Floating Ball Valve, 2 in × 206 F×M, 2,000 psi, Standard Service

The Floating Ball Valve, 2 in × 206 F×M, 2,000 psi, Standard Service is a ball — floating ball valve rated for 2,000 psi working pressure with 2 in 206 Female Weco Union inlet and 2 in 206 Male Weco Union outlet. Standard service rated for clean hydrocarbon and water-cut streams.

Construction

• Type: Ball — Floating
• Nominal size: 2 in
• Bore: Full Port
• Body material: Forged carbon steel (A105N)
• Trim material: 316SS ball + 17-4PH stem
• Seal / elastomer: RPTFE seats + FKM O-rings
• Inlet: 2 in 206 Female Weco Union
• Outlet: 2 in 206 Male Weco Union

Performance

Working pressure 2,000 psi (2K class). Manufactured to recognised oilfield flow-iron design standards (frac iron lineage). Service class: Standard.

Applications

• Cementing surface lines
• Kill-fluid circulation
• Low-pressure flow-back lines
• Mud-circulation skid manifolds

Compliance

• Recognised oilfield flow-iron design standards

How to order

Confirm (a) line pressure rating and pressure class, (b) inlet and outlet end-connection sizes / styles, (c) service class (sour vs standard), (d) bore preference (full vs reduced port), and (e) any temperature, fugitive-emissions, or fire-safe certification requirements. Indus quotes ex-Dubai with full mill test reports, API monogram traceability where applicable, and pre-shipment hydrostatic / shell test certificates.

Companion products

Pair with matched-pressure check valves, plug valves, and flow-iron unions of the same end-connection family. For wellhead service, also specify gate valves and surface safety valves of the equivalent API 6A pressure class. For frac applications, the 1502, 602, and 206 Weco unions are the most common matched standards.