Plated Iron Ground Joint Complete Set

Plated Iron Ground Joint Complete Set — plated iron ground joint complete set: stem, wing nut and spud. Sizes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4". Plated Iron. Supplied by Sealfast (USA); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Ground Joint Coupling
- Coupling Type / Variant: Ground Joint — Ground Joint Complete Set
- End A Configuration: Hose stem
- End B Configuration: Spud
- Size Range: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
- Coupling Family
- Ground Joint Coupling
- Coupling Type / Variant
- Ground Joint — Ground Joint Complete Set
- End A Configuration
- Hose stem
- End B Configuration
- Spud
- Size Range
- 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
Product description
The Plated Iron Ground Joint Complete Set is a Ground Joint Coupling from the Sealfast (USA) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Ground Joint Coupling
- Coupling type: Ground Joint — Ground Joint Complete Set
- End A: Hose stem
- End B: Spud
Specifications
- Size range: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
- Material: Plated Iron
- Working pressure: Not published by Sealfast. Give us your working pressure and medium and we will check it with the manufacturer.
- Seal: Metal-to-metal ground seat, no gasket
About the family
A ground joint coupling seals metal to metal: a hose stem with a ground seat is drawn against a matching spud by a wing nut, with no gasket in the joint. That is why it is used on steam, where rubber seals harden and fail. Sealfast's plated-iron range covers hose stems, NPT male stems, wing nuts, male, female and double spuds and complete sets from 1/2" to 4", with zinc-plated iron clamps to hold the hose on the stem.
Selection and service notes
Keep the seats clean and undamaged, because a scratched seat leaks. Clamp the hose to the stem with a clamp sized to the hose outside diameter and re-tighten after the first heat cycle. Sealfast publishes no pressure rating for these parts, so confirm one for your steam pressure before ordering.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Ground joint steam couplings.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table.
| Size | Plated Iron |
|---|---|
| 1/2" | SFGJ050 |
| 3/4" | SFGJ075 |
| 1" | SFGJ100 |
| 1-1/4" | SFGJ125 |
| 1-1/2" | SFGJ150 |
| 2" | SFGJ200 |
| 2-1/2" | SFGJ250 |
| 3" | SFGJ300 |
| 4" | SFGJ400 |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Ground Joint Coupling |
| Coupling Type / Variant | Ground Joint — Ground Joint Complete Set |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Hose stem |
| End B Configuration | Spud |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Plated Iron |
| Seal / Gasket | Metal-to-metal ground seat, no gasket |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-050
- Nominal size
- 1/2"
- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-075
- Nominal size
- 3/4"
- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-100
- Nominal size
- 1"
- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-125
- Nominal size
- 1-1/4"
- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-150
- Nominal size
- 1-1/2"
- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-200
- Nominal size
- 2"
- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-250
- Nominal size
- 2-1/2"
- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-300
- Nominal size
- 3"
Show all 9 sizesShow fewer sizes
- Indus part no.IH-GJ-GROUND-JOINT-COMPLETE-SET-400
- Nominal size
- 4"
What is the plated iron ground joint complete set used for?▾
What sizes and part numbers are listed for the plated iron ground joint complete set?▾
How should I select the plated iron ground joint complete set for my application?▾
What pressure rating does the plated iron ground joint complete set have?▾
What is the plated iron ground joint complete set made from?▾
Which standards apply to the plated iron ground joint complete set?▾
What does the plated iron ground joint complete set connect to?▾
How do I fit and look after the plated iron ground joint complete set?▾
Which industries and jobs use the plated iron ground joint complete set?▾
How does the plated iron ground joint complete set differ from the plated iron ground joint wing nut?▾
What country of origin and HS code apply to the plated iron ground joint complete set?▾
Is the plated iron ground joint complete set available from stock in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Industrial hose
Ground joint steam couplings: the metal seat that has no gasket to fail
A steam hose connection has to survive 170 °C and more without a rubber seal. How a ground joint coupling seals metal to metal, the parts that make one, and the clamps that hold it to the hose.
5 min read
Industrial hose
Industrial hose couplings: how to identify and choose every common family
Cam and groove, Storz, Bauer, Guillemin, GOST, claw, ground joint, EN 14420, KC and flanges. How to tell them apart in thirty seconds, which duty each one suits, and how the coupling sets the rating.
7 min read








