Grade 80 Omega Link Long
Grade 80 Omega Link Long (EN 1677), in 4 sizes, WLL 1.12 to 5.3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Omega Link Long
- Pattern / standard: EN 1677
- Working load limit: 1.12 to 5.3 t
- Working load limit
- 1.12 to 5.3 t
- Material
- Alloy steel
- Finish
- Yellow powder coated, other colour is available as per request
Product description
Grade 80 alloy fittings for building and repairing Grade 80 chain slings. Made to EN 1677. Alloy steel, yellow powder coated, other colour is available as per request.
Sizes and ratings
4 sizes. Working load limit 1.12 to 5.3 t. Minimum breaking load 4.48 to 21.2 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the fitting to the chain size and grade, and select on WLL. A sling is rated by its weakest component.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Omega Link Long |
| Pattern / standard | EN 1677 |
| Sizes | 4 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.12 to 5.3 t |
| Minimum breaking load | 4.48 to 21.2 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Yellow powder coated, other colour is available as per request |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Size | WLL (t) | Min breaking load (t) | A (mm) | B (mm) | D (mm) | K (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-G8-OLL-6MM | 6 mm | 1.12 | 4.48 | 8 | 28 | 20 | 47.5 | 75 | 0.12 |
| IH-LR-G8-OLL-7-8MM | 7–8 mm | 2 | 8 | 10 | 32.5 | 25 | 59 | 92 | 0.17 |
| IH-LR-G8-OLL-10MM | 10 mm | 3.15 | 12.6 | 13 | 45.5 | 30 | 78.5 | 123 | 0.43 |
| IH-LR-G8-OLL-13MM | 13 mm | 5.3 | 21.2 | 15 | 57.5 | 46 | 94 | 154 | 1 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 80 omega link long come in?▾
What is the working load limit?▾
Can I mix Grade 80 chain with Grade 100 fittings?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Grade 80 Shortening Grab Hook Clevis
Grade 80 Swivel Hoist Hook with Latch
Grade 80 Swivel Hook with Positive Locking Latch
Grade 80 Swivel Latch Hook LKNK with Ball Bearing
Grade 8 Swivel Sling Hook with Bearing Forged Latch
Grade 80 Twist Eye Choke Hook
Grade 80 Unilock Shackle Connecting Link
