Bijur Delimon TM-1 Automatic Oil Lubricators

Bijur Delimon TM-1 Automatic Oil Lubricators: 45 part numbers, for SLR systems; oil; 4L, 1L, 1 pint reservoirs. The TM-1 is Bijur's motor-driven, spring-discharge piston oiler for single-line resistance (SLR) systems on small and medium machine tools. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Electric lubrication pump
- Series: Bijur Delimon TM-1 Automatic Oil Lubricators
- Drive: Electric motor
- Lubrication system: SLR
- Lubricant: Oil
- Reservoir: 4L, 1L, 1 pint
- Output: 0.2-1cc/cycle
- Max pressure: 20-50 psi (1.3-3.4 bar)
- Supply voltage: 115VAC, 230VAC, 115/230VAC
- Product type
- Electric lubrication pump
- Drive
- Electric motor
- Lubrication system
- SLR
- Lubricant
- Oil
Product description
The TM-1 is Bijur's motor-driven, spring-discharge piston oiler for single-line resistance (SLR) systems on small and medium machine tools.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
A gear-reduction motor lifts the piston and releases it on a fixed cycle; the spring drives the shot of oil into the line, where meter units proportion it to each bearing or slide. The cycle time is set by the motor gearing — the rows list it — and reservoirs are 1 or 4 litres, with level switch and pressure switch options.
Range
45 listed part numbers — systems SLR; lubricants Oil; reservoirs 4L, 1L, 1 pint; supply 115VAC, 230VAC, 115/230VAC; output 0.2-1cc/cycle; maximum pressure 20-50 psi (1.3-3.4 bar). The size table gives each part number's data.
Row descriptions are Bijur Delimon's own: LS / LLS level or low-level switch, HLS high-level switch, PG pressure gauge, PS pressure switch, CNTL controller, P&M pump and motor, SLR single-line resistance, PDI positive-displacement injector, PROG progressive. The columns give each part number's published data.
Where it is used
- lathes, mills and machining centres
- grinders and slide-way lubrication
- replacement of an existing TM-1
Choosing the pump
Start from the distribution system the pump has to drive — SLR meter units, PDI injectors, progressive dividers, Dualine valves or direct multi-line feeds — then the lubricant: oil grade in cSt, or grease NLGI class (fluid grease for PDI). Size the reservoir for the refill interval you want, match the supply voltage and enclosure to the machine, and decide how the cycle is controlled: an integral timer or controller, an external controller, or the machine PLC. Level and pressure switches let the control system prove each cycle.
Complete systems
A pump is one part of a lubrication system. With it we supply the Bijur Delimon distribution — meter units, injectors, divider valves or Dualine valves — and the tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Spare parts
Genuine Bijur Delimon service parts and kits for this range are listed by part number on Bijur Delimon TM-1 Lubricator Service Parts.
Documents
Bijur Delimon's datasheets for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Electric lubrication pump |
| Series | Bijur Delimon TM-1 Automatic Oil Lubricators |
| Drive | Electric motor |
Application
| Parameter | Value |
|---|---|
| Lubrication system | SLR |
| Lubricant | Oil |
| Viscosity / NLGI range | 150-8000 SSU |
Performance
| Parameter | Value |
|---|---|
| Reservoir | 4L, 1L, 1 pint |
| Output | 0.2-1cc/cycle |
| Max pressure | 20-50 psi (1.3-3.4 bar) |
Electrical
| Parameter | Value |
|---|---|
| Supply voltage | 115VAC, 230VAC, 115/230VAC |
| Monitoring | pressure switch, low-level switch |
Connections
| Parameter | Value |
|---|---|
| Outlet thread | 5/16-24, BARBED FOR 3/16ID HOSE, 1/4TUBE |
| Fill connection | CAP, FILL CAP |
Environment
| Parameter | Value |
|---|---|
| Operating temperature | 5°C-40°C |
| Approvals | CE |
Ordering
| Parameter | Value |
|---|---|
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Shipping & lead time
Sizes & part numbers
45 sizes- Indus part no.IH-BD-15180
- Description
- 15180 — LUB TM1 W/48V 8RPH
- System
- —
- Lubricant
- —
- Reservoir
- —
- Supply
- —
- Output
