What sizes does the ORFS Male O-Ring × ORFS Female Run Tee come in?

8 sizes are listed, covering -04 to -24. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one.

Is it available in stainless steel?

Yes. Every size is available in 316 stainless steel on request — add "-SS" to the part number when you enquire. Lead time is longer than for the zinc-plated carbon-steel stock.

Can I get it faster than the quoted lead time?

Tell us it is a plant-down job when you enquire. Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST.

What pressure is it rated for?

The manufacturer states between 250 and 630 bar depending on size, and the figure is printed against each size in the table. That is the rating of the adapter; the assembly is limited by whichever component is rated lowest — hose, tube or the port you are mating to.

What thread family does this adapter use?

ORFS. SAE J1453, ISO 8434-3. The seat is ORFS flat face with O-ring. Check the thread on each end against the size table before ordering.

What are the port specs?

Port A: ORFS Male O-Ring. Port B: ORFS Female. Port A: UN/UNF 9/16-18 to 2-12. Port B: UN/UNF 9/16-18 to 2-12. Port C: UN/UNF 9/16-18 to 2-12.

What sizes are available?

8 sizes are listed, covering -04 to -24. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one. Sizes outside the table are quoted on request.

What is the maximum working pressure?

The manufacturer states 250 to 630 bar depending on size, and the figure is printed against each size in the table. The rating of an assembly tracks its lowest-rated component, so check it against the hose, the tube and the port you are mating to.

What materials and finishes are available?

Standard: carbon steel with a zinc-plated, Cr3+ passivated, RoHS-compliant finish. 316 stainless steel is available on request for marine, chemical or food-grade service — add "-SS" to the part number when you enquire.

Is this adapter interchangeable with other thread families?

No. ORFS is a thread family in its own right and does not interchange with BSP, JIC, NPT, metric or ORFS. Where you need to cross between families, use the adapter built for that pair rather than forcing a thread that nearly fits.

Do I need to crimp this onto a hose?

No. These are tube and port adapters, not hose ends — they thread into a port or join two threaded ends. For a hose assembly use Indus crimp ferrules with the matching Indus hose-end fitting.

Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST. Less-common combinations ship within 7 working days of RFQ confirmation; say if it is a plant-down job and we will prioritise it.

INDUS HYDRAULICSIH-AD-ORFS-027

ORFS Male O-Ring × ORFS Female Run Tee

Name: ORFS Male O-Ring × ORFS Female Run Tee
Brand: Indus Hydraulics
SKU: IH-AD-ORFS-027

ORFS AdaptersEx-stock · delivery in 3 days

VIEW 01·Run tee, ORFS male O-ring × ORFS female swivel nut, O-ring branch

ORFS Male O-Ring × ORFS Female Run Tee — ORFS adapter, run tee body, 8 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.

Key features

Body Configuration: run tee
Port A Thread: UN/UNF 9/16-18 to 2-12
Port A Sealing: ORFS flat face with O-ring
Nominal Size Range: -04 to -24
Max Working Pressure: up to 630 bar (9,137 psi), manufacturer stated

Body Configuration: run tee
Port A Thread: UN/UNF 9/16-18 to 2-12
Port A Sealing: ORFS flat face with O-ring
Nominal Size Range: -04 to -24
Max Working Pressure: up to 630 bar (9,137 psi), manufacturer stated

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The ORFS Male O-Ring × ORFS Female Run Tee is a run tee hydraulic adapter in the Indus ORFS range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions, the weight and the working pressure.

Construction

Body configuration: run tee
Port A: ORFS Male O-Ring
Port B: ORFS Female
Material: carbon steel (stainless steel available on request)
Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant

Threads

Port A: UN/UNF 9/16-18 to 2-12
Port B: UN/UNF 9/16-18 to 2-12
Port C: UN/UNF 9/16-18 to 2-12

Sealing

ORFS flat face with O-ring. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.

