Oteco DM Gate Valve, 4 in, 3,000 to 7,500 psi

Oteco DM gate valves with 4-inch ends: DM 43, DM 45, DM 48, 3,000 to 7,500 psi, standard, stainless, sour gas and cold-service trims — 13 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Valve Type: Gate valve, DM series (mud and manifold service)
- Nominal Size: 4 in (end connections)
- Working Pressure: 3,000 to 7,500 psi
- End Connection (Inlet): Line pipe thread, EUE / casing thread, butt weld Sch. 160 / XXS, API ring-joint flange, Fig. 1002 / 1502 union
- Service Class: Standard, stainless, sour gas (H2S), cold service
- Valve type
- Gate valve, DM series (mud and manifold service)
- Nominal size
- 4 in (end connections)
- Working pressure
- 3,000 to 7,500 psi
- Service
- Standard, stainless, sour gas (H2S), cold service
Product description
The Oteco DM is a low-cost, in-line repairable gate valve for water, oil and gas service in mud, standpipe and production manifolds. This listing covers the valves with 4-inch end connections, on the 4.09-inch-port body: DM 43 (3,000 psi), DM 45 (5,000 psi), DM 48 (7,500 psi). In the model number the first digit is the end-connection size and the second the pressure class (2 = 2,000, 3 = 3,000, 5 = 5,000 and 8 = 7,500 psi). Where a part name carries two sizes, such as 3X2 or 4X5, they are the body size and the end-connection size.
How the valve is built
- High-strength weldable cast alloy body and bonnet (A487-4C on the 2-inch body, A487-4D on the larger ones).
- Corrosion-resistant gate and stem, high-strength steel seat inserts and 90-durometer main seals; Fluorotrel lip-cup stem seals on the 3- and 4-inch bodies.
- Tight fit tolerances, zinc-chromate plated studs and nuts and extended body-stud thread engagement; the 4-inch body leaves clearance for closed-end wrenches and sockets.
- Rebuilt in line with minor and major kits — see DM repair kits and DM spare parts.
Trims
DM trim options (Oteco DM brochure)
| Trim | Max. WP | Seat inserts (2–3" / 4") | Seat polymer | Temperature | Gate |
|---|---|---|---|---|---|
| SD standard | 5,000 psi | A487 / A487 | NBR 70 | −20 to 250 °F | 316 SS |
| SS stainless | 5,000 psi | 316 SS / 17-4 PH | NBR 70 | −20 to 250 °F | 316 SS |
| SG sour gas | 5,000 psi | 316 SS / 17-4 PH | HNBR 80 | −40 to 250 °F | 316 SS |
| CS cold service | 5,000 psi | 316 SS / 17-4 PH | HNBR 80 | −40 to 250 °F | 316 SS |
| HP high pressure (incl. HP/SS, HP/SG, HP/CS) | 7,500 psi | 17-4 PH / 17-4 PH | HNBR 80 | −40 to 250 °F | 17-4 PH |
Temperature limits depend on the seat polymer. 7,500 psi valves with flanged ends use 10,000 psi ring-joint flanges.
Dimensions
Dimensions, inches (mm) — Oteco DM brochure
| Model | End connection | A | B (end to end) | D (port) | F | G | H |
|---|---|---|---|---|---|---|---|
| DM 45 | 4" line pipe thread | 6-1/2 (165) | 13 (330) | 4-1/16 (103) | 24-9/16 (624) | 23 (584) | 11-1/8 (283) |
| DM 45 / 48 | 4" butt weld (48: Sch. XXS) | 6-1/2 (165) | 13 (330) | 4-1/16 (103) | 24-9/16 (624) | 23 (584) | 11-1/8 (283) |
| DM 45 | 4-1/16" 5,000 psi flange (R-39) | 9 (229) | 18 (457) | 4-1/16 (103) | 24-9/16 (624) | 23 (584) | 11-1/8 (283) |
| DM 48 | 4-1/16" 10,000 psi flange (BX-155) | 13-3/16 (335) | 26-3/8 (670) | 4-1/16 (103) | 24-9/16 (624) | 23 (584) | 11-1/8 (283) |
Oteco publishes the DM dimensions for reference; we send the certified drawing with the quotation. Union-end DM valves are made to mate with FMC Weco Figure 1002 and 1502 unions (Oteco Engineering Bulletin EB-004).
