Banjo BSP — SS316L stainless-steel Banjo hose fitting, banjo, male. Passivated 316L for chemical, marine, and food-grade hydraulic service.
Key features
- Fitting Configuration: banjo
- Thread Form: BSPP G1/8 to G3/4 (banjo eye + bolt)
- Sealing Form: Bonded-seal washers on bolt (DIN 7642 banjo)
- Nominal Size Range: G1/8 to G3/4
- Fitting Configuration
- banjo
- Thread Form
- BSPP G1/8 to G3/4 (banjo eye + bolt)
- Sealing Form
- Bonded-seal washers on bolt (DIN 7642 banjo)
- Nominal Size Range
- G1/8 to G3/4
Product description
The Banjo BSP is a SS316L stainless-steel hydraulic hose fitting in the banjo configuration. Manufactured from 316L (austenitic, low-carbon, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Construction
- Configuration: banjo
- Thread form: BSPP G1/8 to G3/4 (banjo eye + bolt)
- Sealing form: Bonded-seal washers on bolt (DIN 7642 banjo)
- Gender: male
- Material: 316L stainless steel (austenitic, low-carbon, marine grade)
- Surface treatment: Passivated 316L (no plating; native corrosion-resistant oxide layer)
Performance
Pressure rating tracks the host hose grade and ferrule when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316L resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Applicable Standards
- ISO 228-1 (BSPP)
- DIN 7642
How to order
Specify (a) the host hose grade and bore size, (b) the matching SS316L crimp ferrule (also available from Indus), and (c) the thread size on the SS316L body. Indus crimps and pressure-tests the assembly on request.
Companion products
Pair with Indus SS316L crimp ferrules and the matching SS316L hose grade for a fully stainless assembly. Browse the SS316L Fittings sub-section under Hoses & Fittings for matching thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | banjo |
| Thread Form | BSPP G1/8 to G3/4 (banjo eye + bolt) |
| Sealing Form | Bonded-seal washers on bolt (DIN 7642 banjo) |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | G1/8 to G3/4 |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel (austenitic, low-carbon, marine grade) |
| Surface Treatment | Passivated 316L (no plating; native corrosion-resistant oxide layer) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228-1 (BSPP), DIN 7642 |
Shipping & lead time
Why SS316L instead of carbon steel?▾
What thread form does this fitting use?▾
What is the sealing form?▾
What is the maximum working pressure?▾
What sizes are available?▾
Which crimp ferrule should I pair with this fitting?▾
Is crimping included?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- BSP Außengewinde Ringstück (Banjo)
- fr
- mâle BSP banjo
- es
- macho BSP banjo
- it
- maschio BSP banjo
