Trunnion Ball Valve, 3 in × 1502 F×M, 15,000 psi, Standard Service
3 in × 1502 F×M trunnion-mounted ball valve, 15,000 psi standard-service rated. Larger 3-inch bore for high-rate frac discharge and cement-unit pump-off lines.
Key features
- Valve Type: Ball — Trunnion
- Nominal Size: 3 in
- Working Pressure: 15000 psi
- End Connection (Inlet): 3 in 1502 Female Weco Union
- Service Class: Standard
- Valve Type
- Ball — Trunnion
- Nominal Size
- 3 in
- Working Pressure
- 15000 psi
- Pressure Class
- 15K
- End Connection (Inlet)
- 3 in 1502 Female Weco Union
- Service Class
- Standard
Product description
The Trunnion Ball Valve, 3 in × 1502 F×M, 15,000 psi, Standard Service is a ball — trunnion ball valve rated for 15,000 psi working pressure with 3 in 1502 Female Weco Union inlet and 3 in 1502 Male Weco Union outlet. Standard service rated for clean hydrocarbon and water-cut streams.
Construction
- Type: Ball — Trunnion
- Nominal size: 3 in
- Bore: Full Port
- Body material: Forged alloy steel (4130)
- Trim material: 316SS ball + 17-4PH stem (trunnion-mounted)
- Seal / elastomer: RPTFE seats + FKM O-rings
- Inlet: 3 in 1502 Female Weco Union
- Outlet: 3 in 1502 Male Weco Union
Performance
Working pressure 15,000 psi (15K class). Manufactured to recognised oilfield flow-iron design standards (frac iron lineage). Service class: Standard.
Applications
- 3-inch frac discharge manifolds
- High-rate cement-unit pump-off
- 15K service trees (3-inch leg)
- Pressure-pumping iron — sweet wells
Compliance
- Recognised oilfield flow-iron design standards
How to order
Confirm (a) line pressure rating and pressure class, (b) inlet and outlet end-connection sizes / styles, (c) service class (sour vs standard), (d) bore preference (full vs reduced port), and (e) any temperature, fugitive-emissions, or fire-safe certification requirements. Indus quotes ex-Dubai with full mill test reports, API monogram traceability where applicable, and pre-shipment hydrostatic / shell test certificates.
Companion products
Pair with matched-pressure check valves, plug valves, and flow-iron unions of the same end-connection family. For wellhead service, also specify gate valves and surface safety valves of the equivalent API 6A pressure class. For frac applications, the 1502, 602, and 206 Weco unions are the most common matched standards.
Identification
| Parameter | Value |
|---|---|
| Valve Type | Ball — Trunnion |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 3 in |
| End Connection (Inlet) | 3 in 1502 Female Weco Union |
| End Connection (Outlet) | 3 in 1502 Male Weco Union |
| Bore Type | Full Port |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 15000 psi |
| Pressure Class | 15K |
| Service Class | Standard |
Compliance
| Parameter | Value |
|---|---|
| API Specification | Other |
| PSL Class | N/A |
| PR Class | N/A |
Construction
| Parameter | Value |
|---|---|
| Body Material | Forged alloy steel (4130) |
| Trim Material | 316SS ball + 17-4PH stem (trunnion-mounted) |
| Seal / Elastomer Material | RPTFE seats + FKM O-rings |
Shipping & lead time
What is the working pressure rating?▾
What end connections does this valve use?▾
Is this valve suitable for sour-service (H₂S) wells?▾
Is this a full-port or reduced-port ball?▾
What materials are used for the body, trim, and seals?▾
What standards and certifications does this valve comply with?▾
What is the lead time?▾
Can this valve be integrated into a manifold skid or frac iron train?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations