Plated Iron Ground Joint NPT Male Stem

Plated Iron Ground Joint NPT Male Stem — plated iron ground joint stem with a male NPT thread. Sizes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4". Plated Iron. Supplied by Sealfast (USA); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Ground Joint Coupling
- Coupling Type / Variant: Ground Joint — Ground Joint NPT Male Stem
- End A Configuration: Male NPT thread
- End B Configuration: Ground seat, mating with a spud
- Size Range: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
- Coupling Family
- Ground Joint Coupling
- Coupling Type / Variant
- Ground Joint — Ground Joint NPT Male Stem
- End A Configuration
- Male NPT thread
- End B Configuration
- Ground seat, mating with a spud
- Size Range
- 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
Product description
The Plated Iron Ground Joint NPT Male Stem is a Ground Joint Coupling from the Sealfast (USA) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Ground Joint Coupling
- Coupling type: Ground Joint — Ground Joint NPT Male Stem
- End A: Male NPT thread
- End B: Ground seat, mating with a spud
Specifications
- Size range: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
- Material: Plated Iron
- Working pressure: Not published by Sealfast. Give us your working pressure and medium and we will check it with the manufacturer.
- Seal: Metal-to-metal ground seat, no gasket
- Standard: NPT pipe thread (ASME B1.20.1)
About the family
A ground joint coupling seals metal to metal: a hose stem with a ground seat is drawn against a matching spud by a wing nut, with no gasket in the joint. That is why it is used on steam, where rubber seals harden and fail. Sealfast's plated-iron range covers hose stems, NPT male stems, wing nuts, male, female and double spuds and complete sets from 1/2" to 4", with zinc-plated iron clamps to hold the hose on the stem.
Selection and service notes
Keep the seats clean and undamaged, because a scratched seat leaks. Clamp the hose to the stem with a clamp sized to the hose outside diameter and re-tighten after the first heat cycle. Sealfast publishes no pressure rating for these parts, so confirm one for your steam pressure before ordering.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Ground joint steam couplings.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table.
| Size | Plated Iron |
|---|---|
| 1/2" | SFGJ050MS |
| 3/4" | SFGJ075MS |
| 1" | SFGJ100MS |
| 1-1/4" | SFGJ125MS |
| 1-1/2" | SFGJ150MS |
| 2" | SFGJ200MS |
| 2-1/2" | SFGJ250MS |
| 3" | SFGJ300MS |
| 4" | SFGJ400MS |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Ground Joint Coupling |
| Coupling Type / Variant | Ground Joint — Ground Joint NPT Male Stem |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Male NPT thread |
| End B Configuration | Ground seat, mating with a spud |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Plated Iron |
| Seal / Gasket | Metal-to-metal ground seat, no gasket |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | NPT pipe thread (ASME B1.20.1) |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-050
- Nominal size
- 1/2"
- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-075
- Nominal size
- 3/4"
- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-100
- Nominal size
- 1"
- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-125
- Nominal size
- 1-1/4"
- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-150
- Nominal size
- 1-1/2"
- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-200
- Nominal size
- 2"
- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-250
- Nominal size
- 2-1/2"
- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-300
- Nominal size
- 3"
Show all 9 sizesShow fewer sizes
- Indus part no.IH-GJ-GROUND-JOINT-NPT-MALE-STEM-400
- Nominal size
- 4"
What is the plated iron ground joint NPT male stem used for?▾
What sizes and part numbers are listed for the plated iron ground joint NPT male stem?▾
How do I choose the right size or model of the plated iron ground joint NPT male stem?▾
What pressure rating does the plated iron ground joint NPT male stem have?▾
Which materials is the plated iron ground joint NPT male stem offered in?▾
Which standards and documents apply to the plated iron ground joint NPT male stem?▾
What does the plated iron ground joint NPT male stem connect to?▾
How do I fit and look after the plated iron ground joint NPT male stem?▾
Where is the plated iron ground joint NPT male stem used?▾
How does the plated iron ground joint NPT male stem differ from the plated iron ground joint hose stem?▾
What country of origin and HS code apply to the plated iron ground joint NPT male stem?▾
Can I buy the plated iron ground joint NPT male stem from stock in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Industrial hose
Ground joint steam couplings: the metal seat that has no gasket to fail
A steam hose connection has to survive 170 °C and more without a rubber seal. How a ground joint coupling seals metal to metal, the parts that make one, and the clamps that hold it to the hose.
5 min read
Industrial hose
Industrial hose couplings: how to identify and choose every common family
Cam and groove, Storz, Bauer, Guillemin, GOST, claw, ground joint, EN 14420, KC and flanges. How to tell them apart in thirty seconds, which duty each one suits, and how the coupling sets the rating.
7 min read







