
Banjo Metric — SS316L stainless-steel Banjo hose fitting, banjo, male. Passivated 316L for chemical, marine, and food-grade hydraulic service.
Key features
- Fitting Configuration: banjo
- Thread Form: Metric M10×1 to M22×1.5 (banjo eye + bolt)
- Sealing Form: Bonded-seal washers on bolt (DIN 7642 banjo)
- Nominal Size Range: M10×1 to M22×1.5
- Fitting Configuration
- banjo
- Thread Form
- Metric M10×1 to M22×1.5 (banjo eye + bolt)
- Sealing Form
- Bonded-seal washers on bolt (DIN 7642 banjo)
- Nominal Size Range
- M10×1 to M22×1.5
Product description
The Banjo Metric is a SS316L stainless-steel hydraulic hose fitting in the banjo configuration. Manufactured from 316L (austenitic, low-carbon, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Construction
- Configuration: banjo
- Thread form: Metric M10×1 to M22×1.5 (banjo eye + bolt)
- Sealing form: Bonded-seal washers on bolt (DIN 7642 banjo)
- Gender: male
- Material: 316L stainless steel (austenitic, low-carbon, marine grade)
- Surface treatment: Passivated 316L (no plating; native corrosion-resistant oxide layer)
Performance
Pressure rating tracks the host hose grade and ferrule when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316L resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Applicable Standards
- ISO 228-1 (BSPP)
- DIN 7642
How to order
Specify (a) the host hose grade and bore size, (b) the matching SS316L crimp ferrule (also available from Indus), and (c) the thread size on the SS316L body. Indus crimps and pressure-tests the assembly on request.
Companion products
Pair with Indus SS316L crimp ferrules and the matching SS316L hose grade for a fully stainless assembly. Browse the SS316L Fittings sub-section under Hoses & Fittings for matching thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | banjo |
| Thread Form | Metric M10×1 to M22×1.5 (banjo eye + bolt) |
| Sealing Form | Bonded-seal washers on bolt (DIN 7642 banjo) |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | M10×1 to M22×1.5 |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel (austenitic, low-carbon, marine grade) |
| Surface Treatment | Passivated 316L (no plating; native corrosion-resistant oxide layer) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 7642 |
Shipping & lead time
What is the Banjo Metric used for?▾
Which sizes does the Banjo Metric come in?▾
How do I pick the bolt thread for a Banjo Metric?▾
What pressure rating does the Banjo Metric have?▾
What is the Banjo Metric made from, and where does stainless suit it?▾
Which standards does the Banjo Metric follow?▾
What does the Banjo Metric connect to?▾
How do I stop a stainless Banjo Metric from leaking at the washers?▾
Which equipment uses a metric banjo fitting in stainless steel?▾
Banjo Metric or Banjo BSP: what is the difference?▾
Where is the Banjo Metric supplied from, and can it be exported from Dubai?▾
Is the Banjo Metric in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- metrisch Außengewinde Ringstück (Banjo)
- fr
- mâle métrique banjo
- es
- macho métrica banjo
- it
- maschio metrica banjo
From the blog