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Valve type | Gate valve, DM series (mud and manifold service) |
| Manufacturer models | DM 43, DM 45, DM 48 |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Nominal size | 4 in (end connections) |
| End connections | Line pipe thread, EUE / casing thread, butt weld Sch. 160 / XXS, API ring-joint flange, Fig. 1002 / 1502 union |
Performance
| Parameter | Value |
|---|---|
| Working pressure | 3,000 to 7,500 psi |
| Temperature range | −20 °F to 250 °F (−40 °F with HNBR seats) |
| Service | Standard, stainless, sour gas (H2S), cold service |
Construction
| Parameter | Value |
|---|---|
| Body | Cast A487-4C (2 in) / A487-4D (3, 4 and 5 in) |
| Gate | 316 SS (CF8M); 17-4 PH on 7,500 psi valves |
| Seats and seals | NBR 70 or HNBR 80 seats; NBR or HNBR 90 bonnet seal |
Shipping & lead time
Sizes & part numbers
13 sizes- Indus part no.IH-OTC-154301
- Model
- DM 43
- Size
- 4"
- Class
- 3,000 psi
- Port
- 4.09"
- End connections
- 4" line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-154304
- Model
- DM 43
- Size
- 4"
- Class
- 3,000 psi
- Port
- 4.09"
- End connections
- 4" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-154501
- Model
- DM 45
- Size
- 4"
- Class
- 5,000 psi
- Port
- 4.09"
- End connections
- 4" line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-154503
- Model
- DM 45
- Size
- 4"
- Class
- 5,000 psi
- Port
- 4.09"
- End connections
- 4" butt weld, Sch. 160
- Service
- Standard
- Indus part no.IH-OTC-154504
- Model
- DM 45
- Size
- 4"
- Class
- 5,000 psi
- Port
- 4.09"
- End connections
- 4" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-154505
- Model
- DM 45
- Size
- 4"
- Class
- 5,000 psi
- Port
- 4.09"
- End connections
- 4-1/2" long casing 8-round thread (LCSG)
- Service
- Standard
- Indus part no.IH-OTC-154506
- Model
- DM 45
- Size
- 4"
- Class
- 5,000 psi
- Port
- 4.09"
- End connections
- 4" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-154508
- Model
- DM 45
- Size
- 4"
- Class
- 5,000 psi
- Port
- 4.09"
- End connections
- 4-1/16" 5,000 psi API flange, ring joint
- Service
- Standard
Show all 13 sizesShow fewer sizes
- Indus part no.IH-OTC-154804
- Model
- DM 48
- Size
- 4"
- Class
- 7,500 psi
- Port
- 4.09"
- End connections
- 4" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-154805
- Model
- DM 48
- Size
- 4"
- Class
- 7,500 psi
- Port
- 4.09"
- End connections
- 4-1/16" 10,000 psi API flange, ring joint
- Service
- Standard
- Indus part no.IH-OTC-154806
- Model
- DM 48
- Size
- 4"
- Class
- 7,500 psi
- Port
- 4.09"
- End connections
- 4" Fig. 1002 union, male × female
- Service
- Standard
- Indus part no.IH-OTC-154809
- Model
- DM 48
- Size
- 4"
- Class
- 7,500 psi
- Port
- 4.09"
- End connections
- 4" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-154810
- Model
- DM 48
- Size
- 4"
- Class
- 7,500 psi
- Port
- 4.09"
- End connections
- 4" Fig. 1502 union, male × female
- Service
- Standard
Model — Manufacturer model code, where one listing covers several models. Size — Nominal pipe size (NPS), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. Port — Full bore or reduced bore, as published. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is the Oteco DM gate valve with 4-inch ends (DM 43, DM 45 and DM 48) used for?▾
How do I read the Oteco DM 48 model code and part numbers?▾
Is the Oteco DM 48 interchangeable with other makers' DM-pattern gate valves?▾
Which Oteco DM trim should I order for the DM 48: SD, SS, SG, CS or HP?▾
What end connections are listed for the Oteco DM valves with 4-inch ends?▾
What pressure, temperature and dimensions apply to the Oteco DM 48?▾
What are the Oteco DM 4-inch valve body, gate and seats made of?▾
What approvals does Oteco state for the DM gate valve with 4-inch ends?▾
Which repair kits and spare parts fit the Oteco DM 48 valve?▾
How do I service the Oteco DM valve with 4-inch ends?▾
Where is the Oteco DM gate valve made, and who supplies it in the Middle East?▾
Is the Oteco DM gate valve with 4-inch ends in stock in Dubai, and what do you need for a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








