Grade 80 Alloy Lifting Chain — 1,150–20,000 kg WLL

Grade 80 Alloy Lifting Chain, in 12 sizes, 6 mm (1/4″) to 26 mm (1″), WLL 1,150 to 20,000 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Alloy Lifting Chain
- Pattern / standard: Grade 80
- Size range: 6 mm (1/4″) to 26 mm (1″)
- Working load limit: 1,150 to 20,000 kg
- Size range
- 6 mm (1/4″) to 26 mm (1″)
- Working load limit
- 1,150 to 20,000 kg
- Material
- Alloy steel
Product description
Alloy lifting chain for chain slings and hoists. Alloy steel.
Sizes and ratings
12 sizes, 6 mm (1/4″) to 26 mm (1″). Working load limit 1,150 to 20,000 kg. Minimum breaking load 45 to 800 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Use it with fittings of the same grade and size, and select on WLL for the sling configuration. Proof and breaking forces are test figures.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Alloy Lifting Chain |
| Pattern / standard | Grade 80 |
| Sizes | 12 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm (1/4″) to 26 mm (1″) |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1,150 to 20,000 kg |
| Minimum breaking load | 45 to 800 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
12 sizes- Indus part no.IH-LR-CH-G80-6MM
- Size
- 6 mm (1/4″)
- WLL (kg)
- 1,150
- Proof load (kN)
- 22.5
- Min breaking load (kN)
- 45
- Inside length (mm)
- 18
- Inside width (mm)
- 8.7
- Weight (kg/m)
- 0.8
- Indus part no.IH-LR-CH-G80-7MM
- Size
- 7 mm (1/4″)
- WLL (kg)
- 1,570
- Proof load (kN)
- 30.8
- Min breaking load (kN)
- 61.6
- Inside length (mm)
- 22
- Inside width (mm)
- 10.5
- Weight (kg/m)
- 1.08
- Indus part no.IH-LR-CH-G80-8MM
- Size
- 8 mm (5/16″)
- WLL (kg)
- 2,050
- Proof load (kN)
- 40.3
- Min breaking load (kN)
- 80.6
- Inside length (mm)
- 24
- Inside width (mm)
- 12
- Weight (kg/m)
- 1.43
- Indus part no.IH-LR-CH-G80-9MM
- Size
- 9 mm
- WLL (kg)
- 2,500
- Proof load (kN)
- 50.8
- Min breaking load (kN)
- 102
- Inside length (mm)
- 27
- Inside width (mm)
- 12
- Weight (kg/m)
- 1.8
- Indus part no.IH-LR-CH-G80-10MM
- Size
- 10 mm (3/8″)
- WLL (kg)
- 3,200
- Proof load (kN)
- 63
- Min breaking load (kN)
- 126
- Inside length (mm)
- 30
- Inside width (mm)
- 14.5
- Weight (kg/m)
- 2.22
- Indus part no.IH-LR-CH-G80-13MM
- Size
- 13 mm (1/2″)
- WLL (kg)
- 5,400
- Proof load (kN)
- 107
- Min breaking load (kN)
- 214
- Inside length (mm)
- 39
- Inside width (mm)
- 19
- Weight (kg/m)
- 3.73
- Indus part no.IH-LR-CH-G80-13MML
- Size
- 13 mm (1/2″), long link
- WLL (kg)
- 5,400
- Proof load (kN)
- 107
- Min breaking load (kN)
- 214
- Inside length (mm)
- 82
- Inside width (mm)
- 24
- Weight (kg/m)
- 2.9
- Indus part no.IH-LR-CH-G80-16MM
- Size
- 16 mm (5/8″)
- WLL (kg)
- 8,200
- Proof load (kN)
- 161
- Min breaking load (kN)
- 322
- Inside length (mm)
- 48
- Inside width (mm)
- 23
- Weight (kg/m)
- 5.58
Show all 12 sizesShow fewer sizes
- Indus part no.IH-LR-CH-G80-19MM
- Size
- 19 mm (3/4″)
- WLL (kg)
- 11,200
- Proof load (kN)
- 227
- Min breaking load (kN)
- 454
- Inside length (mm)
- 57
- Inside width (mm)
- 26
- Weight (kg/m)
- 8
- Indus part no.IH-LR-CH-G80-20MM
- Size
- 20 mm (3/4″)
- WLL (kg)
- 12,500
- Proof load (kN)
- 250
- Min breaking load (kN)
- 500
- Inside length (mm)
- 60
- Inside width (mm)
- 28
- Weight (kg/m)
- 9
- Indus part no.IH-LR-CH-G80-22MM
- Size
- 22 mm (7/8″)
- WLL (kg)
- 15,000
- Proof load (kN)
- 300
- Min breaking load (kN)
- 600
- Inside length (mm)
- 66
- Inside width (mm)
- 29.5
- Weight (kg/m)
- 10.9
- Indus part no.IH-LR-CH-G80-26MM
- Size
- 26 mm (1″)
- WLL (kg)
- 20,000
- Proof load (kN)
- 400
- Min breaking load (kN)
- 800
- Inside length (mm)
- 78
- Inside width (mm)
- 35
- Weight (kg/m)
- 15.2
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. Inside length — Inside length of the link or bow. Inside width — Inside width of the link or jaw. Weight — Weight per metre, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Grade 80 Alloy Lifting Chain used for?▾
How do I read an Indus part number for Grade 80 Alloy Lifting Chain, such as IH-LR-CH-G80-6MM?▾
What sizes does Grade 80 Alloy Lifting Chain come in?▾
How do I choose the right size of Grade 80 Alloy Lifting Chain?▾
What is the rated load of Grade 80 Alloy Lifting Chain?▾
What is Grade 80 Alloy Lifting Chain made from, and what finish does it have?▾
What standard and certificate apply to Grade 80 Alloy Lifting Chain?▾
What does Grade 80 Alloy Lifting Chain connect to or work with?▾
How should Grade 80 Alloy Lifting Chain be inspected and looked after?▾
How does Grade 80 Alloy Lifting Chain differ from Grade 100 Alloy Lifting Chain?▾
How are Grade 80 Alloy Lifting Chain shipped, and can they be exported from Dubai?▾
Do you keep Grade 80 Alloy Lifting Chain in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Working load limit vs breaking strength: WLL, MBL, proof load and the factor between them
The breaking strength of a lifting component is not a number you lift to. It is the WLL multiplied by a design factor, and that factor runs from 4:1 on alloy chain to 7:1 on polyester slings. Here is how the four ratings relate, worked through with figures from our own tables.
9 min read
Lifting & rigging
Types of lifting slings: chain, wire rope, webbing and round slings compared
Chain slings survive heat, edges and rough handling. Wire rope slings are strong and stiff. Webbing and round slings are light and gentle on finished surfaces, but cut easily and stop at 100 °C. Here is how the four compare, and how to choose for the load in front of you.
9 min read
Lifting & rigging
Grade 80 vs Grade 100 chain slings: capacity, weight, heat and mixing components
Grade 100 chain carries about a quarter more than Grade 80 at the same size and weighs the same per metre — so for the same load it is a size smaller and much lighter. But Grade 80 tolerates more heat, and a sling with one Grade 80 part is a Grade 80 sling. How to choose between them, with our tables side by side.
3 min read


