ORFS Male O-Ring Bulkhead Branch Tee — ORFS adapter, branch tee body, 8 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: branch tee
- Port A Thread: UN/UNF 9/16-18 to 2-12
- Port A Sealing: ORFS flat face with O-ring
- Nominal Size Range: -04 to -24
- Max Working Pressure: up to 630 bar (9,137 psi), manufacturer stated
- Body Configuration
- branch tee
- Port A Thread
- UN/UNF 9/16-18 to 2-12
- Port A Sealing
- ORFS flat face with O-ring
- Nominal Size Range
- -04 to -24
- Max Working Pressure
- up to 630 bar (9,137 psi), manufacturer stated
Product description
The ORFS Male O-Ring Bulkhead Branch Tee is a branch tee hydraulic adapter in the Indus ORFS range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions, the weight and the working pressure.
Construction
- Body configuration: branch tee
- Port A: ORFS Male O-Ring
- Material: carbon steel (stainless steel available on request)
- Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant
Threads
- Port A: UN/UNF 9/16-18 to 2-12
- Port B: UN/UNF 9/16-18 to 2-12
- Port C: UN/UNF 9/16-18 to 2-12
Sealing
ORFS flat face with O-ring. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.
Performance
The manufacturer states 250 to 630 bar depending on size, printed against every size in the table. That is the rating of the adapter; an assembly is limited by whichever component is rated lowest — the hose, the tube or the port.
Applicable standards
SAE J1453, ISO 8434-3.
How to order
Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.
Companion products
These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | branch tee |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | UN/UNF 9/16-18 to 2-12 |
| Port A Sealing | ORFS flat face with O-ring |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | UN/UNF 9/16-18 to 2-12 |
| Port B Sealing | ORFS flat face with O-ring |
| Port B Gender | male |
Port C
| Parameter | Value |
|---|---|
| Port C Thread | UN/UNF 9/16-18 to 2-12 |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -24 |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 630 bar (9,137 psi), manufacturer stated |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J1453, ISO 8434-3 |
Shipping & lead time
The same part, in the designations used across European and Gulf trade catalogues.
- de
- ORFS Außengewinde mit O-Ring flachdichtend Schottverschraubung
- fr
- mâle ORFS siège plat avec joint torique traversée de cloison
- es
- macho ORFS con junta tórica asiento plano pasamuros
- it
- maschio ORFS sede piana con O-ring passaparatia
