Oteco Model 72 Gate Valve, 4 in, 2,000 to 5,000 psi

Oteco Model 72 4-inch rising-stem gate valves: GV424, GV436, GV450 for 2,000, 3,000 and 5,000 psi, in standard, sour gas and waterflood trim, with threaded, butt-weld, union and API flanged ends — 64 part numbers. Authorised Oteco distributor, stock in the UAE.
Key features
- Valve Type: Gate valve, rising stem (mud and manifold service)
- Nominal Size: 4 in
- Working Pressure: 2,000, 3,000 and 5,000 psi
- End Connection (Inlet): Line pipe thread, EUE / NUE / casing thread, butt weld Sch. 80 / 160 / XXS, Fig. 602 / 1002 / 1502 union, API and ASME flanges
- Service Class: Standard, sour gas (H2S), waterflood (stainless trim)
- Valve type
- Gate valve, rising stem (mud and manifold service)
- Nominal size
- 4 in
- Working pressure
- 2,000, 3,000 and 5,000 psi
- Service
- Standard, sour gas (H2S), waterflood (stainless trim)
Product description
The Oteco Model 72 is a rising-stem gate valve built in Houston for drilling mud systems, standpipe and rig-floor manifolds, flowlines, waterflood injection, crude oil and sour gas service. This listing covers the 4-inch valves — GV424, GV436, GV450 for 2,000, 3,000 and 5,000 psi working pressure — in 64 part numbers that combine the model with its trim and end connections. The valves are rated from −20 °F to 250 °F (−29 °C to 121 °C). Oteco states that Model 72 parts interchange with Cameron Type 'S' Flex-Seal valve parts.
How the valve is built
- Body subs. The end connections screw into the body, so a valve changes from line pipe thread to butt weld, union or flange by changing the subs, not the body.
- One-piece forged gate and stem. The stem rises with the gate, so the valve shows open, part-open or closed at a glance.
- Low operating torque. Large ball bearings and heavy stem threads keep the handwheel load down at full pressure.
- Gate packing and wear plates. Interlocking packings and wear plates seal the gate and protect the body and cap. Bonded packings, with the wear plates moulded in, are an option.
- Field renewal. Minor and major repair kits rebuild the valve in line; see Model 72 repair kits, body subs and spare parts.
Trims
Standard service uses a 4130 gate, electroless nickel plated, with nitrile packings. Sour gas (H2S) valves use stainless gates, wear plates and stem packing rings with low-temperature nitrile packings. Waterflood valves (ST, stainless trim) are built for corrosive injection water.
Working pressure and end connections
Each model is rated at its class working pressure. The end connection decides the shell test pressure, and a threaded end can limit the valve below its body rating:
Shell test pressure, psi, by end connection (Oteco Model 72 brochure)
| End connection | GV424 (2,000 psi) | GV436 (3,000 psi) | GV450 (5,000 psi) |
|---|---|---|---|
| Line pipe thread | 4,000 | 6,000 | 7,500 |
| Butt weld, Sch. 80 | 4,000 | 4,500 | not recommended |
| Butt weld, Sch. 160 | 4,000 | 6,000 | 7,500 |
| Butt weld, Sch. XXS | 4,000 | 6,000 | 10,000 |
| ASME raised-face flange | 4,000 | 6,000 | 10,000 |
| API ring-joint flange | 4,000 | 6,000 | 10,000 |
| Fig. 1002 union | 4,000 | 6,000 | 10,000 |
| Fig. 1502 union | 4,000 | 6,000 | 10,000 |
Hammer-union subs are made to mate with FMC Weco Figure 602, 1002 and 1502 unions. Oteco warns against connecting them to unions of other makes unless those are confirmed compatible (Oteco Engineering Bulletin EB-004).
Dimensions
Line pipe threaded valves, inches
| Model | A | B (end to end) | D (bore) | E | F | G | H |
|---|---|---|---|---|---|---|---|
| GV424 | 5.50 | 11.00 | 4.06 | 3.88 | 23.88 | 20.00 | 10.63 |
| GV436 / GV450 | 6.50 | 13.00 | 4.06 | 4.25 | 25.25 | 22.00 | 11.38 |
API ring-joint flanged valves, inches
| Model | Flange | A | B (end to end) | C |
|---|---|---|---|---|
| GV424 | 4-1/16" 2,000 psi | 8.56 | 17.13 | 10.75 |
| GV436 | 4-1/16" 3,000 psi | 8.19 | 16.38 | 11.50 |
| GV450 | 4-1/16" 5,000 psi | 9.00 | 18.00 | 12.25 |
Letters refer to Oteco's dimension drawing; B is the end-to-end length and D the bore. Butt-weld and union valves have their own lengths — we send the drawing with the quotation.
