Swing Check Valve, Tee Body, 3 in × 1502 F×M, 15,000 psi, Standard Service

The Swing Check Valve, Tee Body, 3 in × 1502 F×M, 15,000 psi, Standard Service is a swing te check valve rated for 15,000 psi working pressure (15K class) with 3 in 1502 Female Weco Union inlet and 3 in 1502 Male Weco Union outlet. Standard service rated.

Tee-body swing-disc design — one inlet leg and a perpendicular outlet leg, with a hinged disc on the inlet path. Used at frac iron junctions where flow combines into a manifold trunk. The tee body absorbs reaction loads cleanly, and the disc seats on the inlet face when reverse flow occurs in the trunk.

Construction

• Type: Check — Swing — Swing TE
• Nominal size: 3 in
• Bore: Full Port
• Body material: Forged AISI 4130
• Trim (disc/dart + seat): 316SS disc + 17-4PH stem/hinge
• Seal / elastomer: RPTFE seats + Viton (FKM) O-rings
• Inlet: 3 in 1502 Female Weco Union
• Outlet: 3 in 1502 Male Weco Union

Performance

Working pressure 15,000 psi. Hydrotested at 1.5× working pressure (shell test); seat-tested per frac-iron flow-control acceptance criteria. Standard service rated for clean hydrocarbon and water-cut streams.

Installation

Install with the flow arrow on the body matching line direction. For swing types, horizontal-with-cover-up is the preferred orientation; vertical-flow-up is also supported. Avoid vertical-flow-down installation (the disc fights gravity to close).

Applications

• Frac iron junction blocks
• Discharge manifold trunk
• 3-inch tee inlets to choke skids
• Sweet 15K service trees

Compliance

• Manufactured to recognised oilfield flow-iron design standards
• Mill test reports per EN 10204 3.1 / 3.2

How to order

Confirm (a) line working pressure and pressure class, (b) inlet and outlet end-connection sizes / styles, (c) service class (standard vs sour), (d) installation orientation (especially for dart-type — vertical-flow-up only), and (e) any flow-velocity or noise constraints (over-spec'd swing checks can chatter at low flow). Indus quotes ex-Dubai for stock items and ex-works OEM for build-to-order items, with full mill test reports and pre-shipment hydrotest certificates.

Companion products

Pair with matched-pressure ball valves, plug valves, gate valves, and SSV/ESDs of the same end-connection family. For frac iron service trees, the 1502/602/206 Weco unions are the matched standard. For wellhead and Christmas tree service, the API 6A 5M/10M/15M flanged geometries pair check valves with master and wing gate valves.