Oteco 160° Standpipe Goosenecks with Top Outlet, 3 in, 4 in, 5 in

Oteco 160° gooseneck with top outlet manifold fittings, 3", 4", 5", 3,000 to 8,000 psi, with line pipe, butt-weld Sch. 80 to XXS and special ends, standard and sour gas — 18 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Body Configuration: 160° gooseneck with top outlet
- End Connection: Line pipe thread (2–4 in), butt weld Sch. 80, 160 and XXS, special ends on request
- Size Range: 3", 4", 5"
- Pressure Class / Schedule: 3,000 to 8,000 psi
- Material: Cast ASTM A216 WCC; A487 Grade 4D modified for 7,500 and 8,000 psi
- Body configuration
- 160° gooseneck with top outlet
- Size range
- 3", 4", 5"
Product description
The Oteco 160° gooseneck with top outlet is a 160° standpipe gooseneck with a top outlet for a pressure gauge or a wireline entry. Long-sweep manifold fittings keep abrasive drilling mud flowing through the pump discharge, standpipe and choke and kill manifolds with less erosion and pressure loss than short-radius fittings.
Oteco manifold fittings are castings — ASTM A216 Grade WCC for the 2- to 5-inch 5,000 psi fittings, A487 Grade 4D modified for the 5-inch 7,500 and 8,000 psi extra-heavy-wall fittings — machined in single chuckings on horizontal machining centres and hydrostatically tested to at least 1-1/2 times working pressure. Butt-weld ends have a 37.5° bevel and match ASME B36.10 OD and ID; line-pipe threads are cut in the 2-, 3- and 4-inch sizes. Sour gas service is available on all fittings, and material tensile and chemical certification on request.
Maximum working / test pressure by end connection, psi (Oteco manifold fittings brochure)
| Size | Sch. 40 | Sch. 80 | Sch. 120 | Sch. 160 | Sch. XXS | API line pipe |
|---|---|---|---|---|---|---|
| 2" | 2,000 / 4,000 | 3,000 / 6,000 | — | 5,000 / 7,500 | 5,000 / 10,000 | 5,000 / 10,000 |
| 3" | 2,000 / 4,000 | 3,000 / 6,000 | — | 5,000 / 7,500 | 5,000 / 10,000 | 3,000 / 6,000 |
| 4" | 2,000 / 3,000 | 3,000 / 4,500 | 4,000 / 6,000 | 5,000 / 7,500 | 5,000 / 10,000 | 3,000 / 6,000 |
| 5" | 2,000 / 3,000 | 3,000 / 4,500 | 4,000 / 6,000 | 5,000 / 7,500 | 5,000 / 10,000 | — |
| 5" 7,500 psi | — | — | — | — | 7,500 / 11,250 | — |
| 5" and 6" 8,000 psi extra heavy wall | — | — | — | — | 8,000 / 12,000 | — |
The working pressure in the size table is the fitting's rating with its listed end connection: a threaded or Sch. 80 end rates below a Sch. 160 or XXS weld end on the same casting. Dimension letters for every style and size are on Oteco's dimension charts; we send the drawing with the quotation.
Related listings
- Oteco long-sweep full flow crosses
- Oteco long-sweep full flow tees
- Oteco long-sweep tees
- Oteco long-sweep y fittings
- Oteco 45° long-sweep ells
- Oteco 90° long-sweep ells
- Oteco 90° long-sweep ells with 2" outlet
- Oteco 160° standpipe goosenecks
- Oteco 180° standpipe goosenecks
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number, or the equipment, size and compound you need, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Body configuration | 160° gooseneck with top outlet |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3", 4", 5" |
| End connection | Line pipe thread (2–4 in), butt weld Sch. 80, 160 and XXS, special ends on request |
Performance
| Parameter | Value |
|---|---|
| Pressure class / schedule | 3,000 to 8,000 psi |
Construction
| Parameter | Value |
|---|---|
| Material | Cast ASTM A216 WCC; A487 Grade 4D modified for 7,500 and 8,000 psi |
| Manufacture | Cast, machined, hydrostatically tested to 1.5 × working pressure |
Compliance
| Parameter | Value |
|---|---|
| Applicable standards | ASME B36.10 weld ends, 37.5° bevel |
Shipping & lead time
Sizes & part numbers
18 sizes- Indus part no.IH-OTC-410009
- Model
- 444GTO
- Size
- 4"
- Class
- —
- End connections
- 4" butt weld, Sch. XXS × line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-410010
- Model
- 444GTO
- Size
- 4"
- Class
- 5,000 psi
- End connections
- 4" butt weld, Sch. 160
- Service
- Standard
- Indus part no.IH-OTC-410020
- Model
- 555GTO
- Size
- 5"
- Class
- 3,000 psi
- End connections
- 5" line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-410021
- Model
- 555GTO
- Size
- 5"
- Class
- —
- End connections
- 5" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-410022
- Model
- 555GTO
- Size
- 5"
- Class
- 5,000 psi
- End connections
- 5" butt weld, 127 mm (5.000 in) OD
- Service
- Standard
- Indus part no.IH-OTC-413051
- Model
- 333GTO
- Size
- 3"
- Class
- 3,000 psi
- End connections
- 3" line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-413053
- Model
- 333GTO
- Size
- 3"
- Class
- 5,000 psi
- End connections
- 3" butt weld, Sch. 160
- Service
- Standard
- Indus part no.IH-OTC-413054
- Model
- 333GTO
- Size
- 3"
- Class
- 5,000 psi
- End connections
- 3" butt weld, Sch. XXS
- Service
- Standard
Show all 18 sizesShow fewer sizes
- Indus part no.IH-OTC-414051
- Model
- 444GTO
- Size
- 4"
- Class
- 3,000 psi
- End connections
- 4" line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-414054
- Model
- 444GTO
- Size
- 4"
- Class
- 5,000 psi
- End connections
- 4" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-414055
- Model
- 444GTO
- Size
- 4"
- Class
- 5,000 psi
- End connections
- 4" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-415053
- Model
- 555GTO
- Size
- 5"
- Class
- 5,000 psi
- End connections
- 5" butt weld, Sch. 160
- Service
- Standard
- Indus part no.IH-OTC-415054
- Model
- 555GTO
- Size
- 5"
- Class
- 5,000 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-415055
- Model
- 555GTO
- Size
- 5"
- Class
- 5,000 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-417055
- Model
- 555GTO
- Size
- 5"
- Class
- 7,500 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-417057
- Model
- 555GTO
- Size
- 5"
- Class
- 7,500 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-418055
- Model
- 555GTO
- Size
- 5"
- Class
- 8,000 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-418057
- Model
- 555GTO
- Size
- 5"
- Class
- 8,000 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
Model — Manufacturer model code, where one listing covers several models. Size — Nominal pipe size (NPS), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is an Oteco 160° gooseneck with a top outlet?▾
How do I read Oteco models 333GTO, 444GTO and 555GTO?▾
Why choose the top-outlet gooseneck over the plain 160° gooseneck?▾
What sizes and ends does the Oteco top-outlet gooseneck come in?▾
Which 5" 555GTO do I choose for 7,500 or 8,000 psi?▾
What pressure ratings do the Oteco top-outlet goosenecks have?▾
Are there sour gas (H2S) Oteco top-outlet goosenecks?▾
What is the top-outlet gooseneck made from?▾
What fits the top outlet of an Oteco gooseneck?▾
Where is the Oteco gooseneck with top outlet used?▾
Who makes the Oteco 160° gooseneck with top outlet?▾
How do I order an Oteco 160° gooseneck with top outlet?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