Performance

The manufacturer states 250 to 630 bar depending on size, printed against every size in the table. That is the rating of the adapter; an assembly is limited by whichever component is rated lowest — the hose, the tube or the port.

Applicable standards

SAE J1453, ISO 8434-3.

How to order

Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.

Companion products

These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.

Identification

Parameter	Value
Body Configuration	run tee

Port A

Parameter	Value
Port A Thread	UN/UNF 9/16-18 to 2-12
Port A Sealing	ORFS flat face with O-ring
Port A Gender	male

Port B

Parameter	Value
Port B Thread	UN/UNF 9/16-18 to 2-12
Port B Sealing	ORFS flat face with O-ring
Port B Gender	female

Port C

Parameter	Value
Port C Thread	UN/UNF 9/16-18 to 2-12

Dimensions

Parameter	Value
Nominal Size Range	-04 to -24

Performance

Parameter	Value
Max Working Pressure	up to 630 bar (9,137 psi), manufacturer stated

Construction

Parameter	Value
Material	Carbon steel (stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Compliance

Parameter	Value
Applicable Standards	SAE J1453, ISO 8434-3

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

8 sizes

Indus part no.	End 1	End 2	End 3	S1 (mm)	S2 (mm)	L1 (mm)	L2 (mm)	L3 (mm)	Weight (g)	Working pressure (bar)
IH-AD-ORFS-027-04	9/16"X18	9/16"X18	9/16"X18	14	19	21.5	21.5	26.5	80	630
IH-AD-ORFS-027-06	11/16"X18	11/16"X18	11/16"X18	19	22	25	25	29	130	630
IH-AD-ORFS-027-08	13/16"X18	13/16"X18	13/16"X18	19	27	28	28	38	195	630
IH-AD-ORFS-027-10	1"X14	1"X14	1"X14	27	30	33.5	33.5	41	333	400
IH-AD-ORFS-027-12	1.3/16"X12	1.3/16"X12	1.3/16"X12	30	36	37.5	37.5	46.5	513	400
IH-AD-ORFS-027-16	1.7/16"X12	1.7/16"X12	1.7/16"X12	36	41	41.5	41.5	53.5	785	400
IH-AD-ORFS-027-20	1.11/16"X12	1.11/16"X12	1.11/16"X12	41	50	44.5	44.5	58	1052	250
IH-AD-ORFS-027-24	2"X12	2"X12	2"X12	50	60	49	49	61	1525	250

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: T-Stück ORFS Außengewinde auf ORFS Innengewinde
fr: té ORFS mâle sur ORFS femelle
es: te ORFS macho a ORFS hembra
it: raccordo a T ORFS maschio a ORFS femmina

From the blog

Written about this range

Thread & fitting identification

Thread size and pitch, by family: the reference table for the bench

JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.

6 min read

Thread & fitting identification

Fittings on American machines: the inch families, and what travels with them

JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.

3 min read

Specification & standards

Where JIC is the wrong choice

JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.

4 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

90° ORFS male O-ring bulkhead elbow, long threaded leg with locknut

IH-AD-ORFS-028

ORFS Male O-Ring × ORFS Female Run Tee

Key features

Product description

Construction

Threads

Sealing

Performance

Applicable standards

How to order

Companion products

Identification

Port A

Port B

Port C

Dimensions

Performance

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Written about this range

Thread size and pitch, by family: the reference table for the bench

Fittings on American machines: the inch families, and what travels with them

Where JIC is the wrong choice

Engineers viewing this also looked at

90° Elbow ORFS Male O-Ring Bulkhead

90° ORFS Male O-Ring × NPT Male

ORFS Male O-Ring × Metric Thread Male Captive Seal

ORFS Male O-Ring × BSP Male O-Ring Run Tee

ORFS Male O-Ring Bulkhead Branch Tee

ORFS Cross Fittings

Steel ORFS Male × NPTF Male 45° Elbow

Steel ORFS Male × NPTF Male Branch Tee