Gas tube standpipes
Gas tube standpipes — SS316L stainless-steel Standpipe hose fitting, straight, male. Passivated 316L for chemical, marine, and food-grade hydraulic service.
Key features
- Fitting Configuration: straight
- Thread Form: Gas tube end (BSPP / DIN 2353 compatible)
- Sealing Form: 24° cone (DIN 2353)
- Nominal Size Range: Tube OD 6 to 42 mm (light + heavy series)
- Fitting Configuration
- straight
- Thread Form
- Gas tube end (BSPP / DIN 2353 compatible)
- Sealing Form
- 24° cone (DIN 2353)
- Nominal Size Range
- Tube OD 6 to 42 mm (light + heavy series)
Product description
The Gas tube standpipes is a SS316L stainless-steel hydraulic hose fitting in the straight configuration. Manufactured from 316L (austenitic, low-carbon, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Construction
- Configuration: straight
- Thread form: Gas tube end (BSPP / DIN 2353 compatible)
- Sealing form: 24° cone (DIN 2353)
- Gender: male
- Material: 316L stainless steel (austenitic, low-carbon, marine grade)
- Surface treatment: Passivated 316L (no plating; native corrosion-resistant oxide layer)
Performance
Pressure rating tracks the host hose grade and ferrule when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316L resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Applicable Standards
- DIN 2353
- ISO 8434-1
How to order
Specify (a) the host hose grade and bore size, (b) the matching SS316L crimp ferrule (also available from Indus), and (c) the thread size on the SS316L body. Indus crimps and pressure-tests the assembly on request.
Companion products
Pair with Indus SS316L crimp ferrules and the matching SS316L hose grade for a fully stainless assembly. Browse the SS316L Fittings sub-section under Hoses & Fittings for matching thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | Gas tube end (BSPP / DIN 2353 compatible) |
| Sealing Form | 24° cone (DIN 2353) |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | Tube OD 6 to 42 mm (light + heavy series) |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel (austenitic, low-carbon, marine grade) |
| Surface Treatment | Passivated 316L (no plating; native corrosion-resistant oxide layer) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353, ISO 8434-1 |
Shipping & lead time
Why SS316L instead of carbon steel?▾
What thread form does this fitting use?▾
What is the sealing form?▾
What is the maximum working pressure?▾
What sizes are available?▾
Which crimp ferrule should I pair with this fitting?▾
Is crimping included?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade BSP Außengewinde 24° Konus
- fr
- mâle BSP cône 24°
- es
- macho BSP cono 24°
- it
- maschio BSP cono 24°
