Parker 16L Compact General Industrial Lubricators, Micro-Mist

Parker 16L Compact General Industrial Lubricators, Micro-Mist: 10 part numbers.
Product description
Parker 16L Compact General Industrial Lubricators, Micro-Mist: 10 part numbers.
Specification
- Pressure stated by the maker: 175 to 250 psi (12 to 17 bar), by size
- Part numbers: 10
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing air preparation
Size filters, regulators and lubricators on port size and the air flow the downstream tools and cylinders need, not on line size alone; an undersized unit drops pressure at full flow. Quote the maker part number and we will confirm bowl, drain and gauge options before supply.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Air Preparation Product Type | Lubricator Micro Mist |
| Air Preparation Series | General Industrial Series |
| Bowl Type | Poly With Bowl Guard |
| Filter Drain Type | None |
| Series | 16L COMPACT Series |
Shipping & lead time
Sizes & part numbers
10 sizes- Parker Hannifin part no.16L12BE
- Description
- Lubricator, Micro Mist, 1/4 Inch NPT, 90 scfm, 250 psig Max Op Pressure
- Max pressure (psi)
- —
- Ports
- 1/4"
- Parker Hannifin part no.16L14BE
- Description
- Air Line Lubricator 1/4 Inch
- Max pressure (psi)
- 250
- Ports
- 1/4"
- Parker Hannifin part no.16L24BE
- Description
- Air Line Lubricator 3/8 Inch
- Max pressure (psi)
- 250
- Ports
- 3/8"
- Parker Hannifin part no.16L34BE
- Description
- Air Line Lubricator 1/2 Inch
- Max pressure (psi)
- 250
- Ports
- 1/2"
- Parker Hannifin part no.17L34BE
- Description
- Air Line Lubricator, 1/2 Inch, 90 PCM, Polycarbonate
- Max pressure (psi)
- 250
- Ports
- 1/2"
- Parker Hannifin part no.17L44BE
- Description
- Air Line Lubricator 3/4 Inch
- Max pressure (psi)
- 250
- Ports
- 3/4"
- Parker Hannifin part no.17L32BE
- Description
- Lubricator, Mist, 1/2 Inch NPT, 90 scfm, 175 psig Max Op Pressure, 175 deg.F Max Op Temp
- Max pressure (psi)
- 175
- Ports
- 1/2"
- Parker Hannifin part no.16L32BE
- Description
- Lubricator, Micro Mist, 1/2 Inch NPT, 90 scfm, 250 psig Max Op Pressure
- Max pressure (psi)
- 250
- Ports
- 1/2"
Show all 10 sizesShow fewer sizes
- Parker Hannifin part no.16L22BE
- Description
- Lubricator, Micro Mist, 3/8 Inch NPT, 90 scfm, 250 psig Max Op Pressure
- Max pressure (psi)
- 250
- Ports
- 3/8"
- Parker Hannifin part no.17L42BE
- Description
- Lubricator, Micro Mist, 3/4 Inch NPT, 90 scfm, 250 psig Max Op Pressure
- Max pressure (psi)
- 250
- Ports
- 3/4"
Description — What this part number is, as the manufacturer lists it. Max pressure — Maximum (intermittent) pressure, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
Pressure, flow, speed, torque and load figures are the manufacturer’s published ratings for that part number. A circuit is limited by its lowest-rated component, so check them against the hose, fittings and valves it connects to.
What is the Parker 16L Compact micro-mist lubricator used for?▾
How do you read a Parker 16L part number such as 16L24BE?▾
Which sizes are in the Parker 16L micro-mist lubricator listing?▾
What is the maximum pressure of the Parker 16L micro-mist lubricator?▾
Which oil should be used in a Parker 16L micro-mist lubricator?▾
Does the Parker 16L lubricator come with test or conformity documents?▾
Which filter/regulator pairs with a Parker 16L micro-mist lubricator?▾
How do you set the oil feed on a Parker 16L micro-mist lubricator?▾
When is a Parker 16L micro-mist lubricator the right choice?▾
What is the difference between Parker 16L micro-mist and 06L mist lubricators?▾
Where are Parker 16L micro-mist lubricators made and shipped from?▾
Can Parker 16L micro-mist lubricators be supplied ex-stock from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
FRL units explained: filter, regulator and lubricator — order, grades, drains, bowls and sizing
An FRL is the last thing compressed air passes through before it reaches a valve or cylinder. What each element does and why the order is filter, regulator, lubricator; particulate vs coalescing grades in microns; manual, semi-automatic and automatic drains; relieving regulators; when to lubricate; polycarbonate vs metal bowls; and sizing by flow, not port size.
17 min read
Pneumatics & compressed air
Compressed air quality and ISO 8573-1: purity classes, pressure dew point and where to fix the water
ISO 8573-1 writes air quality as three numbers — particles, water, oil. What [2:4:2] or [7:4:3] actually means, which classes food, paint, tools and valves are commonly specified at, why hot, humid air drops so much water once it is compressed and cooled, and why drains, coalescing filters and dryers — not the FRL at the machine — are where water is removed.
14 min read
Pneumatics & compressed air
How to size a pneumatic cylinder: force, load ratio, pressure at the port and air consumption
Theoretical force is pressure times piston area, and the return stroke only gets the annulus. How much margin Parker recommends, why to size on the pressure at the cylinder rather than the compressor, how to work out air per cycle in free air, a worked example in bar/mm and psi/inch, and force tables for common bores at 6 bar and 80 psi.
22 min read





