Skip to content

Pressure Seal Gate, Globe and Check Valves

Gate ValvesEx-stock · delivery in 3 days
Pressure seal gate valve with gear operator, yoke and butt-weld ends for high-pressure steam service
VIEW 01·Pressure seal gate valve with gear operator, yoke and butt-weld ends for high-pressure steam service

Pressure seal gate, globe and check valves to ASME B16.34: NPS 2" to 40", Class 600 to 4500, line pressure loads the bonnet seal, for high-pressure, high-temperature steam and process service.

Key features

  • Valve type: Gate, globe and swing check valves
  • Construction: Pressure-seal bonnet
  • Design standard: ASME B16.34
  • Size range: NPS 2" to 40" (DN50 to DN1000)
  • Pressure class: ASME Class 600 to 4500
  • Body material: Carbon steel, alloy steel (WC6, WC9, C12A), low-temperature steel, duplex, nickel alloys
  • End connections: Butt-weld; RF or RTJ flanged
  • Operation: Handwheel, gear operator, electric, pneumatic or hydraulic actuator
Valve type
Gate, globe and swing check valves
Design standard
ASME B16.34
Pressure class
ASME Class 600 to 4500
End connections
Butt-weld; RF or RTJ flanged
Operation
Handwheel, gear operator, electric, pneumatic or hydraulic actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

At high pressure a bolted bonnet needs very heavy bolting. In a pressure-seal valve the bonnet sits inside the body and line pressure drives it against a wedge-shaped seal ring, so the seal tightens as pressure rises. The valve is lighter and more compact for its class, and the body-bonnet joint stays tight through thermal cycles.

Gate valves are isolation valves: they run fully open, with the gate clear of the flow path and a low pressure drop, or fully closed. They are not used to throttle, because a part-open gate erodes the seats and vibrates.

Construction

  • Pressure-seal bonnet: the seal tightens as pressure rises
  • Gate (flexible wedge), globe and swing check versions
  • Butt-weld ends for steam and high-temperature lines; flanged on request
  • Gear operator or actuator for the larger sizes

Sizes and ratings

Published range: NPS 2" to 40" (DN50 to DN1000), ASME Class 600 to 4500, in carbon steel, alloy steel (wc6, wc9, c12a), low-temperature steel, duplex, nickel alloys. End connections: Butt-weld; RF or RTJ flanged. Operation: handwheel, gear operator, electric, pneumatic or hydraulic actuator.

The size table below lists 166 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.

Testing and documents

Shell, backseat and seat tests to API 598, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Pressure seal valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other gate valves in the range, for comparison when the duty is not settled yet: Bellows Seal Gate and Globe Valves, Parallel Slide Gate Valve, Through Conduit Slab Gate Valve, API 6D, Expanding Gate Valve, API 6D.

Identification

ParameterValue
Valve typeGate, globe and swing check valves
ConstructionPressure-seal bonnet

Standards

ParameterValue
Design standardASME B16.34
Face-to-face / end-to-endASME B16.10
Pressure testingShell, backseat and seat tests to API 598

Range

ParameterValue
Size rangeNPS 2" to 40" (DN50 to DN1000)
Pressure classASME Class 600 to 4500

Materials

ParameterValue
Body materialCarbon steel, alloy steel (WC6, WC9, C12A), low-temperature steel, duplex, nickel alloys
Seat and trimHardfaced seats

Construction

ParameterValue
End connectionsButt-weld; RF or RTJ flanged
OperationHandwheel, gear operator, electric, pneumatic or hydraulic actuator

Application

ParameterValue
Typical servicePower-plant steam and feedwater, high-pressure process

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the pressure-test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at