Bijur Delimon WS-E Chain Lubrication Units

Bijur Delimon WS-E Chain Lubrication Units: configured to order (120 order codes). The WS-E is a gear-wheel pump unit for oiling chains, joints, rollers and hinges, and for built-in parts such as an engine crankshaft. From Indus Hydraulics, authorised Bijur Delimon distributor for the Middle East, supplied direct from the manufacturer.
Key features
- Product type: Electric lubrication pump
- Series: Bijur Delimon WS-E Chain Lubrication Units
- Drive: Electric motor
- Reservoir: 4 Liter Metal; 12 Liter Aluminum
- Supply voltage: 230VAC 50Hz 1-phase; 230/400VAC 50Hz 260/460VAC 60Hz 3-phase; 480VAC 60Hz 3-phase UL; 115VAC 60Hz 1-phase; 115VAC 60Hz 1-phase UL
- Outlets: 1 Outlet
- Product type
- Electric lubrication pump
- Drive
- Electric motor
Product description
The WS-E is a gear-wheel pump unit for oiling chains, joints, rollers and hinges, and for built-in parts such as an engine crankshaft.
Indus Hydraulics is an authorised Bijur Delimon distributor for the Middle East and supplies genuine units direct from the manufacturer, with the maker's datasheets and manuals.
How it works
It handles mineral oils of 40 to 900 cSt at up to 30 bar (internal relief valve) and can run up to seven cycles a second depending on viscosity. With ZE-E dynamic dividers it places a metered "flying drop" on moving points; it also works with static single-line dividers, or as a delivery pump with a solenoid valve at the end of the main line.
Range
Configured to order from 120 order codes (WSE…). The order-code table below lists every option.
Where it is used
- conveyor and drive chains
- kiln and oven chains
- moving joints and rollers
Choosing the pump
Start from the distribution system the pump has to drive — SLR meter units, PDI injectors, progressive dividers, Dualine valves or direct multi-line feeds — then the lubricant: oil grade in cSt, or grease NLGI class (fluid grease for PDI). Size the reservoir for the refill interval you want, match the supply voltage and enclosure to the machine, and decide how the cycle is controlled: an integral timer or controller, an external controller, or the machine PLC. Level and pressure switches let the control system prove each cycle.
Complete systems
A pump is one part of a lubrication system. With it we supply the Bijur Delimon distribution — meter units, injectors, divider valves or Dualine valves — and the tubing, fittings, controllers and monitoring to match, sized to the number of points and the lubricant. Send us the machine and the lubrication points and we propose the full system.
Order code — WSE Chain Lubrication Unit
The order code is WSE followed by one code from each position below, in order. Bijur Delimon lists 120 valid combinations; send us the code (or the options) and we confirm it with the manufacturer before quoting.
| Position | Option | Code | Meaning |
|---|---|---|---|
| 1 | Number of Outlets | 01 | 1 Outlet |
| 2 | Revision | A | Revision A |
| 3 | Drive Motor Type | 01 | 230VAC 50Hz 1-phase |
| 02 | 230/400VAC 50Hz 260/460VAC 60Hz 3-phase | ||
| 05 | 480VAC 60Hz 3-phase UL | ||
| 06 | 115VAC 60Hz 1-phase | ||
| 15 | 115VAC 60Hz 1-phase UL | ||
| 4 | Cycle Solenoid Valve Voltage | 24 | 24VDC 3/2 |
| 23 | 230VAC 3/2 | ||
| 12 | 115VAC 3/2 | ||
| 5 | Reservoir | A | 4 Liter Metal |
| B | 12 Liter Aluminum | ||
| 6 | Accessories | 00 | None |
| 01 | Float switch for 4 liter, 2x min, 12-48V | ||
| 02 | Float switch for 4 liter, 2x min, 250V | ||
| 03 | Float switch for 12 liter, 1x min, 250V | ||
| 04 | Terminal box (12-liter version only) | ||
| 05 | Automotive system (PSA) with filling via sealing nipple for 4-liter version | ||
| 06 | Automotive system (PSA) with filling via sealing nipple for 12-liter version |
Examples of valid codes: WSE01A0124A00, WSE01A0124A01, WSE01A0124A02.
Spare parts
Genuine Bijur Delimon service parts and kits for this range are listed by part number on Bijur Delimon WS-E Chain Lubrication Unit Service Kits.
Documents
Bijur Delimon's manuals and service sheets for this range are in the Downloads tab.
Identification
| Parameter | Value |
|---|---|
| Product type | Electric lubrication pump |
| Series | Bijur Delimon WS-E Chain Lubrication Units |
| Drive | Electric motor |
Ordering
| Parameter | Value |
|---|---|
| Order code | WSE… (120 codes) |
| Supply | Genuine Bijur Delimon, direct from the manufacturer (authorised distributor) |
Performance
| Parameter | Value |
|---|---|
| Outlets | 1 Outlet |
| Reservoir | 4 Liter Metal; 12 Liter Aluminum |
Electrical
| Parameter | Value |
|---|---|
| Supply voltage | 230VAC 50Hz 1-phase; 230/400VAC 50Hz 260/460VAC 60Hz 3-phase; 480VAC 60Hz 3-phase UL; 115VAC 60Hz 1-phase; 115VAC 60Hz 1-phase UL |
Shipping & lead time
What are Bijur Delimon WS-E Chain Lubrication Units?▾
How do I read the order code for Bijur Delimon WS-E Chain Lubrication Units?▾
Which part numbers and versions does Bijur Delimon WS-E Chain Lubrication Units cover?▾
How do I choose the right WS-E Chain Lubrication Units for my machine?▾
What pressure, output and reservoir ratings do Bijur Delimon WS-E Chain Lubrication Units have?▾
What material and finish is Bijur Delimon WS-E Chain Lubrication Units supplied in?▾
Which datasheets and approvals are available for Bijur Delimon WS-E Chain Lubrication Units?▾
Can Bijur Delimon WS-E Chain Lubrication Units be supplied as part of a complete lubrication system?▾
Do you supply spare parts and service kits for Bijur Delimon WS-E Chain Lubrication Units?▾
Where are Bijur Delimon WS-E Chain Lubrication Units typically used?▾
How do Bijur Delimon WS-E Chain Lubrication Units differ from Bijur Delimon JS and JSP DC Lubricators?▾
Do you keep Bijur Delimon WS-E Chain Lubrication Units in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








