Dixon Flat Face Male x Male NPTF 90 Degree Elbows

Dixon Flat Face Male x Male NPTF 90 Degree Elbows in steel: 5 part numbers.
Product description
Dixon Flat Face Male x Male NPTF 90 Degree Elbows in steel: 5 part numbers.
Specification
- Type: Elbow, 90 Degree
- Material: Steel
- Pressure stated by the maker: 2,000 to 5,000 psi (138 to 345 bar), by size
- Thread Type: Flat Face NPTF
- Part numbers: 5
Sizes and part numbers
The Sizes & Part Numbers tab lists every Dixon part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Dixon part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Thread Type | Flat Face NPTF |
Shipping & lead time
Sizes & part numbers
5 sizes- Dixon Valve & Coupling part no.FS2501-16-16
- Description
- Male Flat Face x MNPTF 90 Deg. Elbow, Flat Face x NPTF Thread
- Thread
- 1 7/16"-12 x 1"-11.5 Flat Face NPTF (male)
- Working pressure (bar)
- 138
- Dixon Valve & Coupling part no.FS2501-12-12
- Description
- Male Flat Face x MNPTF 90 Deg. Elbow, Flat Face x NPTF Thread
- Thread
- 1 3/16"-12 x 3/4"-14 Flat Face NPTF (male)
- Working pressure (bar)
- 172
- Dixon Valve & Coupling part no.FS2501-8-8
- Description
- Male Flat Face x MNPTF 90 Deg. Elbow, Flat Face x NPTF Thread
- Thread
- 13/16"-16 x 1/2"-14 Flat Face NPTF (male)
- Working pressure (bar)
- 207
- Dixon Valve & Coupling part no.FS2501-6-6
- Description
- Male Flat Face x MNPTF 90 Deg. Elbow, Flat Face x NPTF Thread
- Thread
- 11/16"-16 x 3/8"-18 Flat Face NPTF (male)
- Working pressure (bar)
- 276
- Dixon Valve & Coupling part no.FS2501-4-4
- Description
- Male Flat Face x MNPTF 90 Deg. Elbow, Flat Face x NPTF Thread
- Thread
- 9/16"-18 x 1/4"-18 Flat Face NPTF (male)
- Working pressure (bar)
- 345
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Dixon Flat Face Male x Male NPTF 90 Degree Elbows and what hose does it fit?▾
How do I read the part numbers on the Dixon Flat Face Male x Male NPTF 90 Degree Elbows, such as FS2501-16-16?▾
What sizes and part numbers are listed for the Dixon Flat Face Male x Male NPTF 90 Degree Elbows?▾
What working pressure does the Dixon Flat Face Male x Male NPTF 90 Degree Elbows have?▾
What is the Dixon Flat Face Male x Male NPTF 90 Degree Elbows made of?▾
What documents or standards should I ask for with the Dixon Flat Face Male x Male NPTF 90 Degree Elbows?▾
What do I connect the Dixon Flat Face Male x Male NPTF 90 Degree Elbows to?▾
How is the Dixon Flat Face Male x Male NPTF 90 Degree Elbows installed on a hose?▾
Where is the Dixon Flat Face Male x Male NPTF 90 Degree Elbows used?▾
When would I choose the Dixon Flat Face Male x Male NPTF 90 Degree Elbows over the Dixon Flat Face Male x Female Swivel Nut 90 Degree Elbows?▾
Where is the Dixon Flat Face Male x Male NPTF 90 Degree Elbows made and how does it ship from Dubai?▾
Do you stock the Dixon Flat Face Male x Male NPTF 90 Degree Elbows in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read
Failure analysis
Reading a weeping joint: where the oil comes from tells you why
A weep is evidence before it is a fault. Where the oil appears — at the seat, down the thread, under the nut — narrows the cause to one of four things.
3 min read
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read








