Mud Gate Valve, 1-13/16″, 7,500 psi

1-13/16″ mud gate valve, 7,500 psi. Supplied new from NOV, end connections and trim to your specification.
Key features
- Valve Type: Mud gate valve
- Nominal Size: 1-13/16 in
- Working Pressure: 7500 psi
- End Connection (Inlet): Butt-weld, flanged or union to order
- Valve Type
- Mud gate valve
- Nominal Size
- 1-13/16 in
- Working Pressure
- 7500 psi
- Pressure Class
- 7.5K
Product description
A 1-13/16″ gate valve rated 7,500 psi, for drilling mud service — standpipe manifolds and mud pump discharge lines. We supply it new from NOV, with the end connections and trim you specify. The table lists the models and nameplate markings we have seen at this size and rating.
Makes and models at this rating
| Make | Model | Part / assembly no. | PSL | PR | Material class | Temperature |
|---|---|---|---|---|---|---|
| NOV Mission | Mud valve | A89160-2 | — | — | — | −29 °C to +121 °C |
| NOV Mission | Mud valve | — | — | — | — | −18 °C to +121 °C |
Each row is what is marked on a valve we have photographed at this bore and pressure; a dash means the nameplate does not state it or is not legible. Your valve is built to the specification you put on the RFQ, not to these plates.
Rating
- Working pressure: 7,500 psi.
- Sour service: the NOV Mission mud valves here are marked for a maximum H₂S partial pressure of 0.5 psia.
- End connections: butt-weld, flanged or union to order.
Ordering
Put the size, pressure, end connections, trim and service (standard or sour, with the H₂S partial pressure) on your RFQ, with a preferred make and model if you have one. We confirm lead time and documentation on the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve Type | Mud gate valve |
| Makes available | NOV |
| Part / assembly numbers seen | A89160-2 |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 1-13/16 in |
| End Connection (Inlet) | Butt-weld, flanged or union to order |
| End Connection (Outlet) | Butt-weld, flanged or union to order |
| Bore Type | Full bore |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 7500 psi |
| Pressure Class | 7.5K |
| Temperature markings seen | −29 °C to +121 °C; −18 °C to +121 °C |
Shipping & lead time
What is a 1-13/16 in 7,500 psi mud gate valve used for?▾
What do the nameplate markings on a 1-13/16 in 7,500 psi mud gate valve tell me?▾
What end connections can a 1-13/16 in mud gate valve be supplied with?▾
Should I choose the 1-13/16 in 7,500 psi gate valve or the 2-9/16 in at the same 7.5K rating?▾
What is the working pressure of a 1-13/16 in mud gate valve?▾
What material and sour-service options does a 1-13/16 in 7,500 psi mud gate valve have?▾
Is the 1-13/16 in 7,500 psi mud gate valve API monogrammed and what documents come with it?▾
Which makes and models of 1-13/16 in 7,500 psi gate valve can you supply?▾
What temperature range does a 1-13/16 in 7,500 psi mud gate valve work in?▾
Mud gate valve or API 6A wellhead gate valve at 1-13/16 in: what is the difference?▾
Can a 1-13/16 in 7,500 psi gate valve be exported from Dubai, and what about the HS code?▾
Do you stock the 1-13/16 in 7,500 psi mud gate valve in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Oilfield & pressure control
Reading an API 6A nameplate: pressure, material class, temperature class, PSL and PR
An API 6A valve or wellhead nameplate packs a specification into a line of codes: EE-1.5, P+U, PSL 3G, PR2. What each one means, how they show up on the valves we list, and what to send when replacing one.
7 min read
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read
Drilling rig equipment
Model 72 or DM: choosing an Oteco mud gate valve
Oteco makes two mud gate valves. The Model 72 is a rising-stem valve to 5,000 psi with body subs for its ends and a published Cameron Type ‘S’ parts interchange. The DM reaches 7,500 psi and rebuilds in line. How they differ, how to read their model numbers, and which one to specify.
5 min read







