Drag Hose Coupling Ring Clamp
Drag Hose Coupling Ring Clamp — Hose clamp, sleeve or ferrule. Sizes 4", 5", 6", 8", & 10". Carbon Steel. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: Clamps, Sleeves & Ferrules
- Size Range: 4", 5", 6", 8", & 10"
- Coupling Family
- Clamps, Sleeves & Ferrules
Product description
The Drag Hose Coupling Ring Clamp is part of the Sunpool (Taiwan) Clamps, Sleeves & Ferrules range supplied by Indus Hydraulics, an authorised distributor in the UAE.
Specifications
- Coupling Family: Clamps, Sleeves & Ferrules
- Size Range: 4", 5", 6", 8", & 10"
- Materials Available: Carbon Steel
Manufacturer notes
- Connection ring clamp for Hy flow umbilical slurry fitting.
- Designed for connecting agriculture drag hose coupling.
- Can be easily removed or joined to the hose without specialist tools.
About the family
Clamps, sleeves and ferrules are the retention hardware that holds an industrial hose onto its fitting. The range covers crimp sleeves and ferrules for KC nipples and cam & groove shanks, double- and single-bolt clamps, interlocking clamps, safety clamps to EN 14420-3 / DIN 2817, sanitary tri-clamps for food and pharmaceutical lines, and segment clamps for Storz, frac-water and agricultural drag-hose couplings.
What it connects to
Crimp sleeves and ferrules are swaged permanently onto the hose over a matching shank and are selected by hose outside diameter, so the same nominal size is offered in several bore combinations. Bolt clamps, interlocking clamps and safety clamps are mechanical and can be released and re-made in the field. Sanitary tri-clamps close over the flanged ferrules of a hygienic line, and segment clamps close around the body of a Storz, frac-water or drag-hose coupling.
Where it is used
This hardware is what actually keeps an industrial hose on its fitting. It is specified alongside the coupling, not after it: the clamp or ferrule has to suit the hose construction, the working pressure and whether the assembly will ever be taken apart again. The range spans compressed-air and steam lines, chemical and bulk-transfer hose, food and pharmaceutical process lines, fire-service Storz connections, frac-water couplings and agricultural drag hose.
Selection and service notes
Match the retention to the duty. A crimped ferrule gives the highest pressure rating and the smallest outside profile but needs a crimping machine and cannot be re-used. A bolt or safety clamp can be built and rebuilt on site with hand tools, which is why EN 14420-3 / DIN 2817 assemblies remain standard on chemical and tanker hose. On hygienic lines the bolted and three-segment clamps carry more pressure than a single-hinge clamp and are the ones to specify where temperature cycling or PTFE gaskets are involved.
How to order
Specify (a) the size, (b) the body material if more than one is listed, and (c) any thread, tail or gasket variant on the RFQ. Indus Hydraulics quotes this range to order from Dubai; engineering will confirm the manufacturer part number against your application, and where a variant is listed as available on request we will confirm the lead time for it before you commit.
Sunpool sizes
Sunpool lists this part in 4", 5", 6", 8" and 10".
Sizes from Sunpool’s catalogue page for this part, checked 7 October 2026.
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 4", 5", 6", 8", & 10" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Carbon Steel |
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Clamps, Sleeves & Ferrules |
Shipping & lead time
Sizes & part numbers
5 sizes| Sunpool part no. | Nominal size |
|---|---|
| IH-CLP-DRAG-RING-400 | 4" |
| IH-CLP-DRAG-RING-500 | 5" |
| IH-CLP-DRAG-RING-600 | 6" |
| IH-CLP-DRAG-RING-800 | 8" |
| IH-CLP-DRAG-RING-1000 | 10" |
What is a hose clamp, sleeve or ferrule?▾
What sizes are available?▾
What materials are available?▾
Anything else worth knowing before ordering?▾
Lead time?▾
How do I choose between a crimped ferrule and a bolted clamp?▾
What does this clamp or ferrule fit?▾
Where is this hardware used?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this range
Failure analysis
Cracked cover: heat ageing against ozone attack
A cover covered in fine cracks has been cooked, or has been sitting in sunlight and still air. The crack pattern separates them, and only one of the two is fixed by moving the hose.
4 min read
Gulf operating conditions
Sand: the abrasive that gets between the hose and everything else
On a desert site the hose is not rubbing against a bracket. It is rubbing against a bracket through a layer of sand — and that changes both how fast the cover goes and what actually stops it.
3 min read
Failure analysis
Abrasion failure: finding the rub point before it finds you
The most preventable hose failure there is. A hose worn flat on one side has been telling you where it touches something for months — and the wear pattern points straight at the cause.
4 min read
Engineers viewing this also looked at
EN 14423 Clamp
Heavy Duty Ferrule
Ferrule for KC & Camlock
Sanitary Style Crimp Ferrule
Grooved Clamp
Interlocking Clamp
EN 14420-3 / DIN 2817 Safety Clamp
