API 6A Gate Valve, 4-1/8″, 5,000 psi

4-1/8″ API 6A gate valve, 5,000 psi (5K). Supplied new from Cameron to your PSL, PR, material and temperature class.
Key features
- Valve Type: Gate valve — manual handwheel; hydraulic on request
- Nominal Size: 4-1/8 in
- Working Pressure: 5000 psi
- End Connection (Inlet): API 6A flanged
- Service Class: Standard or sour service (NACE MR0175 / ISO 15156) by material class
- Valve Type
- Gate valve — manual handwheel; hydraulic on request
- Nominal Size
- 4-1/8 in
- Working Pressure
- 5000 psi
- Pressure Class
- 5K
- API Specification
- API 6A
Product description
A 4-1/8″ (105 mm) gate valve to API 6A, rated 5,000 psi working pressure (5K). We supply it new from Cameron, and other API 6A manufacturers, to the PSL, PR, material class and temperature class you specify. The table lists the models and nameplate markings we have seen at this bore and rating, so you can quote a make and model directly.
Makes and models at this rating
| Make | Model | Part / assembly no. | PSL | PR | Material class | Temperature |
|---|---|---|---|---|---|---|
| Cameron | FL | — | — | PR2 | BB | P+U |
Each row is what is marked on a valve we have photographed at this bore and pressure; a dash means the nameplate does not state it or is not legible. Your valve is built to the specification you put on the RFQ, not to these plates.
Rating, test and flanges
- Working pressure: 5,000 psi. API 6A shell test: 10,000 psi.
- Bore: full bore — the bore matches the nominal size, so wireline tools and pigs pass through.
Reading the nameplate
- PSL (product specification level, 1 to 4) sets the inspection, testing and traceability applied. PSL 3G adds a gas test.
- PR (performance requirement) is PR1 or PR2; PR2 valves have passed the design-validation testing in API 6A.
- Material class AA to CC is general service. DD, EE, FF and HH are sour service to NACE MR0175 / ISO 15156; a suffix such as -0.5 or -1.5 is the maximum H₂S partial pressure in psia, and NL means no limit.
- Temperature class letters combine: P = −20 °F to +180 °F; U = 0 °F to +250 °F. P+U covers −20 °F to +250 °F.
Ordering
Put the bore, pressure, end connections, PSL, PR, material and temperature class on your RFQ, with a preferred make and model if you have one. We confirm lead time and documentation — including the API 6A monogram and material certificates — on the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve Type | Gate valve — manual handwheel; hydraulic on request |
| Makes available | Cameron |
| Models seen | FL |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 4-1/8 in |
| End Connection (Inlet) | API 6A flanged |
| End Connection (Outlet) | API 6A flanged |
| Bore Type | Full bore |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 5000 psi |
| Pressure Class | 5K |
| Service Class | Standard or sour service (NACE MR0175 / ISO 15156) by material class |
| Hydrostatic shell test | 10,000 psi |
| Temperature markings seen | P+U |
Compliance
| Parameter | Value |
|---|---|
| API Specification | API 6A |
| PSL Class | PSL 1–4 to order |
| PR Class | PR2 marked; to order |
| Material Class (API 6A) | BB marked; AA–HH to order |
Shipping & lead time
What is a 4-1/8 in API 6A gate valve rated 5,000 psi used for?▾
What do PSL, PR and material class mean on a 4-1/8 in 5K API 6A gate valve?▾
What end connections does the 4-1/8 in 5K API 6A gate valve have?▾
Should I choose the 4-1/8 in 5,000 psi gate valve or the 3-1/8 in at the same 5K rating?▾
What are the working pressure and test pressure of a 4-1/8 in 5K API 6A gate valve?▾
Which material class do I need on a 4-1/8 in 5,000 psi API 6A gate valve for sour service?▾
Is the 4-1/8 in 5,000 psi API 6A gate valve API monogrammed and what documents come with it?▾
Which makes and models of 4-1/8 in 5,000 psi gate valve can you supply?▾
What temperature class does a 4-1/8 in 5,000 psi API 6A gate valve carry?▾
Is a 4-1/8 in 5K API 6A gate valve the same as a 7,500 psi mud gate valve?▾
Can a 4-1/8 in 5,000 psi gate valve be exported from Dubai, and what about the HS code?▾
Do you stock the 4-1/8 in 5,000 psi API 6A gate valve in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Oilfield & pressure control
Reading an API 6A nameplate: pressure, material class, temperature class, PSL and PR
An API 6A valve or wellhead nameplate packs a specification into a line of codes: EE-1.5, P+U, PSL 3G, PR2. What each one means, how they show up on the valves we list, and what to send when replacing one.
7 min read
Drilling rig equipment
Oteco drilling and wellsite equipment: the range, and how to order it in the Middle East
Oteco Inc. of Houston makes the consumable and wear parts of a drilling rig: mud gate valves, relief valves, gauges, pump pistons, float valves, wipers, BOP rubbers and more. A guide to the range by family, how to identify a part, and how to order it from an authorised Oteco distributor in the UAE.
6 min read
Drilling rig equipment
Model 72 or DM: choosing an Oteco mud gate valve
Oteco makes two mud gate valves. The Model 72 is a rising-stem valve to 5,000 psi with body subs for its ends and a published Cameron Type ‘S’ parts interchange. The DM reaches 7,500 psi and rebuilds in line. How they differ, how to read their model numbers, and which one to specify.
5 min read








