
Cast steel wedge gate valves to API 600 and ASME B16.34: NPS 2" to 42" to API 600 (larger sizes to ASME B16.34), Class 150 to 2500, bolted bonnet, flexible wedge, raised-face, ring-joint or butt-weld ends, with handwheel, gear operator or actuator.
Key features
- Valve type: Gate valve, flexible wedge
- Construction: Bolted bonnet, outside screw and yoke, rising stem
- Design standard: API 600, ASME B16.34
- Size range: NPS 2" to 88" (DN50 to DN2200)
- Pressure class: ASME Class 150 to 2500
- Body material: Carbon steel, low-temperature steel, alloy steel, stainless steel, duplex
- End connections: RF or RTJ flanged to ASME B16.5; butt-weld to ASME B16.25
- Operation: Handwheel, gear operator, electric, pneumatic or hydraulic actuator
- Valve type
- Gate valve, flexible wedge
- Design standard
- API 600, ASME B16.34
- Pressure class
- ASME Class 150 to 2500
- End connections
- RF or RTJ flanged to ASME B16.5; butt-weld to ASME B16.25
- Operation
- Handwheel, gear operator, electric, pneumatic or hydraulic actuator
Product description
The workhorse isolation valve of refinery, petrochemical and gas-plant piping. A cast steel body and bolted bonnet carry an outside-screw-and-yoke rising stem and a flexible wedge that seals on both seats, tolerating the thermal and piping loads that would bind a solid wedge.
Gate valves are isolation valves: they run fully open, with the gate clear of the flow path and a low pressure drop, or fully closed. They are not used to throttle, because a part-open gate erodes the seats and vibrates.
Construction
- Flexible wedge (solid wedge on request), renewable seat rings with hardfaced sealing faces
- Bolted bonnet with spiral-wound or ring-joint gasket; pressure-seal bonnet versions are listed separately
- Outside screw and yoke, rising stem and non-rising handwheel; backseat lets the packing be renewed under pressure
- Low-emission packing to ISO 15848 available
Sizes and ratings
Published range: NPS 2" to 88" (DN50 to DN2200); API 600 covers NPS 1 to 42, so larger sizes are built to ASME B16.34, ASME Class 150 to 2500, in carbon steel, low-temperature steel, alloy steel, stainless steel, duplex. End connections: RF or RTJ flanged to ASME B16.5; butt-weld to ASME B16.25. Operation: handwheel, gear operator, electric, pneumatic or hydraulic actuator.
The size table below lists 154 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.
Testing and documents
Shell, backseat and seat tests to API 598, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Cast steel gate valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other gate valves in the range, for comparison when the duty is not settled yet: API 603 Stainless Steel Gate, Globe and Check Valves, Pressure Seal Gate, Globe and Check Valves, Bellows Seal Gate and Globe Valves, Parallel Slide Gate Valve.
Identification
| Parameter | Value |
|---|---|
| Valve type | Gate valve, flexible wedge |
| Construction | Bolted bonnet, outside screw and yoke, rising stem |
Standards
| Parameter | Value |
|---|---|
| Design standard | API 600, ASME B16.34 |
| Face-to-face / end-to-end | ASME B16.10 |
| Pressure testing | Shell, backseat and seat tests to API 598 |
| Fugitive emissions | Low-emission packing to ISO 15848 on request |
Range
| Parameter | Value |
|---|---|
| Size range | NPS 2" to 88" (DN50 to DN2200) |
| Pressure class | ASME Class 150 to 2500 |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, low-temperature steel, alloy steel, stainless steel, duplex |
| Seat and trim | API 600 trim numbers; hardfaced seats |
Construction
| Parameter | Value |
|---|---|
| End connections | RF or RTJ flanged to ASME B16.5; butt-weld to ASME B16.25 |
| Operation | Handwheel, gear operator, electric, pneumatic or hydraulic actuator |
Application
| Parameter | Value |
|---|---|
| Typical service | Oil and gas, refining, petrochemical, power, water |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the pressure-test record |
Shipping & lead time
Sizes & part numbers
154 sizes- Indus part no.IH-PV-GTC-150-0200
