Plated Iron Ground Joint Wing Nut

Plated Iron Ground Joint Wing Nut — plated iron ground joint wing nut, drawing the stem onto the spud. Sizes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4". Plated Iron. Supplied by Sealfast (USA); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Ground Joint Coupling
- Coupling Type / Variant: Ground Joint — Ground Joint Wing Nut
- Size Range: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
- Coupling Family
- Ground Joint Coupling
- Coupling Type / Variant
- Ground Joint — Ground Joint Wing Nut
- Size Range
- 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
Product description
The Plated Iron Ground Joint Wing Nut is a Ground Joint Coupling from the Sealfast (USA) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: Ground Joint Coupling
- Coupling type: Ground Joint — Ground Joint Wing Nut
Specifications
- Size range: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4"
- Material: Plated Iron
- Working pressure: Not published by Sealfast. Give us your working pressure and medium and we will check it with the manufacturer.
- Seal: Metal-to-metal ground seat, no gasket
About the family
A ground joint coupling seals metal to metal: a hose stem with a ground seat is drawn against a matching spud by a wing nut, with no gasket in the joint. That is why it is used on steam, where rubber seals harden and fail. Sealfast's plated-iron range covers hose stems, NPT male stems, wing nuts, male, female and double spuds and complete sets from 1/2" to 4", with zinc-plated iron clamps to hold the hose on the stem.
Selection and service notes
Keep the seats clean and undamaged, because a scratched seat leaks. Clamp the hose to the stem with a clamp sized to the hose outside diameter and re-tighten after the first heat cycle. Sealfast publishes no pressure rating for these parts, so confirm one for your steam pressure before ordering.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: Ground joint steam couplings.
Sealfast part numbers
Order by the Sealfast part number for the material you need, or by the Indus part number in the size table.
| Size | Plated Iron |
|---|---|
| 1/2" | SFGJ050N |
| 3/4" | SFGJ075N |
| 1" | SFGJ100N |
| 1-1/4" | SFGJ125N |
| 1-1/2" | SFGJ150N |
| 2" | SFGJ200N |
| 2-1/2" | SFGJ250N |
| 3" | SFGJ300N |
| 4" | SFGJ400N |
Part numbers from Seal Fast, Inc.’s catalogue at products.sealfast.com, checked 6 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Ground Joint Coupling |
| Coupling Type / Variant | Ground Joint — Ground Joint Wing Nut |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and 4" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Plated Iron |
| Seal / Gasket | Metal-to-metal ground seat, no gasket |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-050
- Nominal size
- 1/2"
- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-075
- Nominal size
- 3/4"
- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-100
- Nominal size
- 1"
- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-125
- Nominal size
- 1-1/4"
- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-150
- Nominal size
- 1-1/2"
- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-200
- Nominal size
- 2"
- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-250
- Nominal size
- 2-1/2"
- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-300
- Nominal size
- 3"
Show all 9 sizesShow fewer sizes
- Indus part no.IH-GJ-GROUND-JOINT-WING-NUT-400
- Nominal size
- 4"
Where and how is the plated iron ground joint wing nut used?▾
Which sizes is the plated iron ground joint wing nut available in?▾
How do I choose the right size or model of the plated iron ground joint wing nut?▾
What working pressure applies to the plated iron ground joint wing nut?▾
Which materials is the plated iron ground joint wing nut offered in?▾
Which standards apply to the plated iron ground joint wing nut?▾
What does the plated iron ground joint wing nut connect to?▾
How should the plated iron ground joint wing nut be installed and maintained?▾
Where is the plated iron ground joint wing nut used?▾
How does the plated iron ground joint wing nut differ from the plated iron ground joint complete set?▾
Where are the plated iron ground joint wing nut shipped from, and what origin and HS code apply?▾
Is the plated iron ground joint wing nut available from stock in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Flügelmutter
- fr
- écrou à oreilles
- es
- tuerca de mariposa
- it
- dado ad alette
From the blog







