Dixon Male Elbow

Dixon Male Elbow in steel: 2 part numbers.
Product description
Dixon Male Elbow in steel: 2 part numbers.
Specification
- Type: Male Elbow
- Material: Steel
- Pressure stated by the maker: 3,500 psi (241 bar)
- Thread Type: JIC, NPTF
- Part numbers: 2
Sizes and part numbers
The Sizes & Part Numbers tab lists every Dixon part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Dixon part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Thread Type | JIC, NPTF |
Shipping & lead time
Sizes & part numbers
2 sizes- Dixon Valve & Coupling part no.1240-12-10
- Description
- Male Elbow, 1-1/16-12 Inch Size, 45 Deg. M-SAE O Ring x 7/8 Inch-14 Male JIC
- Thread
- 1 1/16"-12 x 7/8"-14 JIC, NPTF (male)
- Working pressure (bar)
- 241
- Dixon Valve & Coupling part no.1238-08-10
- Description
- Elbow, 3/4 Inch-16, 90 Deg. Male SAE O-Ring Boss x 7/8 Inch-14 M-JIC
- Thread
- 3/4"-16 x 7/8"-14 JIC, NPTF (male)
- Working pressure (bar)
- 241
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Dixon Male Elbow used for?▾
Which part numbers are in the Dixon Male Elbow range?▾
What sizes does the Dixon Male Elbow come in?▾
Which Dixon Male Elbow do I need for my hose and port?▾
What pressure is the Dixon Male Elbow rated for?▾
What material and finish does the Dixon Male Elbow have?▾
Which standard does the Dixon Male Elbow follow?▾
What does the Dixon Male Elbow connect to?▾
How do I fit and tighten the Dixon Male Elbow?▾
How does the Dixon Male Elbow differ from the Dixon Flareless Bite Male Tube x Male NPTF 90 Degree Elbow Adapters?▾
Where is the Dixon Male Elbow made, and can you export it from Dubai?▾
Do you have the Dixon Male Elbow in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read
Assembly, crimping & certification
JIC, ORFS and NPT hose fittings: inch-thread hose ends, drop lengths and how they seal
Most hose assemblies on American and many Asian machines end in one of three inch-thread connections: a JIC 37° swivel, an ORFS swivel with an O-ring in the face, or a pipe thread. Each has its standard (ISO 12151-5, -1 and SAE J516), its seal and its trap — a 45° SAE flare that threads onto a JIC and leaks, an NPSM swivel on a nipple with no 30° seat. The inch hose-end range, including compact and long-drop elbows, and how to order an assembly with two elbows.
4 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read








