SMC part no.AL40-03
- Description
- Lubricator, 3/8 Inch Size, Standard, Port
- Ports
- 0.375
- SMC part no.AL40-04-3
- Description
- Lubricator, 1/2 Inch Port Size
- Ports
- 0.5
- SMC part no.AL20-N02B-CZ
- Description
- Lubricator, 1/4 Inch Size, N Port
- Ports
- 0.25
- SMC part no.AL60-N10-1Z
- Description
- Lubricator, 1 Inch N Port Size
- Ports
- —
- SMC part no.AL60-N10-3RZ
- Description
- Lubricator, 1 Inch N Port Size
- Ports
- —
- SMC part no.AL20-F02-C-X64
- Description
- Lubricator, 1/4 Inch Size, Port
- Ports
- —
- SMC part no.AL40-N03-1Z
- Description
- Lubricator, 3/8 Inch Size, Standard, N Port
- Ports
- 0.375
- SMC part no.AL30-N02B-3Z
- Description
- Lubricator, 1/4 Inch Size, N Port
- Ports
- 0.25
Show all 135 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
What is the SMC Lubricator used for?▾
Which part numbers are in the SMC Lubricator range and how do they differ?▾
What port sizes and flow ratings does the SMC Lubricator come in?▾
How do I choose the right SMC Lubricator part number?▾
What is the maximum working pressure of the SMC Lubricator?▾
What type of lubrication does the SMC Lubricator give, and which oil does it use?▾
What bowl and sight feed does the SMC Lubricator have?▾
What should I fit before the SMC Lubricator in an air line?▾
How do I fill, adjust and maintain the SMC Lubricator?▾
What is the difference between the SMC Lubricator and the SMC AL Series Lubricator?▾
Where is the SMC Lubricator made and how is it shipped from Dubai?▾
Can I buy the SMC Lubricator ex-stock from Indus in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
FRL units explained: filter, regulator and lubricator — order, grades, drains, bowls and sizing
An FRL is the last thing compressed air passes through before it reaches a valve or cylinder. What each element does and why the order is filter, regulator, lubricator; particulate vs coalescing grades in microns; manual, semi-automatic and automatic drains; relieving regulators; when to lubricate; polycarbonate vs metal bowls; and sizing by flow, not port size.
17 min read
Pneumatics & compressed air
Compressed air quality and ISO 8573-1: purity classes, pressure dew point and where to fix the water
ISO 8573-1 writes air quality as three numbers — particles, water, oil. What [2:4:2] or [7:4:3] actually means, which classes food, paint, tools and valves are commonly specified at, why hot, humid air drops so much water once it is compressed and cooled, and why drains, coalescing filters and dryers — not the FRL at the machine — are where water is removed.
14 min read
Pneumatics & compressed air
How to size a pneumatic cylinder: force, load ratio, pressure at the port and air consumption
Theoretical force is pressure times piston area, and the return stroke only gets the annulus. How much margin Parker recommends, why to size on the pressure at the cylinder rather than the compressor, how to work out air per cycle in free air, a worked example in bar/mm and psi/inch, and force tables for common bores at 6 bar and 80 psi.
22 min read