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Valve type | Gate valve, rising stem (mud and manifold service) |
| Manufacturer models | GV424, GV436, GV450 |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Nominal size | 4 in |
| Bore | 4-1/16 in |
| End connections | Line pipe thread, EUE / NUE / casing thread, butt weld Sch. 80 / 160 / XXS, Fig. 602 / 1002 / 1502 union, API and ASME flanges |
Performance
| Parameter | Value |
|---|---|
| Working pressure | 2,000, 3,000 and 5,000 psi |
| Temperature range | −20 °F to 250 °F (−29 °C to 121 °C) |
| Service | Standard, sour gas (H2S), waterflood (stainless trim) |
Construction
| Parameter | Value |
|---|---|
| Gate | 4130 electroless nickel plated (standard); stainless (sour gas, waterflood) |
| Packings | Nitrile (NBR); low-temperature nitrile for sour gas; bonded packing option |
Compatibility
| Parameter | Value |
|---|---|
| Interchangeability | Parts interchange with Cameron Type S Flex-Seal (Oteco) |
Shipping & lead time
Sizes & part numbers
64 sizes- Indus part no.IH-OTC-110006
- Model
- GV424
- Size
- 4"
- Class
- 2,000 psi
- End connections
- 4" line pipe thread
- Service
- Waterflood (stainless trim)
- Indus part no.IH-OTC-110007
- Model
- GV436
- Size
- 4"
- Class
- 3,000 psi
- End connections
- 4" line pipe thread
- Service
- Waterflood (stainless trim)
- Indus part no.IH-OTC-110008
- Model
- GV450
- Size
- 4"
- Class
- 5,000 psi
- End connections
- 4" line pipe thread
- Service
- Waterflood (stainless trim)
- Indus part no.IH-OTC-110016
- Model
- GV450
- Size
- 4"
- Class
- 5,000 psi
- End connections
- 4-1/2" NUE tubing thread
- Service
- Standard
- Indus part no.IH-OTC-110021
- Model
- GV424
- Size
- 4"
- Class
- 2,000 psi
- End connections
- 4-1/2" long casing thread (LCSG) (bonded gate packing)
- Service
- Waterflood (stainless trim)
- Indus part no.IH-OTC-110022
- Model
- GV436
- Size
- 4"
- Class
- 3,000 psi
- End connections
- 4-1/2" long casing thread (LCSG)
- Service
- Waterflood (stainless trim)
- Indus part no.IH-OTC-110023
- Model
- GV436
- Size
- 4"
- Class
- 3,000 psi
- End connections
- 4-1/2" long casing thread (LCSG)
- Service
- Standard
- Indus part no.IH-OTC-110030
- Model
- GV424
- Size
- 4"
- Class
- 2,000 psi
- End connections
- 4" butt weld, Sch. 80
- Service
- Waterflood (stainless trim)
Show all 64 sizesShow fewer sizes
Model — Manufacturer model code, where one listing covers several models. Size — Nominal pipe size (NPS), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is the Oteco Model 72 4-inch gate valve (GV424, GV436, GV450) used for?▾
How do I read the Oteco GV424, GV436 and GV450 model codes and part numbers?▾
Do Oteco Model 72 4-inch gate valve parts interchange with Cameron Type 'S' Flex-Seal valves?▾
Which should I choose, Oteco GV424, GV436 or GV450?▾
What end connections can I get on the Oteco Model 72 4-inch gate valve?▾
What temperature and shell test pressures apply to the Oteco GV450 gate valve?▾
What trim does the Oteco Model 72 4-inch valve use for sour gas (H2S) or waterflood service?▾
What approvals does Oteco state for the Model 72 4-inch gate valve?▾
Which repair kits and spares fit the Oteco GV424, GV436 and GV450 valves?▾
How is the Oteco Model 72 4-inch gate valve serviced and its ends changed?▾
Where is the Oteco Model 72 4-inch gate valve made and who supplies it in the Middle East?▾
Is the Oteco Model 72 4-inch gate valve in stock in Dubai, and what do you need for a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read
Drilling rig equipment
Model 72 or DM: choosing an Oteco mud gate valve
Oteco makes two mud gate valves. The Model 72 is a rising-stem valve to 5,000 psi with body subs for its ends and a published Cameron Type ‘S’ parts interchange. The DM reaches 7,500 psi and rebuilds in line. How they differ, how to read their model numbers, and which one to specify.
5 min read
Drilling rig equipment
Rebuilding a Model 72 gate valve: minor and major kits, body subs and packing
An Oteco Model 72 is rebuilt in line with a minor kit (gate packings, wear plates, O-rings) or a major kit (the same plus the gate and stem packing). How to choose the kit by model, trim and packing style, when to change body subs, and what to send for the part numbers.
5 min read








