API 6A Balanced-Stem Gate Valve, 10,000 to 25,000 psi

Balanced-stem (tail rod) gate valves to API 6A: 2-1/16" to 13", 10,000 to 25,000 psi, ball-screw drive for low handwheel torque at high pressure, metal-to-metal seals.
Key features
- Valve type: Gate valve, balanced stem, API 6A
- Construction: Slab gate with balancing tail rod, ball-screw drive
- Design standard: API 6A (21st edition)
- Size range: 2-1/16" to 13"
- Pressure class: 10,000 to 25,000 psi working pressure
- Body material: API 6A material classes AA to HH (DD to HH for sour service)
- End connections: API 6A flanged, studded or clamp hub
- Operation: Handwheel with ball-screw drive; actuator on request
- Valve type
- Gate valve, balanced stem, API 6A
- Design standard
- API 6A (21st edition)
- Pressure class
- 10,000 to 25,000 psi working pressure
- End connections
- API 6A flanged, studded or clamp hub
- Operation
- Handwheel with ball-screw drive; actuator on request
Product description
For large bores at very high pressure, where an ordinary gate valve would take too much force to turn. A tail rod below the gate balances the pressure load on the stem, and a ball-screw drive cuts the operating torque, so one person can operate a large high-pressure valve by hand.
API 6A sets the design, materials and testing of wellhead and christmas-tree equipment. Each piece is specified by its rated working pressure (2,000 to 20,000 psi), temperature class, material class (AA to HH, with DD to HH for sour service to NACE MR0175 / ISO 15156), product specification level (PSL 1 to 4) and performance requirement (PR1 or PR2).
Construction
- Balancing tail rod: line pressure acts equally up and down, so stem thrust is low
- Ball-screw drive and bearing housing for low operating torque
- Pressure-energised stem and tail-rod seals; self-energising metal bonnet seals
- Bonnet lubricators for emergency stem and cavity greasing; dual lip-seal seats
Sizes and ratings
Published range: 2-1/16" to 13", 10,000 to 25,000 psi working pressure, in api 6a material classes aa to hh (dd to hh for sour service). End connections: API 6A flanged, studded or clamp hub. Operation: handwheel with ball-screw drive; actuator on request.
Sizes and ratings are confirmed per order; the general arrangement drawing comes with the quotation.
Testing and documents
Hydrostatic body and seat tests to API 6A at the PSL ordered, with gas tests at PSL 3G and 4, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Balanced-stem gate valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other oilfield gate valves in the range, for comparison when the duty is not settled yet: API 6A Expanding Gate Valve, 3-1/16" to 7-1/16", 2,000 to 5,000 psi, Mud Valve, Top Entry, 1-13/16" to 5-1/8", 2,000 to 10,000 psi, API 6A Slab Gate Valve, 1-13/16" to 11", 2,000 to 20,000 psi.
Materials
| Parameter | Value |
|---|---|
| Body material | API 6A material classes AA to HH (DD to HH for sour service) |
| Seat and trim | PSL 1 to 4; PR1 or PR2 |
Range
| Parameter | Value |
|---|---|
| Temperature range | API 6A temperature classes K to V |
| Size range | 2-1/16" to 13" |
| Pressure class | 10,000 to 25,000 psi working pressure |
Identification
| Parameter | Value |
|---|---|
| Valve type | Gate valve, balanced stem, API 6A |
| Construction | Slab gate with balancing tail rod, ball-screw drive |
Standards
| Parameter | Value |
|---|---|
| Design standard | API 6A (21st edition) |
| Pressure testing | Hydrostatic body and seat tests to API 6A at the PSL ordered, with gas tests at PSL 3G and 4 |
Construction
| Parameter | Value |
|---|---|
| End connections | API 6A flanged, studded or clamp hub |
| Operation | Handwheel with ball-screw drive; actuator on request |
Application
| Parameter | Value |
|---|---|
| Typical service | High-pressure trees, frac and well-testing manifolds |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with API 6A documentation and the test record |
Shipping & lead time
What is an API 6A balanced-stem gate valve used for?▾
What do PSL 1 to 4 and PR1 or PR2 mean on an API 6A balanced-stem gate valve?▾
What sizes and pressure ratings does the API 6A balanced-stem gate valve come in?▾
When do I need a balanced-stem gate valve instead of a standard slab gate valve?▾
How is the API 6A balanced-stem gate valve tested?▾
Which material and temperature classes does the API 6A balanced-stem gate valve offer?▾
Is the API 6A balanced-stem gate valve to API specification, and what documents are supplied?▾
How is the API 6A balanced-stem gate valve operated?▾
What does the tail rod do on a balanced-stem gate valve?▾
Balanced-stem gate valve or slab gate valve at high pressure: how do they differ?▾
Can the API 6A balanced-stem gate valve be supplied from Dubai with test records?▾
Do you stock the API 6A balanced-stem gate valve in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Oilfield & pressure control
Reading an API 6A nameplate: pressure, material class, temperature class, PSL and PR
An API 6A valve or wellhead nameplate packs a specification into a line of codes: EE-1.5, P+U, PSL 3G, PR2. What each one means, how they show up on the valves we list, and what to send when replacing one.
7 min read
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read
Drilling rig equipment
Model 72 or DM: choosing an Oteco mud gate valve
Oteco makes two mud gate valves. The Model 72 is a rising-stem valve to 5,000 psi with body subs for its ends and a published Cameron Type ‘S’ parts interchange. The DM reaches 7,500 psi and rebuilds in line. How they differ, how to read their model numbers, and which one to specify.
5 min read







