Concentric Butterfly Valve, Rubber Lined

Concentric (zero offset) butterfly valves with a fully rubber-lined body: NPS 2" to 72", Class 125/150 and PN6 to PN16, wafer, lug or double-flanged, EPDM, NBR or FKM liner.
Key features
- Valve type: Butterfly valve, concentric (rubber lined)
- Construction: Fully rubber-lined body, centred disc and stem
- Design standard: API 609 Category A (to NPS 60), EN 593
- Size range: NPS 2" to 72" (DN50 to DN1800)
- Pressure class: Class 125/150, PN6 to PN16
- Body material: Ductile iron, carbon steel, stainless steel, bronze
- End connections: Wafer, lug, double flanged
- Operation: Lever, gear operator, pneumatic, electric or hydraulic actuator
- Valve type
- Butterfly valve, concentric (rubber lined)
- Design standard
- API 609 Category A (to NPS 60), EN 593
- Pressure class
- Class 125/150, PN6 to PN16
- End connections
- Wafer, lug, double flanged
- Operation
- Lever, gear operator, pneumatic, electric or hydraulic actuator
Product description
The economical butterfly valve for water, cooling water, utilities and many chemicals. The stem runs through the centre of the disc, and the disc closes into a rubber liner that covers the whole bore, so the fluid touches only the liner and the disc and never the body.
A butterfly valve closes by turning a disc a quarter turn across the bore. The body is short and light for its size, which is why butterfly valves take over from gate and ball valves on large lines, in water, utility, process and pipeline service.
Construction
- Fully rubber-lined body; EPDM, NBR or FKM (Viton) liner to suit the fluid
- Disc in ductile iron, stainless steel or coated, on a one-piece or two-piece stem
- Wafer, lug or double-flanged body
- Lever up to about 8", gear operator above, or actuator on an ISO 5211 top flange
Sizes and ratings
Published range: NPS 2" to 72" (DN50 to DN1800), Class 125/150, PN6 to PN16, in ductile iron, carbon steel, stainless steel, bronze. End connections: Wafer, lug, double flanged. Operation: lever, gear operator, pneumatic, electric or hydraulic actuator.
The size table below lists 60 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.
Testing and documents
Shell and seat tests to API 598 (API 609), with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Concentric butterfly valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other butterfly valves in the range, for comparison when the duty is not settled yet: Double Offset Butterfly Valve, API 609, Triple Offset Butterfly Valve, Metal Seated, API 609.
Identification
| Parameter | Value |
|---|---|
| Valve type | Butterfly valve, concentric (rubber lined) |
| Construction | Fully rubber-lined body, centred disc and stem |
Standards
| Parameter | Value |
|---|---|
| Design standard | API 609 Category A (to NPS 60), EN 593 |
| Face-to-face / end-to-end | API 609 / EN 558 |
| Pressure testing | Shell and seat tests to API 598 (API 609) |
Range
| Parameter | Value |
|---|---|
| Size range | NPS 2" to 72" (DN50 to DN1800) |
| Pressure class | Class 125/150, PN6 to PN16 |
| Temperature range | -35 °C to 200 °C, depending on liner |
Materials
| Parameter | Value |
|---|---|
| Body material | Ductile iron, carbon steel, stainless steel, bronze |
| Seat and trim | EPDM, NBR or FKM liner |
Construction
| Parameter | Value |
|---|---|
| End connections | Wafer, lug, double flanged |
| Operation | Lever, gear operator, pneumatic, electric or hydraulic actuator |
Application
| Parameter | Value |
|---|---|
| Typical service | Water, cooling water, utilities, chemicals |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
Sizes & part numbers
60 sizes- Indus part no.IH-PV-BFC-DF-150-0200
- Type
- Double flanged
- Size
- 2"
- DN
- 50
- Class
- Class 150
- Face to face (mm)
- —
- L (RF) (mm)
- 108
- Weight (kg)
- 8
- Indus part no.IH-PV-BFC-DF-150-0250
- Type
- Double flanged
- Size
- 2-1/2"
- DN
- 65
- Class
- Class 150
- Face to face (mm)
- —
- L (RF) (mm)
- 112
- Weight (kg)
- 11
- Indus part no.IH-PV-BFC-DF-150-0300
- Type
- Double flanged
- Size
- 3"
- DN
- 80
- Class
- Class 150
- Face to face (mm)
- —
- L (RF) (mm)
- 114
- Weight (kg)
- 14
- Indus part no.IH-PV-BFC-DF-150-0400
- Type
- Double flanged
- Size
- 4"
- DN
- 100
- Class
- Class 150
- Face to face (mm)
- —
- L (RF) (mm)
- 127
- Weight (kg)
- 19
- Indus part no.IH-PV-BFC-DF-150-0500
- Type
- Double flanged
- Size
- 5"
- DN
- 125
- Class
- Class 150
- Face to face (mm)
- —
- L (RF) (mm)
- 140
- Weight (kg)
- 24
- Indus part no.IH-PV-BFC-DF-150-0600
- Type
- Double flanged
- Size
- 6"
- DN
- 150
- Class
- Class 150
- Face to face (mm)
- —
- L (RF) (mm)
- 140
- Weight (kg)
- 26
- Indus part no.IH-PV-BFC-DF-150-0800
- Type
- Double flanged
- Size
- 8"
- DN
- 200
- Class
- Class 150
- Face to face (mm)
- —
- L (RF) (mm)
- 152
- Weight (kg)
- 60
- Indus part no.IH-PV-BFC-DF-150-1000
- Type
- Double flanged
- Size
- 10"
- DN
- 250
- Class
- Class 150
- Face to face (mm)
- —
- L (RF) (mm)
- 165
- Weight (kg)
- 80
Show all 60 sizesShow fewer sizes
Type — Valve type of this row, where one listing covers several. Size — Nominal pipe size (NPS), as published. DN — Nominal diameter (DN), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. Face to face — Face-to-face length of a wafer or lug body, which sits between the pipe flanges, as published. L (RF) — Face-to-face length with raised-face flanged ends, as published. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
Lengths are in millimetres and weights in kilograms, as published for each size and class. The end connection, trim, seat and operator you order can change the length and weight, so we confirm the general arrangement drawing with the quotation.
What is the rubber-lined concentric butterfly valve used for?▾
How do I read the rubber-lined concentric butterfly valve part numbers such as IH-PV-BFC-LG-150-1600?▾
What sizes and classes is the rubber-lined concentric butterfly valve available in?▾
What pressure and temperature can the rubber-lined concentric butterfly valve take?▾
What materials is the rubber-lined concentric butterfly valve made in?▾
What tests and documents come with the rubber-lined concentric butterfly valve?▾
How is the rubber-lined concentric butterfly valve operated, and what end connections does it have?▾
rubber-lined concentric butterfly valve: Which liner should I choose?▾
rubber-lined concentric butterfly valve: What pressure can a concentric valve hold?▾
How does the rubber-lined concentric butterfly valve compare with the API 609 double offset butterfly valve?▾
Where is the rubber-lined concentric butterfly valve supplied from?▾
Is the rubber-lined concentric butterfly valve in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog


