Drill Pipe Float Valve, Size 2F-3R (3-1/2″ Reg)

A size 2F-3R drill pipe float valve sits in the float sub or bit sub above the bit and stops drilling fluid and cuttings flowing back up the string when circulation stops, when connections are made, and in a kick. Size 2F-3R fits subs cut with a 3-1/2″ API Reg and 2-7/8″ API IF (box × pin) connection. We supply it new in Model G and Model GA (flapper) from Crestex, Baker, Forum and Drillmax.

Makes and models in this size

Part numbers are as cast on the valve cage or listed by the maker. Baker-pattern valves of the same size and model interchange in the same sub.

Models

• Model G (flapper): Full-opening flapper that swings clear of the bore, for abrasive fluids and unrestricted flow.
• Model GA (flapper, ported): Model G with a hardened 1/4 in tungsten-carbide orifice in the flapper, so differential pressure can be read at surface.

Dimensions

Models F and G share the same outside dimensions, so either fits the same float sub or bored-out drill collar.

Float sub connections

Running notes

• Forum rates its Model F and G valves at 7,500 psi working pressure; we confirm the rating of other makes on the quotation.
• If more than one float valve runs in the same string, space them apart.
• Choose a ported model (FA or GA) when you need to read shut-in drill pipe pressure or want the string to fill partly while running in.

Ordering

Give the size, model and sub connection on your RFQ, and say whether you need the float sub or bit sub as well. We confirm lead time and documentation on the quotation.