Grade 80 Hoist Chain — EN 818-7
Grade 80 Hoist Chain (EN 818-7), in 29 sizes, WLL 140 to 12,500 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Hoist Chain
- Pattern / standard: EN 818-7
- Working load limit: 140 to 12,500 kg
- Working load limit
- 140 to 12,500 kg
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Alloy lifting chain for chain slings and hoists. Made to EN 818-7. Alloy steel, powder coated.
Sizes and ratings
29 sizes. Working load limit 140 to 12,500 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Welded.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Use it with fittings of the same grade and size, and select on WLL for the sling configuration. Proof and breaking forces are test figures.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Hoist Chain |
| Pattern / standard | EN 818-7 |
| Sizes | 29 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 140 to 12,500 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
29 sizes| Indus part no. | Size | WLL (kg) | Pitch (mm) | H (mm) | w (mm) | Weight (kg/m) |
|---|---|---|---|---|---|---|
| IH-LR-CH-80HCE8187-K30X90 | K3,0x9,0 | 140 | 9 | 10.4 | 3 | 0.21 |
| IH-LR-CH-80HCE8187-K40X120 | K4,0x12,0 | 400 | 12 | 13.7 | 4 | 0.35 |
| IH-LR-CH-80HCE8187-K50X150 | K5,0x15,0 | 630 | 15 | 16.9 | 5 | 0.54 |
| IH-LR-CH-80HCE8187-K56X170 | K5,6×17,0 | 800 | 17 | 18.9 | 5.6 | 0.68 |
| IH-LR-CH-80HCE8187-K60X180 | K6,0x18,0 | 900 | 18 | 20.2 | 6 | 0.8 |
| IH-LR-CH-80HCE8187-K60X185 | K6,0x18,5 | 900 | 18.5 | 20.2 | 6 | 0.8 |
| IH-LR-CH-80HCE8187-K63X190 | K6,3×19,0 | 1,000 | 19 | 21.4 | 6.3 | 0.86 |
| IH-LR-CH-80HCE8187-K63X191 | K6,3×19,1 | 1,000 | 19.1 | 21.4 | 6.3 | 0.86 |
| IH-LR-CH-80HCE8187-K65X185 | K6,5×18,5 | 1,100 | 18.5 | 21.8 | 6.5 | 0.94 |
| IH-LR-CH-80HCE8187-K65X195 | K6,5×19,5 | 1,100 | 19.5 | 21.8 | 6.5 | 0.92 |
| IH-LR-CH-80HCE8187-K70X210 | K7,0x21,0 | 1,250 | 21 | 23.6 | 7 | 1.1 |
| IH-LR-CH-80HCE8187-K70X220 | K7,0x22,0 | 1,250 | 22 | 23.6 | 7 | 1.1 |
| IH-LR-CH-80HCE8187-K71X202 | K7,1×20,2 | 1,250 | 20.2 | 23.6 | 7.1 | 1.1 |
| IH-LR-CH-80HCE8187-K71X212 | K7,1×21,2 | 1,250 | 21.2 | 23.9 | 7.1 | 1.1 |
| IH-LR-CH-80HCE8187-K79X218 | K7,9×21,8 | 1,600 | 21.8 | 27 | 7.9 | 1.4 |
| IH-LR-CH-80HCE8187-K79X230 | K7,9×23,0 | 1,600 | 23 | 27 | 7.9 | 1.4 |
| IH-LR-CH-80HCE8187-K80X220 | K8,0x22,0 | 1,600 | 22 | 27 | 8 | 1.4 |
| IH-LR-CH-80HCE8187-K80X240 | K8,0x24,0 | 1,600 | 24 | 27 | 8 | 1.4 |
| IH-LR-CH-80HCE8187-K90X270 | K9,0x27,0 | 2,000 | 27 | 30.4 | 9 | 1.8 |
| IH-LR-CH-80HCE8187-K95X257 | K9,5×25,7 | 2,240 | 25.7 | 31.2 | 9.5 | 2 |
| IH-LR-CH-80HCE8187-K95X286 | K9,5×28,6 | 2,240 | 28.6 | 31.2 | 9.5 | 1.9 |
| IH-LR-CH-80HCE8187-K100X280 | K10,0x28,0 | 2,500 | 28 | 34 | 10 | 2.2 |
| IH-LR-CH-80HCE8187-K100X300 | K10,0x30,0 | 2,500 | 30 | 34 | 10 | 2.2 |
| IH-LR-CH-80HCE8187-K110X310 | K11,0x31,0 | 3,000 | 31 | 37.4 | 11 | 2.7 |
| IH-LR-CH-80HCE8187-K112X340 | K11,2×34,0 | 3,150 | 34 | 38 | 11.2 | 2.7 |
| IH-LR-CH-80HCE8187-K115X330 | K11,5×33,0 | 3,150 | 33 | 38.9 | 11.5 | 2.9 |
| IH-LR-CH-80HCE8187-K130X360 | K13,0x36,0 | 4,250 | 36 | 44.2 | 13 | 3.8 |
| IH-LR-CH-80HCE8187-K160X450 | K16,0x45,0 | 6,300 | 45 | 54.4 | 16 | 5.7 |
| IH-LR-CH-80HCE8187-K220X660 | K22,0x66,0 | 12,500 | 66 | 75 | 22 | 10.7 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Pitch — Thread pitch or link pitch, as the source heads it. H — Dimension H on the manufacturer dimension drawing. w — Dimension w on the manufacturer dimension drawing. Weight — Weight per metre, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 80 hoist chain come in?▾
What is the working load limit?▾
Can Grade 30, 43 or 70 chain be used for lifting?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
