Floating Ball Valve, 2 in × Butt-Weld Schedule 160, 5,000 psi, Sour Service
Ball ValvesEx-stock · delivery in 3 days
⚙
Floating Ball Valve, 2 in × Butt-Weld Schedule 160, 5,000 psi, Sour Service2 in × butt-weld Sch 160 floating ball valve, 5,000 psi sour-service per API 6D. Permanent in-line installation — no flange or union joint at the valve body.
Key features
- Valve Type: Ball — Floating
- Nominal Size: 2 in
- Working Pressure: 5000 psi
- End Connection (Inlet): 2 in Butt-Weld Schedule 160 (ASME B16.25)
- Service Class: Sour (NACE MR0175)
- Valve Type
- Ball — Floating
- Nominal Size
- 2 in
- Working Pressure
- 5000 psi
- Pressure Class
- 5K
- End Connection (Inlet)
- 2 in Butt-Weld Schedule 160 (ASME B16.25)
- Service Class
- Sour (NACE MR0175)
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer
Product description
The Floating Ball Valve, 2 in × Butt-Weld Schedule 160, 5,000 psi, Sour Service is a ball — floating ball valve rated for 5,000 psi working pressure with 2 in Butt-Weld Schedule 160 (ASME B16.25) inlet and 2 in Butt-Weld Schedule 160 (ASME B16.25) outlet. NACE MR0175 / ISO 15156 sour-service compliant — H₂S-rated trim and elastomers.
Construction
- Type: Ball — Floating
- Nominal size: 2 in
- Bore: Full Port
- Body material: Forged AISI 4130 — NACE-compliant
- Trim material: 316SS ball + 17-4PH stem
- Seal / elastomer: PEEK back-up + HNBR primary seals
- Inlet: 2 in Butt-Weld Schedule 160 (ASME B16.25)
- Outlet: 2 in Butt-Weld Schedule 160 (ASME B16.25)
Performance
Working pressure 5,000 psi (5K class). Manufactured to API 6D. Service class: Sour (NACE MR0175).
Applications
- Permanent in-line block valves (sour)
- Pipeline pig-trap header isolation
- 5K welded manifolds
- Sand-control surface trees (welded leg)
Compliance
- API 6D
- NACE MR0175 / ISO 15156 (sour-service)
How to order
Confirm (a) line pressure rating and pressure class, (b) inlet and outlet end-connection sizes / styles, (c) service class (sour vs standard), (d) bore preference (full vs reduced port), and (e) any temperature, fugitive-emissions, or fire-safe certification requirements. Indus quotes ex-Dubai with full mill test reports, API monogram traceability where applicable, and pre-shipment hydrostatic / shell test certificates.
Companion products
Pair with matched-pressure check valves, plug valves, and flow-iron unions of the same end-connection family. For wellhead service, also specify gate valves and surface safety valves of the equivalent API 6A pressure class. For frac applications, the 1502, 602, and 206 Weco unions are the most common matched standards.
Identification
| Parameter | Value |
|---|---|
| Valve Type | Ball — Floating |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 2 in |
| End Connection (Inlet) | 2 in Butt-Weld Schedule 160 (ASME B16.25) |
| End Connection (Outlet) | 2 in Butt-Weld Schedule 160 (ASME B16.25) |
| Bore Type | Full Port |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 5000 psi |
| Pressure Class | 5K |
| Service Class | Sour (NACE MR0175) |
Compliance
| Parameter | Value |
|---|---|
| API Specification | API 6D |
| PSL Class | N/A |
| PR Class | N/A |
Construction
| Parameter | Value |
|---|---|
| Body Material | Forged AISI 4130 — NACE-compliant |
| Trim Material | 316SS ball + 17-4PH stem |
| Seal / Elastomer Material | PEEK back-up + HNBR primary seals |
Shipping & lead time
Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in USA
What is the working pressure rating?▾
5,000 psi working pressure, 5K class. The valve is hydrotested at the standard 1.5× shell-test pressure and seat-tested per the applicable specification. The working pressure is fixed by both the body design and the end connection — the union or flange rating is the limiting factor at the joint.
