Skip to content

Stainless Steel Gate, Globe and Check Valves, API 603 Gate

Gate ValvesEx-stock · delivery in 3 days
Stainless steel API 603 gate valve with gear operator, bolted bonnet and flanged ends
VIEW 01·Stainless steel API 603 gate valve with gear operator, bolted bonnet and flanged ends

Light-wall stainless steel gate valves to API 603, with globe and check valves to ASME B16.34: NPS 1/2" to 24", Class 150 to 600, for corrosive process, chemical and offshore service.

Key features

  • Valve type: Gate, globe and swing check valves
  • Construction: Bolted bonnet or cover; light-wall stainless body
  • Design standard: API 603, ASME B16.34
  • Size range: NPS 1/2" to 24" (DN15 to DN600)
  • Pressure class: ASME Class 150 to 600
  • Body material: Stainless steel (CF8, CF8M, CF3, CF3M), duplex, nickel alloys
  • End connections: RF flanged; butt-weld; threaded or socket-weld in small sizes
  • Operation: Handwheel, gear operator or actuator
Valve type
Gate, globe and swing check valves
Design standard
API 603, ASME B16.34
Pressure class
ASME Class 150 to 600
End connections
RF flanged; butt-weld; threaded or socket-weld in small sizes
Operation
Handwheel, gear operator or actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Corrosion-resistant valves with the wall thickness of ASME B16.34 rather than the heavier API 600 body, so they weigh and cost less while carrying the same pressure-temperature rating. Gate, globe and swing check versions share the same materials and end connections; the gate valve is built to API 603, the globe and check valves to ASME B16.34.

Gate valves are isolation valves: they run fully open, with the gate clear of the flow path and a low pressure drop, or fully closed. They are not used to throttle, because a part-open gate erodes the seats and vibrates.

Construction

  • Cast austenitic stainless bodies (CF8, CF8M, CF3, CF3M); duplex and nickel alloys on request
  • Gate: flexible wedge, bolted bonnet, outside screw and yoke
  • Globe: bolted bonnet, swivel disc; check: swing disc, bolted cover
  • Flanged or butt-weld ends; threaded and socket-weld in the small sizes

Sizes and ratings

Published range: NPS 1/2" to 24" (DN15 to DN600), ASME Class 150 to 600, in stainless steel (cf8, cf8m, cf3, cf3m), duplex, nickel alloys. End connections: RF flanged; butt-weld; threaded or socket-weld in small sizes. Operation: handwheel, gear operator or actuator.

The full dimension and weight table for each class is issued with the quotation, together with the general arrangement drawing for the end connection and operator you choose.

Testing and documents

Shell, backseat and seat tests to API 598, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Stainless steel valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other gate valves in the range, for comparison when the duty is not settled yet: Pressure Seal Gate, Globe and Check Valves, Bellows Seal Gate and Globe Valves, Parallel Slide Gate Valve, Through Conduit Slab Gate Valve, API 6D.

Identification

ParameterValue
Valve typeGate, globe and swing check valves
ConstructionBolted bonnet or cover; light-wall stainless body

Standards

ParameterValue
Design standardAPI 603, ASME B16.34
Face-to-face / end-to-endASME B16.10
Pressure testingShell, backseat and seat tests to API 598

Range

ParameterValue
Size rangeNPS 1/2" to 24" (DN15 to DN600)
Pressure classASME Class 150 to 600

Materials

ParameterValue
Body materialStainless steel (CF8, CF8M, CF3, CF3M), duplex, nickel alloys
Seat and trimStainless trim, hardfaced seats on request

Construction

ParameterValue
End connectionsRF flanged; butt-weld; threaded or socket-weld in small sizes
OperationHandwheel, gear operator or actuator

Application

ParameterValue
Typical serviceChemical, offshore, desalination and corrosive process

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the pressure-test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at