Male JIC 37° with O-ring

male JIC 37° with o-ring — SS316L stainless-steel JIC hose fitting, straight, male. Passivated 316L for chemical, marine, and food-grade hydraulic service.
Key features
- Fitting Configuration: straight
- Thread Form: JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Sealing Form: 37° cone seat with O-ring
- Nominal Size Range: -04 to -32 (1/4" to 2")
- Fitting Configuration
- straight
- Thread Form
- JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Sealing Form
- 37° cone seat with O-ring
- Nominal Size Range
- -04 to -32 (1/4" to 2")
Product description
The male JIC 37° with o-ring is a SS316L stainless-steel hydraulic hose fitting in the straight configuration. Manufactured from 316L (austenitic, low-carbon, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Construction
- Configuration: straight
- Thread form: JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Sealing form: 37° cone seat with O-ring
- Gender: male
- Material: 316L stainless steel (austenitic, low-carbon, marine grade)
- Surface treatment: Passivated 316L (no plating; native corrosion-resistant oxide layer)
Performance
Pressure rating tracks the host hose grade and ferrule when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316L resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Applicable Standards
- SAE J514
- ISO 8434-2
How to order
Specify (a) the host hose grade and bore size, (b) the matching SS316L crimp ferrule (also available from Indus), and (c) the thread size on the SS316L body. Indus crimps and pressure-tests the assembly on request.
Companion products
Pair with Indus SS316L crimp ferrules and the matching SS316L hose grade for a fully stainless assembly. Browse the SS316L Fittings sub-section under Hoses & Fittings for matching thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | JIC 37° UN/UNF (7/16-20 to 1-7/8-12) |
| Sealing Form | 37° cone seat with O-ring |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -32 (1/4" to 2") |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel (austenitic, low-carbon, marine grade) |
| Surface Treatment | Passivated 316L (no plating; native corrosion-resistant oxide layer) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2 |
Shipping & lead time
What is the Male JIC 37° with O-ring used for?▾
Which sizes does the Male JIC 37° with O-ring come in?▾
When should I choose the Male JIC 37° with O-ring over the plain male?▾
What pressure rating does the Male JIC 37° with O-ring have?▾
What is the Male JIC 37° with O-ring made from, and where does stainless suit it?▾
Which standards does the Male JIC 37° with O-ring follow?▾
What does the Male JIC 37° with O-ring connect to?▾
How do I fit a Male JIC 37° with O-ring without cutting the O-ring?▾
Where is a Male JIC 37° with O-ring stainless fitting used?▾
Male JIC 37° with O-ring or the plain Male JIC 37°: how do they differ?▾
Where is the Male JIC 37° with O-ring supplied from, and can it be exported from Dubai?▾
Is the Male JIC 37° with O-ring in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade JIC Außengewinde mit O-Ring 37° Bördel
- fr
- mâle JIC cône 37° avec joint torique
- es
- macho JIC con junta tórica cono 37°
- it
- maschio JIC cono 37° con O-ring
From the blog
Written about this range
Failure analysis
Galvanic corrosion in fittings: what an upgrade moves rather than fixes
Put stainless into a plated steel port on a wet, salty site and the corrosion does not stop — it changes address. Sometimes that is the right trade.
3 min read
Failure analysis
Why fittings seize in coastal air, and what to change at fitting time
A seized joint is decided months earlier, at the moment somebody made it up. What that person could have done differently, and what they could not.
3 min read
Buying fittings & adapters
316L stainless hydraulic fittings: what the range covers, and how it behaves differently
BSP, JIC, ORFS, metric, NPT and NPSM, SAE flanges, standpipes and banjos, all in passivated 316L. What each family covers, the pressure and bolting rules on the flanges, and the galling problem.
4 min read




