Skip to content

Through Conduit Slab Gate Valve, API 6D

Gate ValvesEx-stock · delivery in 3 days
Through conduit slab gate valves with handwheels, three units shown, flanged pipeline valves
VIEW 01·Through conduit slab gate valves with handwheels, three units shown, flanged pipeline valves

Through conduit slab gate valves to API 6D: NPS 2" to 48", Class 150 to 2500, full smooth bore for pigging, floating seats and soft or metal seals, for oil and gas pipelines.

Key features

  • Valve type: Gate valve, through-conduit slab
  • Construction: One-piece slab, floating seats, bolted bonnet
  • Design standard: API 6D, ASME B16.34
  • Size range: NPS 2" to 48" (DN50 to DN1200)
  • Pressure class: ASME Class 150 to 2500
  • Body material: Carbon steel, stainless steel, alloy steel, duplex
  • End connections: RF, RTJ flanged to ASME B16.5 / B16.47; butt-weld
  • Operation: Handwheel, gear operator, electric, pneumatic or hydraulic actuator
Valve type
Gate valve, through-conduit slab
Design standard
API 6D, ASME B16.34
Pressure class
ASME Class 150 to 2500
End connections
RF, RTJ flanged to ASME B16.5 / B16.47; butt-weld
Operation
Handwheel, gear operator, electric, pneumatic or hydraulic actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pipeline gate valve whose one-piece slab carries a bore the same size as the pipe. When open, the bore lines up with the pipe and leaves no cavity for solids to collect in, so pigs pass straight through and slurries and waxy crude do not foul it.

Gate valves are isolation valves: they run fully open, with the gate clear of the flow path and a low pressure drop, or fully closed. They are not used to throttle, because a part-open gate erodes the seats and vibrates.

Construction

  • One-piece slab with full port; floating seats seal downstream
  • Soft-sealing (RPTFE insert) or metal-to-metal seats
  • Body cavity relief, sealant injection and drain fittings
  • Handwheel, gear operator or actuator; stem extension on request

Sizes and ratings

Published range: NPS 2" to 48" (DN50 to DN1200), ASME Class 150 to 2500, in carbon steel, stainless steel, alloy steel, duplex. End connections: RF, RTJ flanged to ASME B16.5 / B16.47; butt-weld. Operation: handwheel, gear operator, electric, pneumatic or hydraulic actuator.

The full dimension and weight table for each class is issued with the quotation, together with the general arrangement drawing for the end connection and operator you choose.

Testing and documents

Hydrostatic shell and seat tests to API 6D, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Slab gate valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other gate valves in the range, for comparison when the duty is not settled yet: Expanding Gate Valve, API 6D, Forged Steel Gate Valve, API 602, Large Size Forged Gate, Globe and Check Valves, NPS 2" and up, Forged Pressure Seal Gate, Globe and Check Valves.

Identification

ParameterValue
Valve typeGate valve, through-conduit slab
ConstructionOne-piece slab, floating seats, bolted bonnet

Standards

ParameterValue
Design standardAPI 6D, ASME B16.34
Pressure testingHydrostatic shell and seat tests to API 6D

Range

ParameterValue
Size rangeNPS 2" to 48" (DN50 to DN1200)
Pressure classASME Class 150 to 2500

Materials

ParameterValue
Body materialCarbon steel, stainless steel, alloy steel, duplex
Seat and trimSoft-insert or metal-to-metal seats

Construction

ParameterValue
End connectionsRF, RTJ flanged to ASME B16.5 / B16.47; butt-weld
OperationHandwheel, gear operator, electric, pneumatic or hydraulic actuator

Application

ParameterValue
Typical serviceOil and gas pipelines, piggable lines, slurry

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the pressure-test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at