- Size
- 2"
- DN
- 50
- Class
- Class 150
- L (RF) (mm)
- 178
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 216
- H (mm)
- 316
- H1 (mm)
- —
- W (mm)
- 200
- W1 (mm)
- —
- Weight (flanged) (kg)
- 18
- Weight (BW) (kg)
- 14
- Indus part no.IH-PV-GTC-150-0300
- Size
- 3"
- DN
- 80
- Class
- Class 150
- L (RF) (mm)
- 203
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 282
- H (mm)
- 361
- H1 (mm)
- —
- W (mm)
- 250
- W1 (mm)
- —
- Weight (flanged) (kg)
- 31
- Weight (BW) (kg)
- 27
- Indus part no.IH-PV-GTC-150-0400
- Size
- 4"
- DN
- 100
- Class
- Class 150
- L (RF) (mm)
- 229
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 305
- H (mm)
- 432
- H1 (mm)
- —
- W (mm)
- 250
- W1 (mm)
- —
- Weight (flanged) (kg)
- 45
- Weight (BW) (kg)
- 38
- Indus part no.IH-PV-GTC-150-0600
- Size
- 6"
- DN
- 150
- Class
- Class 150
- L (RF) (mm)
- 267
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 403
- H (mm)
- 587
- H1 (mm)
- —
- W (mm)
- 300
- W1 (mm)
- —
- Weight (flanged) (kg)
- 73
- Weight (BW) (kg)
- 77
- Indus part no.IH-PV-GTC-150-0800
- Size
- 8"
- DN
- 200
- Class
- Class 150
- L (RF) (mm)
- 292
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 419
- H (mm)
- 733
- H1 (mm)
- —
- W (mm)
- 350
- W1 (mm)
- —
- Weight (flanged) (kg)
- 109
- Weight (BW) (kg)
- 102
- Indus part no.IH-PV-GTC-150-1000
- Size
- 10"
- DN
- 250
- Class
- Class 150
- L (RF) (mm)
- 330
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 457
- H (mm)
- 871
- H1 (mm)
- —
- W (mm)
- 400
- W1 (mm)
- —
- Weight (flanged) (kg)
- 175
- Weight (BW) (kg)
- 155
- Indus part no.IH-PV-GTC-150-1200
- Size
- 12"
- DN
- 300
- Class
- Class 150
- L (RF) (mm)
- 356
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 502
- H (mm)
- 1022
- H1 (mm)
- 1367
- W (mm)
- 450
- W1 (mm)
- 305
- Weight (flanged) (kg)
- 261
- Weight (BW) (kg)
- 230
- Indus part no.IH-PV-GTC-150-1400
- Size
- 14"
- DN
- 350
- Class
- Class 150
- L (RF) (mm)
- 381
- L (RTJ) (mm)
- —
- L (BW) (mm)
- 572
- H (mm)
- —
- H1 (mm)
- 1524
- W (mm)
- —
- W1 (mm)
- 460
- Weight (flanged) (kg)
- 348
- Weight (BW) (kg)
- 318
Show all 154 sizesShow fewer sizes
Size — Nominal pipe size (NPS), as published. DN — Nominal diameter (DN), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. L (RF) — Face-to-face length with raised-face flanged ends, as published. L (RTJ) — Face-to-face length with ring-type-joint flanged ends, as published. L (BW) — End-to-end length with butt-weld ends, as published. H — Dimension H on the manufacturer dimension drawing. H1 — Dimension H1 on the manufacturer dimension drawing. W — Dimension W on the manufacturer dimension drawing. W1 — Dimension W1 on the manufacturer dimension drawing. Weight (flanged) — Weight with flanged ends, as published. Weight (BW) — Weight with butt-weld ends, as published. Ask us for the dimension drawing if you need it stamped.
Lengths are in millimetres and weights in kilograms, as published for each size and class. The end connection, trim, seat and operator you order can change the length and weight, so we confirm the general arrangement drawing with the quotation.
What is the API 600 cast steel gate valve used for?▾
How do I read the API 600 cast steel gate valve part numbers such as IH-PV-GTC-600-2000?▾
What sizes and classes is the API 600 cast steel gate valve available in?▾
What pressure and temperature can the API 600 cast steel gate valve take?▾
What materials is the API 600 cast steel gate valve made in?▾
What tests and documents come with the API 600 cast steel gate valve?▾
How is the API 600 cast steel gate valve operated, and what end connections does it have?▾
API 600 cast steel gate valve: Flexible wedge or solid wedge?▾
API 600 cast steel gate valve: Which body materials are available?▾
How does the API 600 cast steel gate valve compare with the API 602 forged steel gate valve?▾
Where is the API 600 cast steel gate valve supplied from?▾
Is the API 600 cast steel gate valve in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








