API 6A Expanding Gate Valve, 3-1/16" to 7-1/16", 2,000 to 5,000 psi

API 6A expanding gate valves: 3-1/16" to 7-1/16", 2,000 to 5,000 psi, non-rising stem, gate and segment seal mechanically on both seats, threaded or flanged, for oil and water service.
Key features
- Valve type: Gate valve, expanding, API 6A
- Construction: Gate and segment, non-rising stem
- Design standard: API 6A (21st edition)
- Size range: 3-1/16" to 7-1/16"
- Pressure class: 2,000 to 5,000 psi working pressure
- Body material: API 6A material classes AA to HH (DD to HH for sour service)
- End connections: API 6A flanged or threaded
- Operation: Handwheel; actuator on request
- Valve type
- Gate valve, expanding, API 6A
- Design standard
- API 6A (21st edition)
- Pressure class
- 2,000 to 5,000 psi working pressure
- End connections
- API 6A flanged or threaded
- Operation
- Handwheel; actuator on request
Product description
A wellhead and flowline gate valve that seals mechanically, with or without line pressure. At the end of its stroke the gate and segment wedge apart onto both seats, so it holds tight on low-pressure and depleted wells where a slab gate depends on pressure to seal.
API 6A sets the design, materials and testing of wellhead and christmas-tree equipment. Each piece is specified by its rated working pressure (2,000 to 20,000 psi), temperature class, material class (AA to HH, with DD to HH for sour service to NACE MR0175 / ISO 15156), product specification level (PSL 1 to 4) and performance requirement (PR1 or PR2).
Construction
- Gate and segment expand onto both seats at full travel
- Dual soft-insert seats for a tight seal (not for high-temperature service)
- Non-rising stem, sealant-injected packing, quick-release handwheel
- Guide plates reduce grease loss from the body cavity
Sizes and ratings
Published range: 3-1/16" to 7-1/16", 2,000 to 5,000 psi working pressure, in api 6a material classes aa to hh (dd to hh for sour service). End connections: API 6A flanged or threaded. Operation: handwheel; actuator on request.
Sizes and ratings are confirmed per order; the general arrangement drawing comes with the quotation.
Testing and documents
Hydrostatic body and seat tests to API 6A at the PSL ordered, with gas tests at PSL 3G and 4, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
API 6A expanding gate valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other oilfield gate valves in the range, for comparison when the duty is not settled yet: Mud Valve, Top Entry, 1-13/16" to 5-1/8", 2,000 to 10,000 psi, API 6A Slab Gate Valve, 1-13/16" to 11", 2,000 to 20,000 psi, API 6A Balanced-Stem Gate Valve, 10,000 to 25,000 psi.
Materials
| Parameter | Value |
|---|---|
| Body material | API 6A material classes AA to HH (DD to HH for sour service) |
| Seat and trim | PSL 1 to 4; PR1 or PR2 |
Range
| Parameter | Value |
|---|---|
| Temperature range | API 6A temperature classes K to V |
| Size range | 3-1/16" to 7-1/16" |
| Pressure class | 2,000 to 5,000 psi working pressure |
Identification
| Parameter | Value |
|---|---|
| Valve type | Gate valve, expanding, API 6A |
| Construction | Gate and segment, non-rising stem |
Standards
| Parameter | Value |
|---|---|
| Design standard | API 6A (21st edition) |
| Pressure testing | Hydrostatic body and seat tests to API 6A at the PSL ordered, with gas tests at PSL 3G and 4 |
Construction
| Parameter | Value |
|---|---|
| End connections | API 6A flanged or threaded |
| Operation | Handwheel; actuator on request |
Application
| Parameter | Value |
|---|---|
| Typical service | Water injection, oil wells and flowlines |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with API 6A documentation and the test record |
Shipping & lead time
What is an API 6A expanding gate valve used for?▾
What do PSL 1 to 4 and PR1 or PR2 mean on an API 6A expanding gate valve?▾
What sizes and pressure ratings does the API 6A expanding gate valve come in?▾
Should I choose an expanding gate valve or a slab gate valve for water injection?▾
How is the API 6A expanding gate valve tested?▾
Which material and temperature classes does the API 6A expanding gate valve offer?▾
Is the API 6A expanding gate valve to API specification, and what documents are supplied?▾
How is the API 6A expanding gate valve operated?▾
What temperature can the seats of an API 6A expanding gate valve take?▾
Expanding gate valve or slab gate valve: which one for low-pressure wells?▾
Can the API 6A expanding gate valve be supplied from Dubai with test records?▾
Do you stock the API 6A expanding gate valve in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Oilfield & pressure control
Reading an API 6A nameplate: pressure, material class, temperature class, PSL and PR
An API 6A valve or wellhead nameplate packs a specification into a line of codes: EE-1.5, P+U, PSL 3G, PR2. What each one means, how they show up on the valves we list, and what to send when replacing one.
7 min read
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read
Drilling rig equipment
Model 72 or DM: choosing an Oteco mud gate valve
Oteco makes two mud gate valves. The Model 72 is a rising-stem valve to 5,000 psi with body subs for its ends and a published Cameron Type ‘S’ parts interchange. The DM reaches 7,500 psi and rebuilds in line. How they differ, how to read their model numbers, and which one to specify.
5 min read








