Skip to content
SUN HYDRAULICSIH-SUN-DRAY

Sun Hydraulics 2-Way, Pilot-to-Shift Directional Valve with Drain to Port 4, Normally Open — DRAY

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DRAY pilot-to-shift directional spool valve, series 1, T-21A cavity — dimension drawing
VIEW 01·Sun Hydraulics DRAY pilot-to-shift directional spool valve, series 1, T-21A cavity — dimension drawing
1 / 3

Sun Hydraulics 2-Way, Pilot-to-Shift Directional Valve with Drain to Port 4, Normally Open: DRAY, series 1, .5 gpm (2 L/min), T-21A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Pilot-to-Shift Directional Spool Valve
  • Capacity: .5 gpm (2 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-21A
Valve function
Pilot-to-Shift Directional Spool Valve
Series (frame sizes)
1
Cavity
T-21A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A spool directional cartridge moved by hydraulic pilot pressure instead of a solenoid. The 4-way versions are 6-port valves with supply at port 3 and pilot ports X and Y (ports 5 and 6); all ports, pilot ports included, take 5,000 psi (350 bar). A choice of spools sets the flow paths.

This version

  • Normally open.
  • The spring chamber drains to a separate port 4, so pressure at port 3 does not shift the setting and port 3 can work as a load port.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DRAY — series 1, T-21A cavity, .5 gpm (2 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 20 drops/min. (20 drops/min)

Configuration options

The letters after the base model code choose these options (shown for DRAY; a size may add or drop a choice):

  • Control: C — Tamper Resistant - Factory Set, L — Standard Screw Adjustment
  • Setting range: A — 1000 - 3000 psi (70 - 210 bar), 1000 psi (70 bar) Standard Setting, C — 2000 - 6000 psi (140 - 420 bar), 2000 psi (140 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated

Option rules: If the modifier is /AP, the control must be L.

Selection notes

  • Capacity depends on the spool: flow forces can stop a spool reaching full stroke at high flow and pressure, so higher flows are possible at lower pressures.
  • Check the minimum pilot pressure in the ratings against your pilot supply.

Where it is used

Main-stage directional control piloted from a joystick, a remote pilot valve or a small solenoid pilot.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DRAYLAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionPilot-to-Shift Directional Spool Valve
Series (frame sizes)1
CavityT-21A

Performance

ParameterValue
Capacity.5 gpm (2 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 1000 - 3000 psi (70 - 210 bar), 1000 psi (70 bar) Standard Setting, C — 2000 - 6000 psi (140 - 420 bar), 2000 psi (140 bar) Standard Setting
Max leakage20 drops/min. (20 drops/min)

Configuration

ParameterValue
Control / adjustmentC — Tamper Resistant - Factory Set, L — Standard Screw Adjustment
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006
Weight.30 lb (0,15 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at