Multi-Well Manifold (8-Well), 1502 Series, 15,000 psi, Standard Service

The Multi-Well Manifold (8-Well), 1502 Series, 15,000 psi, Standard Service is a multi-well manifold (8-well frac-spread distribution manifold — engineered to order) rated for 15,000 psi working pressure in standard service. Standard service rated for clean hydrocarbon, completion fluid, and water-cut streams.

Construction

• Type: Multi-Well Manifold
• Series / class: 1502 (15K)
• Configuration: 8-well frac-spread distribution manifold — engineered to order
• End A: 1502 Female Weco Union (×8 inlets)
• End B: 1502 Male Weco Union (×2-4 trunk outlets)
• Auxiliary: Plug-valve isolation per well + check-valve on each branch
• Bore / ID: Same as nominal
• Length: Skid-mounted, 12-20 ft footprint
• Material: Forged alloy steel (4130/4140), tempered
• Temperature rating: -20°F to 250°F (-29°C to 121°C)

Available sizes and configurations

This product family covers the following stock or short-lead nominal sizes / configurations: 4 in trunk × 3 in branches (typical) — engineered per spread. Other sizes and lengths within the same series and pressure class can be sourced from the OEM mill on a build-to-order basis (8–14 weeks lead). Indus quotes a firm size, pressure class, configuration, and service-class match against your inquiry data sheet — call or RFQ with the line specification and we will return a complete matched bill of materials.

Performance

Working pressure 15,000 psi (15K class), standard rated. Manufactured to API 16C, material class AA. Hydrostatic test at 1.5× shell pressure on every unit. Mill test reports per EN 10204 3.1 / 3.2 supplied with each shipment.

Applications

• Large-pad zipper-frac operations
• Multi-well simul-frac spreads
• High-throughput pumping pads

OEM equivalents and compatibility

This product is supplied as a recognised matched-pressure interchange for the following OEM standards and product lines (no implied authorised-distributor relationship — supplied by Indus Hydraulics):

• SPM 8-Well Manifold
• NOV Multi-Well
• Halliburton Pad Manifold
• Forum Energy

Compliance

• API 16C
• Material class: AA
• EN 10204 3.1 / 3.2 mill test reports
• Hydrostatic test certificates per unit

How to order

Confirm on your RFQ: (a) exact nominal size, length, and bore ID, (b) line working pressure and pressure class, (c) end-connection style and gender on each port (M / F, NPT / BW / Integral / RTJ / RF), (d) service class — sour (NACE MR0175) or standard, (e) any additional ports, taps, or instrumentation requirements, and (f) required certifications beyond the standard MTR + hydrostatic. Indus quotes ex-Dubai with full traceability.

Companion products

Pair with matched-pressure crossover unions, hammer unions, integral crosses / tees / elbows, plug valves, ball valves, check valves, and API 6BX flanges of the same WECO figure class. For frac-tree integration, also specify wellhead adapters, ring-joint gaskets, and BSL bolting in the matched pressure class.