Oteco Drill Pipe Float Valve, Plunger Type — Models F, FC, FA

Oteco plunger-type drill pipe float valves, Models F, FC and FA, sizes 1R to 6F, standard and sour gas — 43 assemblies. Authorised Oteco distributor, UAE stock.
Key features
- Valve Type: Drill pipe float valve, plunger type
- Nominal Size: 1R to 6F
- Service Class: Standard, sour gas (H2S)
- Valve type
- Drill pipe float valve, plunger type
- Nominal size
- 1R to 6F
- Service
- Standard, sour gas (H2S)
Product description
Oteco plunger-type drill pipe float valves sit in a float sub or bit sub above the bit and stop drilling fluid, cuttings and well fluid from flowing back up the drill string. This listing covers 43 assemblies in standard and sour gas (H2S) service.
- Model F — standard plunger, all sizes 1R to 6F.
- Model FC — automatic fill: a key holds the plunger open while running in, so the string fills, until flow releases it (2F-3R to 6F).
- Model FA — pressure monitoring: a port through the plunger lets you read shut-in pressure below the valve (all sizes).
Oteco float valves have one-piece cast bodies — not welded — in ductile iron or low-alloy steel, heat treated to 22 HRC or below for sour-gas hardness. Plungers are machined from one solid piece, flappers are case-hardened low-alloy steel, springs are Inconel as standard, and seals are nitrile, HNBR or Viton. Oteco makes its float valves and parts to standard industry dimensions so they fit standard float subs and bit subs.
Sizes
Float valve dimensions, inches (Oteco float valve brochure)
| Size | Valve dia. D | Recess dia. R | Length L | Baffle recess T | Valve ID, Model F | Valve ID, Model G |
|---|---|---|---|---|---|---|
| 1R | 1-21/32 | 1-11/16 | 5-7/8 | 1-5/16 | 1 | — |
| 1F-2R | 1-29/32 | 1-15/16 | 6-1/4 | 1-1/2 | 1-1/4 | 1 |
| 2F-3R | 2-13/32 | 2-7/16 | 6-1/2 | 1-29/32 | 1-9/16 | 1-1/4 |
| 3F | 2-13/16 | 2-27/32 | 10 | 2-7/16 | 1-7/8 | 1-5/8 |
| 3.5IF | 3-1/8 | 3-5/32 | 10 | 2-11/16 | 1-7/8 | 1-5/8 |
| 4R | 3-15/32 | 3-1/2 | 8-5/16 | 2-15/16 | 2-5/16 | 1-31/32 |
| 4F | 3-21/32 | 3-11/16 | 12 | 3-1/4 | 2-1/2 | 2-3/16 |
| 5R | 3-7/8 | 3-29/32 | 9-3/4 | 3-3/8 | 2-3/4 | 2-1/4 |
| 5F-6R | 4-25/32 | 4-13/16 | 11-3/4 | 4-9/32 | 3-1/4 | 2-7/8 |
| 6F | 5-11/16 | 5-23/32 | 14-5/8 | 5-3/16 | 4-1/8 | — |
The valve recess in the sub is A = valve length L + the tool-joint pin length + 1/4-inch clearance. Ignore T if it is the same as, or smaller than, the tool-joint ID.
Typical bit subs (first rows of the Oteco bit-sub table)
| Size | Bit-sub thread (API Regular) | Standard sub OD | Sub length |
|---|---|---|---|
| 1R | 2-3/8" | 3-1/8" | 18" |
| 1F-2R | 2-7/8" | 3-3/4" | 20" |
| 2F-3R | 3-1/2" | 4-1/4" | 20" |
| 4R | 4-1/2" | 5-1/2" | 24" |
| 5R | 5-1/2" | 6-3/4" | 28" |
Metal repair kits dress a valve three times and rubber kits four times; pullers remove the valve from the sub.
Related listings
- Oteco flapper float valves (G, GA, GC, GCA)
- Oteco baffle plates
- Oteco metal and rubber repair kits
- Oteco spare parts and pullers
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Valve type | Drill pipe float valve, plunger type |
| Manufacturer models | F, FC, FA |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Nominal size | 1R to 6F |
Performance
| Parameter | Value |
|---|---|
| Service | Standard, sour gas (H2S) |
| Temperature range | 0 °F to 450 °F (Oteco, seal dependent) |
Construction
| Parameter | Value |
|---|---|
| Body | One-piece cast ductile iron or low-alloy steel, ≤ 22 HRC |
| Springs | Inconel |
| Seals | NBR, HNBR or Viton |
Shipping & lead time
Sizes & part numbers
43 sizes- Indus part no.IH-OTC-480121200
- Model
- Model FA
- Type
- Plunger, pressure monitoring
- Size
- 1R
- Service
- Standard
- Indus part no.IH-OTC-480121422
- Model
- Model FA
- Type
- Plunger, pressure monitoring
- Size
- 1F-2R
- Service
- Standard
- Indus part no.IH-OTC-480122432
- Model
- Model FA
- Type
- Plunger, pressure monitoring
- Size
- 2F-3R
- Service
- Standard
- Indus part no.IH-OTC-480123400
- Model
- Model FA
- Type
- Plunger, pressure monitoring
- Size
- 3F
- Service
- Standard
- Indus part no.IH-OTC-480123600
- Model
- Model FA
- Type
- Plunger, pressure monitoring
- Size
- 3.5IF
- Service
- Standard
- Indus part no.IH-OTC-480124200
- Model
- Model FA
- Type
- Plunger, pressure monitoring
- Size
- 4R
- Service
- Standard
- Indus part no.IH-OTC-480124400
- Model
- Model FA
- Type
- Plunger, pressure monitoring
- Size
- 4F
- Service
- Standard
- Indus part no.IH-OTC-480125200
- Model
- Model FA
- Type
- Plunger, pressure monitoring
- Size
- 5R
- Service
- Standard
Show all 43 sizesShow fewer sizes
Model — Manufacturer model code, where one listing covers several models. Type — Valve type of this row, where one listing covers several. Size — Nominal pipe size (NPS), as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
What is the Oteco plunger-type drill pipe float valve (Models F, FC, FA)?▾
What do Oteco float valve Models F, FC and FA mean?▾
Which Oteco plunger float valve size do I need: 1R, 2F-3R, 3.5IF, 4F, 5F-6R or 6F?▾
What is the recess size for an Oteco plunger float valve in a sub?▾
What temperature range does the Oteco plunger float valve have?▾
What is the Oteco plunger float valve made of, and is there a sour gas (H2S) version?▾
What approvals does Oteco state for the plunger float valve?▾
Which baffle plates, repair kits and pullers go with the Oteco plunger float valve?▾
How often can an Oteco plunger float valve be redressed?▾
Plunger or flapper: how do Oteco Model F and Model G float valves compare?▾
Where is the Oteco plunger float valve made?▾
Is the Oteco plunger float valve in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Drilling rig equipment
Drill pipe float valves: plunger or flapper, models F to GCA, sizes and kits
A drill pipe float valve stops mud and well fluid flowing back up the string. Oteco makes plunger valves (F, FC, FA) and flapper valves (G, GA, GC, GCA) in ten sizes. How the models differ, how to read the size codes, and what a repair kit actually replaces.
6 min read
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read








