Skip to content

Triple Offset Butterfly Valve, Metal Seated, API 609

Butterfly ValvesEx-stock · delivery in 3 days
Triple offset butterfly valve, metal-seated flanged body with laminated seal ring and gear operator
VIEW 01·Triple offset butterfly valve, metal-seated flanged body with laminated seal ring and gear operator

Triple offset metal-seated butterfly valves: NPS 2" to 160", Class 150 to 2500 (API 609 to Class 600 and NPS 60), -196 °C to 650 °C, laminated seal ring, zero leakage, fire-safe to API 607.

Key features

  • Valve type: Butterfly valve, triple offset, metal seated
  • Construction: Triple offset disc, laminated seal ring, stellite-faced seat
  • Design standard: API 609 Category B (Class 150 to 600, to NPS 60); larger sizes and Class 900 to 2500 to ASME B16.34
  • Size range: NPS 2" to 160" (DN50 to DN4000)
  • Pressure class: ASME Class 150 to 2500
  • Body material: Carbon steel, stainless steel, alloy steel, duplex
  • End connections: Wafer, lug, double flanged (RF), butt-weld
  • Operation: Gear operator, pneumatic, electric or hydraulic actuator
Valve type
Butterfly valve, triple offset, metal seated
Design standard
API 609 Category B (Class 150 to 600, to NPS 60); larger sizes and Class 900 to 2500 to ASME B16.34
Pressure class
ASME Class 150 to 2500
End connections
Wafer, lug, double flanged (RF), butt-weld
Operation
Gear operator, pneumatic, electric or hydraulic actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The butterfly valve for duties that would wreck a soft seat: high-temperature steam, hydrocarbons, cryogenic and abrasive service. The third offset, a conical seat angle, means the disc touches the seat only at the moment of closing, so it seals metal to metal without rubbing, with torque seating rather than position seating.

A butterfly valve closes by turning a disc a quarter turn across the bore. The body is short and light for its size, which is why butterfly valves take over from gate and ball valves on large lines, in water, utility, process and pipeline service.

Construction

  • Three offsets: stem behind the seat, off the centreline, and a conical seat angle
  • Laminated seal ring (graphite and stainless) against a stellite-faced body seat
  • Blow-out proof stem, extended bearings, low-emission packing on request
  • Wafer, lug, double-flanged or butt-weld; ISO 5211 top flange for actuation

Sizes and ratings

Published range: NPS 2" to 160" (DN50 to DN4000), ASME Class 150 to 2500, in carbon steel, stainless steel, alloy steel, duplex. End connections: Wafer, lug, double flanged (RF), butt-weld. Operation: gear operator, pneumatic, electric or hydraulic actuator.

The size table below lists 132 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.

Testing and documents

Shell and seat tests to API 598 (API 609), with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Triple offset butterfly valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other butterfly valves in the range, for comparison when the duty is not settled yet: Concentric Butterfly Valve, Rubber Lined, Double Offset Butterfly Valve, API 609.

Identification

ParameterValue
Valve typeButterfly valve, triple offset, metal seated
ConstructionTriple offset disc, laminated seal ring, stellite-faced seat

Standards

ParameterValue
Design standardAPI 609 Category B (Class 150 to 600, to NPS 60); larger sizes and Class 900 to 2500 to ASME B16.34
Face-to-face / end-to-endAPI 609; ASME B16.10 long pattern
Pressure testingShell and seat tests to API 598 (API 609)
Fire-safe designAPI 607
Fugitive emissionsLow-emission packing to ISO 15848 on request

Range

ParameterValue
Size rangeNPS 2" to 160" (DN50 to DN4000)
Pressure classASME Class 150 to 2500
Temperature range-196 °C to 650 °C

Materials

ParameterValue
Body materialCarbon steel, stainless steel, alloy steel, duplex
Seat and trimLaminated graphite and stainless seal ring; stellite-faced seat

Construction

ParameterValue
End connectionsWafer, lug, double flanged (RF), butt-weld
OperationGear operator, pneumatic, electric or hydraulic actuator

Application

ParameterValue
Typical serviceSteam, hydrocarbons, cryogenic, high temperature, isolation and control

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at