- —
- Max pressure
- —
- Outlet
- —
- Monitoring
- —
- Indus part no.IH-BD-17204
- Description
- 17204 — TM1 4L 115VAC SLR PS 2.5MIN
- System
- SLR
- Lubricant
- Oil 150-8000 SSU
- Reservoir
- 4L
- Supply
- 115VAC, 1 ph, 50/60 Hz
- Output
- 0.2-1cc/cycle
- Max pressure
- 20-50 psi (1.3-3.4 bar)
- Outlet
- 5/16-24
- Monitoring
- pressure switch
- Indus part no.IH-BD-20439
- Description
- 20439 — TM1 1L 115VAC LS 5MIN
- System
- SLR
- Lubricant
- Oil 150-8000 SSU
- Reservoir
- 1L
- Supply
- 115VAC, 1 ph, 50/60 Hz
- Output
- 0.2-1cc/cycle
- Max pressure
- 20-50 psi (1.3-3.4 bar)
- Outlet
- 5/16-24
- Monitoring
- low-level switch
- Indus part no.IH-BD-23948
- Description
- 23948 — TM1 1L 115VAC SLR 12.5MIN
- System
- SLR
- Lubricant
- Oil 150-8000 SSU
- Reservoir
- 1L
- Supply
- 115VAC, 1 ph, 50/60 Hz
- Output
- 0.2-1cc/cycle
- Max pressure
- 20-50 psi (1.3-3.4 bar)
- Outlet
- 5/16-24
- Monitoring
- low-level switch
- Indus part no.IH-BD-34818
- Description
- 34818 — TM1 1L 115VAC SLR 12SEC LS
- System
- SLR
- Lubricant
- Oil 150-8000 SSU
- Reservoir
- 1L
- Supply
- 115VAC, 1 ph, 50/60 Hz
- Output
- 0.2-1cc/cycle
- Max pressure
- 20-50 psi (1.3-3.4 bar)
- Outlet
- BARBED FOR 3/16ID HOSE
- Monitoring
- low-level switch
- Indus part no.IH-BD-34818-1
- Description
- 34818-1 — TM1 1L 230VAC SLR 12SEC LS
- System
- SLR
- Lubricant
- Oil 150-8000 SSU
- Reservoir
- 1L
- Supply
- 230VAC, 1 ph, 50/60 Hz
- Output
- 0.2-1cc/cycle
- Max pressure
- 20-50 psi (1.3-3.4 bar)
- Outlet
- BARBED FOR 3/16ID HOSE
- Monitoring
- low-level switch
- Indus part no.IH-BD-34983
- Description
- 34983 — TM1 4L 115VAC SLR 12SEC LS
- System
- SLR
- Lubricant
- Oil 150-8000 SSU
- Reservoir
- 4L
- Supply
- 115VAC, 1 ph, 50/60 Hz
- Output
- 0.2-1cc/cycle
- Max pressure
- 20-50 psi (1.3-3.4 bar)
- Outlet
- BARBED FOR 3/16ID HOSE
- Monitoring
- —
- Indus part no.IH-BD-34983-1
- Description
- 34983-1 — TM1 4L 230VAC SLR 12SEC LS
- System
- SLR
- Lubricant
- Oil 150-8000 SSU
- Reservoir
- 4L
- Supply
- 230VAC, 1 ph, 50/60 Hz
- Output
- 0.2-1cc/cycle
- Max pressure
- 20-50 psi (1.3-3.4 bar)
- Outlet
- BARBED FOR 3/16ID HOSE
- Monitoring
- —
Show all 45 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. System — Lubrication system the pump feeds — SLR (single-line resistance), PDI (positive-displacement injector), progressive, Dualine or multi-line — as published. Lubricant — Oil or grease, with the viscosity or NLGI range the pump handles, as published. Reservoir — Reservoir capacity in the unit the maker publishes it. Supply — Motor or control voltage, phase and frequency, as published. Output — Lubricant output per cycle or per minute, as published. Max pressure — Maximum pressure as the maker publishes it, in psi and bar. Outlet — Outlet port thread, as published. Monitoring — Level switch, pressure switch, gauge or controller the part number includes, as published.
What are Bijur Delimon TM-1 Automatic Oil Lubricators?▾
What does an Indus part number such as IH-BD-15180 mean for Bijur Delimon TM-1 Automatic Oil Lubricators?▾
Which part numbers and versions does Bijur Delimon TM-1 Automatic Oil Lubricators cover?▾
How do I choose the right TM-1 Automatic Oil Lubricators for my machine?▾
What pressure, output and reservoir ratings do Bijur Delimon TM-1 Automatic Oil Lubricators have?▾
What is a SLR lubrication system, and is Bijur Delimon TM-1 Automatic Oil Lubricators used in one?▾
Which lubricants and viscosities can Bijur Delimon TM-1 Automatic Oil Lubricators handle?▾
What approvals and enclosure rating do Bijur Delimon TM-1 Automatic Oil Lubricators have?▾
Can Bijur Delimon TM-1 Automatic Oil Lubricators be supplied as part of a complete lubrication system?▾
Do you supply spare parts and service kits for Bijur Delimon TM-1 Automatic Oil Lubricators?▾
How do Bijur Delimon TM-1 Automatic Oil Lubricators differ from Bijur Delimon TM-5 and TMD-5 Automatic Oil Lubricators?▾
Do you keep Bijur Delimon TM-1 Automatic Oil Lubricators in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








