Welding standpipes

Welding standpipes — SS316L stainless-steel Standpipe hose fitting, straight, male. Passivated 316L for chemical, marine, and food-grade hydraulic service.
Key features
- Fitting Configuration: straight
- Thread Form: Tube weld end (DIN 24° sizes L6 to L42, S6 to S38)
- Sealing Form: Welded (no threaded seal)
- Nominal Size Range: Tube OD 6 to 42 mm (light + heavy series)
- Fitting Configuration
- straight
- Thread Form
- Tube weld end (DIN 24° sizes L6 to L42, S6 to S38)
- Sealing Form
- Welded (no threaded seal)
- Nominal Size Range
- Tube OD 6 to 42 mm (light + heavy series)
Product description
The Welding standpipes is a SS316L stainless-steel hydraulic hose fitting in the straight configuration. Manufactured from 316L (austenitic, low-carbon, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Construction
- Configuration: straight
- Thread form: Tube weld end (DIN 24° sizes L6 to L42, S6 to S38)
- Sealing form: Welded (no threaded seal)
- Gender: male
- Material: 316L stainless steel (austenitic, low-carbon, marine grade)
- Surface treatment: Passivated 316L (no plating; native corrosion-resistant oxide layer)
Performance
Pressure rating tracks the host hose grade and ferrule when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316L resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Applicable Standards
- DIN 2353
- ISO 8434-1
How to order
Specify (a) the host hose grade and bore size, (b) the matching SS316L crimp ferrule (also available from Indus), and (c) the thread size on the SS316L body. Indus crimps and pressure-tests the assembly on request.
Companion products
Pair with Indus SS316L crimp ferrules and the matching SS316L hose grade for a fully stainless assembly. Browse the SS316L Fittings sub-section under Hoses & Fittings for matching thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | Tube weld end (DIN 24° sizes L6 to L42, S6 to S38) |
| Sealing Form | Welded (no threaded seal) |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | Tube OD 6 to 42 mm (light + heavy series) |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel (austenitic, low-carbon, marine grade) |
| Surface Treatment | Passivated 316L (no plating; native corrosion-resistant oxide layer) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353, ISO 8434-1 |
Shipping & lead time
What is the Welding standpipes used for?▾
Which sizes does the Welding standpipes come in?▾
How do I choose the size and series of a welding standpipe?▾
What pressure rating does the Welding standpipes have?▾
What is the Welding standpipes made from, and where does stainless suit it?▾
Which standards does the Welding standpipes follow?▾
What does the Welding standpipes connect to?▾
What should I do before welding a stainless standpipe?▾
Where is the Welding standpipes used?▾
Welding standpipes or Metric standpipe for DIN 2353 fittings: how do I choose?▾
Where is the Welding standpipes supplied from, and can it be exported from Dubai?▾
Is the Welding standpipes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Buying fittings & adapters
316L stainless hydraulic fittings: what the range covers, and how it behaves differently
BSP, JIC, ORFS, metric, NPT and NPSM, SAE flanges, standpipes and banjos, all in passivated 316L. What each family covers, the pressure and bolting rules on the flanges, and the galling problem.
4 min read
Stainless steel fittings
316L stainless hose fittings: when a hose end has to be stainless, and the forms available
On a deck crane or a washdown line the hose often outlives its plated fittings — the ends rust first. 316L stainless hose fittings fix that, in every common end form: BSP 60° cone and flat seat, JIC 37°, ORFS, NPSM, metric 24°, SAE Code 61 and 62 flange heads, banjos, double-hex swivels and standpipes. When stainless is worth it, what changes with a stainless hose end, and how to specify one.
6 min read





