Skip to content
OTECOIH-OTC-MF-LSY· MADE IN UNITED STATES

Oteco Long-Sweep Y Fittings, 2 in, 4 in

Mud Manifold FittingsEx-stock · delivery in 3 days
Oteco long sweep y manifold fitting drawing with dimension letters
VIEW 01·Oteco long sweep y manifold fitting drawing with dimension letters
1 / 2

Oteco long sweep y manifold fittings, 2", 4", 3,000 to 5,000 psi, with line pipe, butt-weld Sch. 80 to XXS and special ends, standard and sour gas — 9 part numbers. Authorised Oteco distributor, UAE stock.

Key features

  • Body Configuration: Long sweep Y
  • End Connection: Line pipe thread (2–4 in), butt weld Sch. 80, 160 and XXS, special ends on request
  • Size Range: 2", 4"
  • Pressure Class / Schedule: 3,000 to 5,000 psi
  • Material: Cast ASTM A216 WCC; A487 Grade 4D modified for 7,500 and 8,000 psi
Body configuration
Long sweep Y
Size range
2", 4"
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The Oteco long sweep y is a long-sweep Y that splits or joins two lines with no hard turn. Long-sweep manifold fittings keep abrasive drilling mud flowing through the pump discharge, standpipe and choke and kill manifolds with less erosion and pressure loss than short-radius fittings.

Oteco manifold fittings are castings — ASTM A216 Grade WCC for the 2- to 5-inch 5,000 psi fittings, A487 Grade 4D modified for the 5-inch 7,500 and 8,000 psi extra-heavy-wall fittings — machined in single chuckings on horizontal machining centres and hydrostatically tested to at least 1-1/2 times working pressure. Butt-weld ends have a 37.5° bevel and match ASME B36.10 OD and ID; line-pipe threads are cut in the 2-, 3- and 4-inch sizes. Sour gas service is available on all fittings, and material tensile and chemical certification on request.

Maximum working / test pressure by end connection, psi (Oteco manifold fittings brochure)

SizeSch. 40Sch. 80Sch. 120Sch. 160Sch. XXSAPI line pipe
2"2,000 / 4,0003,000 / 6,000—5,000 / 7,5005,000 / 10,0005,000 / 10,000
3"2,000 / 4,0003,000 / 6,000—5,000 / 7,5005,000 / 10,0003,000 / 6,000
4"2,000 / 3,0003,000 / 4,5004,000 / 6,0005,000 / 7,5005,000 / 10,0003,000 / 6,000
5"2,000 / 3,0003,000 / 4,5004,000 / 6,0005,000 / 7,5005,000 / 10,000—
5" 7,500 psi————7,500 / 11,250—
5" and 6" 8,000 psi extra heavy wall————8,000 / 12,000—

The working pressure in the size table is the fitting's rating with its listed end connection: a threaded or Sch. 80 end rates below a Sch. 160 or XXS weld end on the same casting. Dimension letters for every style and size are on Oteco's dimension charts; we send the drawing with the quotation.

Related listings

Supply from the UAE

Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number, or the equipment, size and compound you need, and we confirm the part and the delivery.

Identification

ParameterValue
Body configurationLong sweep Y
MakerOteco Inc., Houston, Texas, USA

Dimensions

ParameterValue
Size range2", 4"
End connectionLine pipe thread (2–4 in), butt weld Sch. 80, 160 and XXS, special ends on request

Performance

ParameterValue
Pressure class / schedule3,000 to 5,000 psi

Construction

ParameterValue
MaterialCast ASTM A216 WCC; A487 Grade 4D modified for 7,500 and 8,000 psi
ManufactureCast, machined, hydrostatically tested to 1.5 × working pressure

Compliance

ParameterValue
Applicable standardsASME B36.10 weld ends, 37.5° bevel

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in United States

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at