Ratchet Strap — 2″ (50 mm)
Ratchet Strap (EN 12195-2), in 9 sizes, 2″, WLL 3,333 lbs. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Ratchet Strap
- Pattern / standard: EN 12195-2
- Size range: 2″
- Working load limit: 3,333 lbs
- Size range
- 2″
- Working load limit
- 3,333 lbs
- Material
- 100% high tensile polyester
Product description
Ratchet straps and tie-downs for securing loads in transport — load-securing equipment, not lifting gear. Made to EN 12195-2. 100% high tensile polyester.
Sizes and ratings
9 sizes, 2″. Working load limit 3,333 lbs. Minimum breaking load 5,000 kg. Available as: endless, standard, double j hook, flat hook, flat snap hook, grab hook, chain extension, D ring, twisted snap hook. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on the lashing capacity or working load limit on the label, use enough straps for the load, and protect the webbing from edges.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Ratchet Strap |
| Pattern / standard | EN 12195-2 |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 3,333 lbs |
| Minimum breaking load | 5,000 kg |
Construction
| Parameter | Value |
|---|---|
| Material | 100% high tensile polyester |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | Type | WLL (lbs) | Min breaking load (kg) | Min breaking load (lbs) | Length | Ratchet / fitting |
|---|---|---|---|---|---|---|---|
| IH-LR-RS-RS250M-200-E | 2″ | Endless | 3,330 | — | — | — | — |
| IH-LR-RS-RS250M-200-S | 2″ | Standard | — | — | — | — | — |
| IH-LR-RS-RS250M-200-DJH | 2″ | Double j hook | — | — | — | 27-30 ft | AL handle/Plastic handle/Double J Hook |
| IH-LR-RS-RS250M-200-FH | 2″ | Flat hook | — | — | — | — | AL handle/Flat hook |
| IH-LR-RS-RS250M-200-FSH | 2″ | Flat snap hook | — | 5,000 | — | — | — |
| IH-LR-RS-RS250M-200-GH | 2″ | Grab hook | 3,330 | — | 10,000 | — | AL Handle/Grab Hook |
| IH-LR-RS-RS250M-200-CE | 2″ | Chain extension | — | — | 10,000 | — | Al Handle/Chain Extention |
| IH-LR-RS-RS250M-200-DR | 2″ | D ring | — | 5,000 | — | 4-12m | AL Handle/D Ring |
| IH-LR-RS-RS250M-200-TSH | 2″ | Twisted snap hook | — | — | — | — | Short Standard Handle Ratchet |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Length — Length as published. Ratchet / fitting — Ratchet handle and end fitting, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the ratchet strap come in?▾
What is the working load limit?▾
How many ratchet straps do I need?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