What end connections does this valve use?▾
Inlet: 2 in Butt-Weld Schedule 160 (ASME B16.25). Outlet: 2 in Butt-Weld Schedule 160 (ASME B16.25). These are butt-weld ends per ASME B16.25 — for permanent in-line installation. Schedule (wall thickness) selected to match line pressure rating.
Is this valve suitable for sour-service (H₂S) wells?▾
Yes — this valve is fully NACE MR0175 / ISO 15156 compliant for sour-service exposure (H₂S-bearing streams). Body, stem, ball, and elastomers are selected to the NACE hardness and chemistry limits. Provide an inquiry data sheet listing partial pressures, temperature, and chloride levels and we will confirm trim suitability.
Is this a full-port or reduced-port ball?▾
Full Port. A full-port ball matches the bore ID through the body, allowing pigging and minimising pressure drop — preferred for frac iron and wellhead service.
What materials are used for the body, trim, and seals?▾
Body: Forged AISI 4130 — NACE-compliant. Trim (ball + stem): 316SS ball + 17-4PH stem. Seals / elastomers: PEEK back-up + HNBR primary seals. Alternative trim and seal materials (Inconel, F22, F51, FFKM, Devlon, RPTFE) are available on request for higher-temperature, sour, or chemical service.
What standards and certifications does this valve comply with?▾
API 6D, . Mill test reports per EN 10204 3.1 / 3.2 supplied with each unit. Plus NACE MR0175 / ISO 15156 sour-service compliance.
What is the lead time?▾
Common combinations are stocked or short-lead from OEM source — typical lead time 21 working days. Sour-service variants and unusual sizes / pressure classes ship 8–14 weeks ex-works depending on OEM build slots. Contact us with the full size + pressure + service spec for a firm delivery date.
Can this valve be integrated into a manifold skid or frac iron train?▾
Yes — Indus also supplies matched plug valves, check valves, swivel joints, integral fittings, and frac flow iron in the same Weco / flanged end-connection family. We can quote complete frac trees, manifold blocks, choke skids, and Christmas trees on request. Specify upstream and downstream connections, pressure class, and service class on the RFQ and we will return a complete bill of materials.
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
RELATED · OFTEN PAIRED WITH
Engineers viewing this also looked at
IH-OFV-BALL-3-1502FM-15K-STD-ANSON
IH-OFV-BALL-3-1502FM-15K-STD-ANSON
Trunnion Ball Valve, 3 in × 1502 F×M, 15,000 psi, Standard Service
Anson
IH-OFV-BALL-3-5M-FLG-5K-SOUR-WOM
IH-OFV-BALL-3-5M-FLG-5K-SOUR-WOM
Trunnion Ball Valve, 3-1/8 in × 5M Flanged, 5,000 psi, Sour Service
Worldwide Oilfield Machine
IH-OFV-BALL-4-1502FM-10K-SOUR-WOM
IH-OFV-BALL-4-1502FM-10K-SOUR-WOM
Trunnion Ball Valve, 4 in × 1502 F×M, 10,000 psi, Sour Service
Worldwide Oilfield Machine
IH-OFV-BALL-4-600RF-1480-SOUR-CAMERON
IH-OFV-BALL-4-600RF-1480-SOUR-CAMERON
Trunnion Ball Valve, 4 in × 600# RF, 1,480 psi, Sour Service
Cameron
IH-OFV-BALL-2-1502FM-10K-SOUR-WOM
IH-OFV-BALL-2-1502FM-10K-SOUR-WOM
Floating Ball Valve, 2 in × 1502 F×M, 10,000 psi, Sour Service
Worldwide Oilfield Machine
IH-OFV-BALL-2-1502FM-15K-STD-WOM
IH-OFV-BALL-2-1502FM-15K-STD-WOM
Trunnion Ball Valve, 2 in × 1502 F×M, 15,000 psi, Standard Service
Worldwide Oilfield Machine
IH-OFV-BALL-2-1502MF-10K-SOUR-ANSON
IH-OFV-BALL-2-1502MF-10K-SOUR-ANSON
Floating Ball Valve, 2 in × 1502 M×F, 10,000 psi, Sour Service
Anson
IH-OFV-BALL-2-150RF-285-STD-INDUS
IH-OFV-BALL-2-150RF-285-STD-INDUS
Floating Ball Valve, 2 in × 150# RF, 285 psi, Standard Service
Indus Hydraulics