Grade 80 Swivel Latch Hook LKNK with Ball Bearing — 1.12–15 t WLL

Grade 80 Swivel Latch Hook LKNK with Ball Bearing (EN 1677 / ASTM A952/A952M), in 7 sizes, 6 mm to 22 mm, WLL 1.12 to 15 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Swivel Latch Hook LKNK with Ball Bearing
- Pattern / standard: EN 1677 / ASTM A952/A952M
- Size range: 6 mm to 22 mm
- Working load limit: 1.12 to 15 t
- Size range
- 6 mm to 22 mm
- Working load limit
- 1.12 to 15 t
- Material
- Alloy steel
Product description
Grade 80 alloy fittings for building and repairing Grade 80 chain slings. Made to EN 1677 / ASTM A952/A952M. Alloy steel.
Sizes and ratings
7 sizes, 6 mm to 22 mm. Working load limit 1.12 to 15 t. Minimum breaking load 4.48 to 60 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged / quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the fitting to the chain size and grade, and select on WLL. A sling is rated by its weakest component.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Swivel Latch Hook LKNK with Ball Bearing |
| Pattern / standard | EN 1677 / ASTM A952/A952M |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm to 22 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.12 to 15 t |
| Minimum breaking load | 4.48 to 60 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-LR-G8-SLHLKNKBB-6MM
- Size
- 6 mm
- WLL (t)
- 1.12
- Min breaking load (t)
- 4.48
- A (mm)
- 30
- B (mm)
- 32.5
- C (mm)
- 11
- E (mm)
- 24
- H (mm)
- 19.3
- L (mm)
- 168
- L1 (mm)
- 138
- M (mm)
- 69
- N (mm)
- 16
- Weight (kg)
- 0.65
- Indus part no.IH-LR-G8-SLHLKNKBB-8MM
- Size
- 8 mm
- WLL (t)
- 2
- Min breaking load (t)
- 8
- A (mm)
- 45
- B (mm)
- 36
- C (mm)
- 13
- E (mm)
- 28.5
- H (mm)
- 23
- L (mm)
- 212
- L1 (mm)
- 173
- M (mm)
- 88.3
- N (mm)
- 20
- Weight (kg)
- 0.95
- Indus part no.IH-LR-G8-SLHLKNKBB-10MM
- Size
- 10 mm
- WLL (t)
- 3.15
- Min breaking load (t)
- 12.6
- A (mm)
- 53
- B (mm)
- 42
- C (mm)
- 15.5
- E (mm)
- 31
- H (mm)
- 29.5
- L (mm)
- 255
- L1 (mm)
- 208
- M (mm)
- 105
- N (mm)
- 22
- Weight (kg)
- 1.71
- Indus part no.IH-LR-G8-SLHLKNKBB-13MM
- Size
- 13 mm
- WLL (t)
- 5.3
- Min breaking load (t)
- 21.2
- A (mm)
- 63.8
- B (mm)
- 50
- C (mm)
- 17
- E (mm)
- 40.2
- H (mm)
- 38
- L (mm)
- 305.6
- L1 (mm)
- 249
- M (mm)
- 135
- N (mm)
- 32
- Weight (kg)
- 2.97
- Indus part no.IH-LR-G8-SLHLKNKBB-16MM
- Size
- 16 mm
- WLL (t)
- 8
- Min breaking load (t)
- 32
- A (mm)
- 68
- B (mm)
- 61
- C (mm)
- 21.5
- E (mm)
- 45
- H (mm)
- 45.4
- L (mm)
- 367
- L1 (mm)
- 6
- M (mm)
- 161
- N (mm)
- 37.5
- Weight (kg)
- 5.3
- Indus part no.IH-LR-G8-SLHLKNKBB-20MM
- Size
- 20 mm
- WLL (t)
- 12.5
- Min breaking load (t)
- 50
- A (mm)
- 90.5
- B (mm)
- 74
- C (mm)
- 25
- E (mm)
- 56
- H (mm)
- 50
- L (mm)
- 434.5
- L1 (mm)
- 356
- M (mm)
- 191.7
- N (mm)
- 49
- Weight (kg)
- 9.5
- Indus part no.IH-LR-G8-SLHLKNKBB-22MM
- Size
- 22 mm
- WLL (t)
- 15
- Min breaking load (t)
- 60
- A (mm)
- 100.5
- B (mm)
- 97
- C (mm)
- 33
- E (mm)
- 70
- H (mm)
- 62
- L (mm)
- 536
- L1 (mm)
- 441
- M (mm)
- 224
- N (mm)
- 58
- Weight (kg)
- 13.8
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. N — Dimension N on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Grade 80 Swivel Latch Hook LKNK with Ball Bearing and what is it used for?▾
How are the Indus part numbers for the Grade 80 Swivel Latch Hook LKNK with Ball Bearing structured?▾
What sizes does the Grade 80 Swivel Latch Hook LKNK with Ball Bearing come in?▾
How do I choose the right size of Grade 80 Swivel Latch Hook LKNK with Ball Bearing?▾
What is the working load limit of the Grade 80 Swivel Latch Hook LKNK with Ball Bearing?▾
What is the Grade 80 Swivel Latch Hook LKNK with Ball Bearing made from?▾
Does the Grade 80 Swivel Latch Hook LKNK with Ball Bearing come with a test certificate?▾
What should the Grade 80 Swivel Latch Hook LKNK with Ball Bearing be used with?▾
How should the Grade 80 Swivel Latch Hook LKNK with Ball Bearing be inspected and used safely?▾
Where is the Grade 80 Swivel Latch Hook LKNK with Ball Bearing typically used?▾
How does the Grade 80 Swivel Latch Hook LKNK with Ball Bearing differ from the Grade 80 Swivel Hoist Hook with Latch?▾
Do you stock the Grade 80 Swivel Latch Hook LKNK with Ball Bearing in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








