Mi-T-M 90 Degree Elbows

Mi-T-M 90 Degree Elbows in brass, steel: 3 part numbers.
Product description
Mi-T-M 90 Degree Elbows in brass, steel: 3 part numbers.
Specification
- Type: 90 Degree Elbow
- Material: Brass, Steel
- Part numbers: 3
Sizes and part numbers
The Sizes & Part Numbers tab lists every Mi-T-M part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Mi-T-M part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Compatible With Brand | Mi-T-M |
Shipping & lead time
Sizes & part numbers
3 sizes- Mi-T-M part no.23-0391
- Description
- Elbow, 3/4 x 3/4 Inch Female, 90 Deg., Cast Brass
- Mi-T-M part no.23-0074
- Description
- Elbow, 3/8 Inch Male, 3/8 Inch Barb, 90 Deg., Brass
- Mi-T-M part no.24-0096
- Description
- Elbow, 90 Deg., 1 x 1 Inch FNPT, Black Pipe
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What are Mi-T-M 90 degree elbows used for?▾
How do I read Mi-T-M part numbers such as 23-0391 and 24-0096?▾
Which sizes do the Mi-T-M 90 degree elbows come in?▾
How do I choose between the three Mi-T-M elbows?▾
What pressure are the Mi-T-M 90 degree elbows rated for?▾
What are the Mi-T-M elbows made of?▾
Do the Mi-T-M 90 degree elbows follow a standard?▾
What do the Mi-T-M elbows connect to?▾
How should a Mi-T-M brass elbow be fitted?▾
Mi-T-M elbows or a brass hose barb elbow: which do I use?▾
Where are Mi-T-M elbows made, and can they be exported from Dubai?▾
Do you keep Mi-T-M 90 degree elbows in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Assembly, crimping & certification
Braided against spiral hose fittings: why the same thread comes in two crimp series
A JIC female swivel for 2SN and a JIC female swivel for 4SP look alike and are different parts. Which hoses each series fits, the end families in each, and what happens when they are swapped.
4 min read
Assembly, crimping & certification
Crimp fittings for braided hydraulic hose: series, ferrules, skive or no-skive, and the crimp diameter
Gates puts it bluntly: a 3,000 psi coupling on a 3,000 psi hose does not always make a 3,000 psi assembly. What makes it one is a fitting series approved for that hose, the matching ferrule, the right die and a crimp diameter inside a tolerance of a few thousandths of an inch. Crimp fittings and ferrules for 1SN, 2SN, 2SC and R16 braided hose — the end forms, skive and no-skive, ratings by size, and how to check a crimp.
11 min read
Assembly, crimping & certification
Hydraulic hose assembly: specifying, cutting, crimping, testing and tagging
A hose assembly is a manufactured part, not a length of hose with ends on. The steps that make one right — from the specification to the crimp diameter, the proof test and the tag — and the mistakes that make one wrong.
6 min read








