MannTek SBC-C Cable-Release Safety Breakaway Coupling — DN 50 to DN 150

MannTek SBC-C safety breakaway coupling released by cable rather than breaking bolts, for transfer lines with high operating pressure and a weak piping structure. Both valves close on release. DN 50 to DN 150. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Safety Breakaway Coupling
- Coupling Type / Variant: Cable-release type (SBC-C)
- End A Configuration: Thread, flange or hose shank (chosen per side)
- End B Configuration: Thread, flange or hose shank (chosen per side)
- Size Range: DN 50 to DN 150
- Coupling Family
- Safety Breakaway Coupling
- Coupling Type / Variant
- Cable-release type (SBC-C)
- End A Configuration
- Thread, flange or hose shank (chosen per side)
- End B Configuration
- Thread, flange or hose shank (chosen per side)
- Size Range
- DN 50 to DN 150
Product description
The SBC-C is MannTek's cable-release safety breakaway coupling. Like the breaking-bolt SBC it protects hose assemblies against excessive load, but it separates when its release cable is pulled instead of when bolts break under line tension. MannTek recommends it for transfer systems that combine a high operating pressure with a weak piping structure, where the pull needed to break bolts would load the pipework more than it can take.
How it works
The coupling consists of two halves, each with its own valve. In service the valves are held open. When the cable pulls the release, the coupling separates and both valves close immediately, so the line is shut off at both ends of the break.
Sizes and construction
- Sizes listed: DN 50, DN 63, DN 80, DN 100 and DN 150
- Body: stainless steel 1.4408 (AISI 316) as standard, or aluminium
- Inlet and outlet connections chosen individually: thread, flange or hose shank
- Seals and working pressure confirmed for the medium and line with the quotation
Choosing between SBC and SBC-C
Choose the breaking-bolt SBC where the line and its supports can carry the release force, and the SBC-C where they cannot, or where the release must be triggered from a fixed point by cable. Send us the line pressure, size and layout and we will propose the type.
Documents
MannTek's operating manual and the service instructions for the 2", 3", 4" and 6" sizes for the SBC-C cable-release coupling are attached in the Documents tab, as MannTek publishes them, for installation, operation and servicing. Download them before the coupling arrives so the site team has the procedure to hand.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the body material, the connection you need (thread type and size, or flange standard and rating), the seal material and the medium, and describe where the release cable will be anchored. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Safety Breakaway Coupling |
| Coupling Type / Variant | Cable-release type (SBC-C) |
| Notes | Seals, connections and working pressure confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Thread, flange or hose shank (chosen per side) |
| End B Configuration | Thread, flange or hose shank (chosen per side) |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | DN 50 to DN 150 |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Stainless steel 1.4408 (AISI 316, standard) or aluminium |
Performance
| Parameter | Value |
|---|---|
| Release | Pulled release cable; both valves close on separation |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-MNT-SBCC-050
- Description
- Body: stainless steel 1.4408 (AISI 316, standard) or aluminium
- Nominal size
- DN 50
- Indus part no.IH-MNT-SBCC-063
- Description
- Body: stainless steel 1.4408 (AISI 316, standard) or aluminium
- Nominal size
- DN 63
- Indus part no.IH-MNT-SBCC-080
- Description
- Body: stainless steel 1.4408 (AISI 316, standard) or aluminium
- Nominal size
- DN 80
- Indus part no.IH-MNT-SBCC-100
- Description
- Body: stainless steel 1.4408 (AISI 316, standard) or aluminium
- Nominal size
- DN 100
- Indus part no.IH-MNT-SBCC-150
- Description
- Body: stainless steel 1.4408 (AISI 316, standard) or aluminium
- Nominal size
- DN 150
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What is the MannTek SBC-C cable-release safety breakaway coupling used for?▾
Which sizes does the MannTek SBC-C come in?▾
MannTek SBC-C cable release or SBC breaking-bolt coupling: which one should I choose?▾
How does the MannTek SBC-C cable release work?▾
What is the MannTek SBC-C made of?▾
What connections can the MannTek SBC-C have?▾
What is the working pressure of the MannTek SBC-C?▾
What documents does MannTek publish for the SBC-C?▾
Where is the release cable anchored on an SBC-C?▾
When is a cable-release breakaway coupling better than breaking bolts?▾
Where is the MannTek SBC-C made and can it be exported from Dubai?▾
Do you stock the MannTek SBC-C breakaway coupling in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog


