Oteco Long-Sweep Full Flow Crosses, 2 in, 3 in, 4 in, 5 in

Oteco long sweep full flow cross manifold fittings, 2", 3", 4", 5", 3,000 to 8,000 psi, with line pipe, butt-weld Sch. 80 to XXS and special ends, standard and sour gas — 16 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Body Configuration: Long sweep full flow cross
- End Connection: Line pipe thread (2–4 in), butt weld Sch. 80, 160 and XXS, special ends on request
- Size Range: 2", 3", 4", 5"
- Pressure Class / Schedule: 3,000 to 8,000 psi
- Material: Cast ASTM A216 WCC; A487 Grade 4D modified for 7,500 and 8,000 psi
- Body configuration
- Long sweep full flow cross
- Size range
- 2", 3", 4", 5"
Product description
The Oteco long sweep full flow cross is a four-way long-sweep cross with full bore through every leg. Long-sweep manifold fittings keep abrasive drilling mud flowing through the pump discharge, standpipe and choke and kill manifolds with less erosion and pressure loss than short-radius fittings.
Oteco manifold fittings are castings — ASTM A216 Grade WCC for the 2- to 5-inch 5,000 psi fittings, A487 Grade 4D modified for the 5-inch 7,500 and 8,000 psi extra-heavy-wall fittings — machined in single chuckings on horizontal machining centres and hydrostatically tested to at least 1-1/2 times working pressure. Butt-weld ends have a 37.5° bevel and match ASME B36.10 OD and ID; line-pipe threads are cut in the 2-, 3- and 4-inch sizes. Sour gas service is available on all fittings, and material tensile and chemical certification on request.
Maximum working / test pressure by end connection, psi (Oteco manifold fittings brochure)
| Size | Sch. 40 | Sch. 80 | Sch. 120 | Sch. 160 | Sch. XXS | API line pipe |
|---|---|---|---|---|---|---|
| 2" | 2,000 / 4,000 | 3,000 / 6,000 | — | 5,000 / 7,500 | 5,000 / 10,000 | 5,000 / 10,000 |
| 3" | 2,000 / 4,000 | 3,000 / 6,000 | — | 5,000 / 7,500 | 5,000 / 10,000 | 3,000 / 6,000 |
| 4" | 2,000 / 3,000 | 3,000 / 4,500 | 4,000 / 6,000 | 5,000 / 7,500 | 5,000 / 10,000 | 3,000 / 6,000 |
| 5" | 2,000 / 3,000 | 3,000 / 4,500 | 4,000 / 6,000 | 5,000 / 7,500 | 5,000 / 10,000 | — |
| 5" 7,500 psi | — | — | — | — | 7,500 / 11,250 | — |
| 5" and 6" 8,000 psi extra heavy wall | — | — | — | — | 8,000 / 12,000 | — |
The working pressure in the size table is the fitting's rating with its listed end connection: a threaded or Sch. 80 end rates below a Sch. 160 or XXS weld end on the same casting. Dimension letters for every style and size are on Oteco's dimension charts; we send the drawing with the quotation.
Related listings
- Oteco long-sweep full flow tees
- Oteco long-sweep tees
- Oteco long-sweep y fittings
- Oteco 45° long-sweep ells
- Oteco 90° long-sweep ells
- Oteco 90° long-sweep ells with 2" outlet
- Oteco 160° standpipe goosenecks
- Oteco 160° standpipe goosenecks with top outlet
- Oteco 180° standpipe goosenecks
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number, or the equipment, size and compound you need, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Body configuration | Long sweep full flow cross |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2", 3", 4", 5" |
| End connection | Line pipe thread (2–4 in), butt weld Sch. 80, 160 and XXS, special ends on request |
Performance
| Parameter | Value |
|---|---|
| Pressure class / schedule | 3,000 to 8,000 psi |
Construction
| Parameter | Value |
|---|---|
| Material | Cast ASTM A216 WCC; A487 Grade 4D modified for 7,500 and 8,000 psi |
| Manufacture | Cast, machined, hydrostatically tested to 1.5 × working pressure |
Compliance
| Parameter | Value |
|---|---|
| Applicable standards | ASME B36.10 weld ends, 37.5° bevel |
Shipping & lead time
Sizes & part numbers
16 sizes- Indus part no.IH-OTC-410034
- Model
- 2222X
- Size
- 2"
- Class
- 3,000 psi
- End connections
- 2" line pipe thread × 2-1/2" line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-410037
- Model
- 3333X
- Size
- 3"
- Class
- 5,000 psi
- End connections
- 3" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-412101
- Model
- 2222X
- Size
- 2"
- Class
- 5,000 psi
- End connections
- 2" line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-412103
- Model
- 2222X
- Size
- 2"
- Class
- 5,000 psi
- End connections
- 2" butt weld, Sch. 160
- Service
- Standard
- Indus part no.IH-OTC-412104
- Model
- 2222X
- Size
- 2"
- Class
- 5,000 psi
- End connections
- 2" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-414101
- Model
- 4444X
- Size
- 4"
- Class
- 3,000 psi
- End connections
- 4" line pipe thread
- Service
- Standard
- Indus part no.IH-OTC-414103
- Model
- 4444X
- Size
- 4"
- Class
- 5,000 psi
- End connections
- 4" butt weld, Sch. 160
- Service
- Standard
- Indus part no.IH-OTC-414104
- Model
- 4444X
- Size
- 4"
- Class
- 5,000 psi
- End connections
- 4" butt weld, Sch. XXS
- Service
- Standard
Show all 16 sizesShow fewer sizes
- Indus part no.IH-OTC-414107
- Model
- 4444X
- Size
- 4"
- Class
- 5,000 psi
- End connections
- 4" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-415103
- Model
- 5555X
- Size
- 5"
- Class
- 5,000 psi
- End connections
- 5" butt weld, Sch. 160
- Service
- Standard
- Indus part no.IH-OTC-415104
- Model
- 5555X
- Size
- 5"
- Class
- 5,000 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-415105
- Model
- 5555X
- Size
- 5"
- Class
- 5,000 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-417035
- Model
- 5555X
- Size
- 5"
- Class
- 7,500 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-417037
- Model
- 5555X
- Size
- 5"
- Class
- 7,500 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
- Indus part no.IH-OTC-418035
- Model
- 5555X
- Size
- 5"
- Class
- 8,000 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Standard
- Indus part no.IH-OTC-418037
- Model
- 5555X
- Size
- 5"
- Class
- 8,000 psi
- End connections
- 5" butt weld, Sch. XXS
- Service
- Sour gas (H2S)
Model — Manufacturer model code, where one listing covers several models. Size — Nominal pipe size (NPS), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is an Oteco long-sweep full flow cross used for?▾
How do I read the Oteco cross model code 5555X and part number IH-OTC-415104?▾
How does an Oteco full flow cross differ from a full flow tee?▾
What sizes and end connections does the Oteco long-sweep full flow cross come in?▾
Which Oteco 4444X or 5555X cross should I pick for a 5,000 psi manifold?▾
What working pressures does the Oteco long-sweep full flow cross carry?▾
Is there a sour gas (H2S) Oteco full flow cross?▾
What material is the Oteco 5555X cross cast in, and how is it tested?▾
What do I fit with an Oteco full flow cross in a mud manifold?▾
Where is an Oteco 4444X full flow cross installed on a rig?▾
Who makes the Oteco long-sweep full flow cross?▾
How do I order an Oteco long-sweep full flow cross in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








